How to clear the time and number of hard disk usage

The steps to zero the hard drive are as follows:

Can. Then select the "Advanced" option on the main interface of the software, note that this software can only be operated with a keyboard.

2. Select "Advanced", launch the Utilities option, select "Maintenance Options", and select "Utilities" in the pop-up menu. As shown in the picture above.

3. It is very important to choose the right hard drive.

Once you've selected your hard drive, select "Drives."

Fill all zeros", after which the operation will begin. It takes a long time to clear the hard disk, a 40GB hard disk will take more than 2 hours to complete the operation, and the time taken increases according to the capacity of the hard disk.

4. Select "Drive Fill All Zero", and you can clear it.

Note: Wrong operation will cause damage to the hard drive.

Zeroing – an electronic term: Zeroing is an instruction. In electronic computer hardware, there are calculators, accumulators, ** memory, external memory.

address memory, etc. Using the zeroing instruction, the state (data) of the memory can be changed to the original zero state. That is, the memory is flipped from a high potential (representing logic 1) to a low potential (representing logic 0).

Data clearing: recalculated in the second month of mobile phone**; Some merchants recalculate various points after they expire.

This requires software, connect the computer with the cable bar, open the software, format the hard drive, and you can sort the hard disk heads, the same as new, I've seen people get it, but I don't have the software.

There is no way. Software from the manufacturer. We generally don't have a way.

The hard disk usage time is cleared, and Master Lu can't measure it.

With TTL cable and hard disk mass production software, you can clear the hard disk usage time and times and data to zero. There is also the same that can be repaired to shield bad blocks equal to computer detection equal to new.

Generally speaking, it is normal for a newly purchased computer hard disk to be used for less than 20 hours. Because the hard drive may have been tested at the factory. If the use time is more than 20 hours, it may be a second-hand phone or a 7-day return machine without a reason.

You can use HD Tune to detect it.

A computer's hard disk is the most important storage device for a computer. Hard disk drive (known as hard disk drive in Hong Kong and Taiwan, English name: Hard Disk Drive for short, full name Winchester hard disk) is composed of one or more aluminum or glass discs.

These discs are covered with ferromagnetic material. The vast majority of hard drives are fixed hard drives that are permanently sealed and fixed in the hard drive.

Before buying a computer, you must first determine what the user is buying the computer for and what work you need the computer to do for it. Only by clarifying the purpose of your purchase can you establish the right purchase plan.

Number of times the disk is used = Cumulative number of power ons. Equivalent to the number of boots, the theoretical life of the hard disk is more than 30,000 hours.

To erase the hard drive, you can write all the data bits on the hard drive to "0" and completely rewrite all the data bits of the hard drive to their factory state. This write does not cause any harm to the hard drive, and the effect is similar to that of a low grid.

Steps: 1. Open the crystaldiskinfo software, and you will see some basic specifications and models of our own hard disk. Here we focus on the time of use.

2. Open Disk Manager & Partner.

3. Select Advanced Mode.

4. After entering the software, we select the "Utilities" drive to fill in all zeros.

5. Wait for the software to run and restart the computer.