How do I clear the record of the usage time of my hard drive?

To erase the hard drive, you can write all the data bits on the hard drive to "0" and completely rewrite all the data bits of the hard drive to their factory state. This write does not cause any harm to the hard drive, and the effect is similar to that of a low grid.

Steps: 1. Open the crystaldiskinfo software, and you will see some basic specifications and models of our own hard disk. Here we focus on the time of use.

2. Open Disk Manager & Partner.

3. Select Advanced Mode.

4. After entering the software, we select the "Utilities" drive.

Fill with all zero. <>

5. Wait for the software to run and restart the computer.

This requires third-party software, take crystaldiskinfo viewing, DM clearing as an example to introduce the method:

2.Run DM, select "Advanced" on the main interface, then select "Maintenance", select "Utilities" in the pop-up menu, and select Drive Fill to Zero.

3.Reboot at the end of the run, and the hard drive will be erased for a lifetime.

Hello, hard disk usage time can not be eliminated, as long as you use detection software can detect the usage time, I hope it will be useful to you.

The hard disk usage time is cleared, and Master Lu can't measure it.

diskgen seems to be okay, but isn't it fake?

SSD SSD.

The usage time cannot be cleared.

There are two types of storage media for solid-state drives, one is to use flash memory (flash chip) as the storage medium, and the other is to use DRAM as the storage medium.

Flash-based SSDs: Flash-based SSDs (IDEflash disk, Serial ATA flash disk): use flash chips as the storage medium, which is also commonly referred to as SSD.

Its appearance can be made into a variety of shapes, such as laptop hard drives.

Micro hard drives, memory cards.

U disk and other styles.

The biggest advantage of this SSD is that it can be moved, and the data protection is not controlled by the power supply, it can be adapted to various environments, and it is suitable for individual users. Generally speaking, it is generally about 3000 times, taking the commonly used 64G as an example, under the balanced writing mechanism of SSD, the total amount of data that can be erased is 64G x 3000 = 192000G. Chang Chun.

It's difficult. Each main control has its own special tools, there is no universal one, and the firmware of different brands is not the same as the main control, and the mainstream tools are not widely flowed out, so it is impossible to clear the information such as the use time.

The main control board of the manufacturer has special tools.

It is impossible to circulate in the market.

The firmware of different brands is different from the main control.

It takes a professional to do this.

You should consult your local hardware dealer on your own.

Or hardware repairers, maybe they have a way.

Why clear the use time, thinking of this question, I stopped,

The hard disk usage time is cleared, and Master Lu can't measure it.

It is impossible to use software to remove the number of times the hard disk is powered on and the time it is used.

The steps to zero the hard drive are as follows:

Can. Then select the "Advanced" option on the main interface of the software, note that this software can only be operated with a keyboard.

2. Select "Advanced", launch the Utilities option, select "Maintenance Options", and select "Utilities" in the pop-up menu. As shown in the picture above.

3. It is very important to choose the right hard drive.

Once you've selected your hard drive, select "Drives."

Fill all zeros", after which the operation will begin. It takes a long time to clear the hard disk, a 40GB hard disk will take more than 2 hours to complete the operation, and the time taken increases according to the capacity of the hard disk.

4. Select "Drive Fill All Zero", and you can clear it.

Note: Wrong operation will cause damage to the hard drive.

Zeroing – an electronic term: Zeroing is an instruction. In electronic computer hardware, there are calculators, accumulators, ** memory, external memory.

address memory, etc. Using the zeroing instruction, the state (data) of the memory can be changed to the original zero state. That is, the memory is flipped from a high potential (representing logic 1) to a low potential (representing logic 0).

Data clearing: recalculated in the second month of mobile phone**; Some merchants recalculate various points after they expire.

You need software, connect to the computer with a cable cable, open the software, format the hard drive, you can sort the hard disk heads, the same as new, I've seen people get it, but I don't have the software.

There is no way. Software from the manufacturer. We generally don't have a way.

The hard disk usage time is cleared, and Master Lu can't measure it.

With TTL cable and hard disk mass production software, you can clear the hard disk usage time and times and data to zero. There is also the same that can be repaired to shield bad blocks equal to computer detection equal to new.