How the camera is connected to the phone, and how the phone is connected to the camera

If you are using a vivo mobile phone, you can check how to use OTG:

1. Turn on the OTG function (if there is no switch, it means that the model does not support it):

originos/funtouch os

UI and above: Go to the phone settings - Other networks and connections - OTG, and turn on the OTG function;

2. Connect one end of the OTG cable to the charging port of the mobile phone, and the other end to the mouse and USB flash drive.

or other external devices.

Not all Canon cameras are connected to mobile phones, EOS with WiFi

6d、70d、

remote software, initiate wireless communication on the camera, and then connect the smartphone. There is a phone icon in the camera menu, select it. EOS on mobile

From the remote settings menu, select OK Change settings, and then select Change settings.

There are two ways to connect:

1. Select [Camera Access Point Mode].

1. Check Easy Connection. And it worked. At this time, you can use your mobile EOS

Remote access to the camera, you can browse the ** on the camera and shoot with the remote control camera.

2. Of course, you can also check the encrypted connection, the camera gives the key, and set the wifi on the only mobile phone: turn on the mobile phone wifi, enter the key, and then start EOS

remote software, connect the camera, and that is, it is successful.

2. Select Infrastructure Mode

The camera and phone are under the same wifi.

1. Looking for the Internet, commonly known as letting the camera go online.

Display the camera's wireless settings, key, IP address, MAC address, etc., which are used by mobile phones.

2. Mobile phone Internet access, everyone will do this, start EOS

remote.

The mobile phone software detects the camera, once the camera is detected, it will be listed in the detected camera, click to access the camera. Save the connection settings on the camera to establish the connection. Your phone will allow you to browse the camera** and control your phone remotely.

Final adding: 1There are also those models of Canon cameras that have this function, I am not knowledgeable, I hope friends will add.

2.I feel that the first connection method is the simplest, it can be used when there is no wifi, and the camera itself is a wifi hotspot. Especially in the suburbs, it is very applicable.

If you are using a vivo mobile phone, you can check how to use OTG:

1. Turn on the OTG function (if there is no switch, Zhen Zheng means that the model is not supported):

originos/funtouch os

UI and above: Go to the phone settings - Other networks and connections - OTG, and turn on the OTG function;

Funtouch OS is as follows: Go to Settings -- More Destruction and More Settings -- OTG, and turn on the OTG function;

2. Connect the first end of the OTG cable to the charging port of the mobile phone, and connect the mouse and USB flash drive to the other end.

or other external devices.

How to connect the <> camera to your phone:

1. It is necessary to build a bridge between the camera and the mobile phone that can be connected to each other, which can be used in the app store.

2. Find the wifi settings in the camera, make sure the wifi is turned on, and click the wifi function option;

3. After entering the wifi function settings, click the icon of the mobile phone on the camera;

4. Find the connection in the connection method and click OK, that is, open a personal hotspot with the camera;

Dear, hello, I'm glad to answer for you: How to connect to a mobile phone with a camera The camera method to connect a mobile phone is as follows: 1. Make sure your phone is connected to a Wi-Fi network, scan the user guide of the surveillance camera with your mobile phone (or search for [Huawei Smart Camera] in the app store), **The app and install it.

2. Open the HUAWEI Smart Camcorder app, or follow the prompts to register and log in to Huawei (if you are using a non-Huawei or Honor phone, the app will prompt you to require HUAWEI Mobile Service, confirm the installation). 3. After powering on the surveillance camera, wait for the camera to turn on and complete the self-test. 4. When the camera indicator flashes, click Add Camera on the mobile app, select XX Smart Camera, and enter the Wi-Fi password as instructed by the Shimu interface; 5. The application pops up***, scan it with the surveillance camera***, and connect the device according to the prompts.

Turn on your phone and tap the camera function to enter the camera's photo mode.

Please click Enter a description.

Find the camera's settings function, and my camera settings are just by swiping the screen to the right with your hand. Swipe down in Settings to find and hold the shutter.

Please click Enter a description.

Click into Qin Hong, there are functions of continuous shooting and focusing, select the function of continuous shooting.

Please click Enter a description.

Go back to the shooting interface, point your phone at the image you want to shoot, and press and hold the shutter.

Please click Enter a description.

You will see that the shutter will constantly display consecutive numbers, which is the number of consecutive shots. After taking a photo, click on the album to find your continuous shooting**. You will see that the continuous shooting is formed into a folder form, click on this file chain side.

You can choose the right one of these bursts.

Please click Enter a description.

Please click Enter a description.

After you have made the selection, click Save in the upper right corner, and select Keep All or Keep Only the selected **.

Please click Enter a description.

Please click Enter a description.