My Dopod S1 often shuts down automatically? 10

The solution to the Dopod S1 automatic shutdown:

1. Confirm whether the contact between the battery and the mobile phone battery connector is reliable and normal. If it is found to be loose, there is a hidden danger that will lead to automatic shutdown. You can improve the contact between the two by adding a "pad", which is simply to squeeze the battery tightly and don't let it shake casually.

2. There is a virtual welding phenomenon in the nickel strip inside the battery or the link between the protection plate and the battery cell, which will also lead to unstable power supply and automatic shutdown. It is recommended to replace the battery in this matter.

3. If the motherboard fails, there is usually a problem with the CPU, memory or PM (power management), resulting in unstable power supply, and it needs to be repaired. Most people don't know, according to the mobile phone three guarantees law, mobile phone products are repaired within 1 year, if the manufacturer refuses, you can call 12315 to complain or report to the consumer association.

4. Software failure, because there is a bug in the software operation, the internal mechanism automatically determines the restart, so it will be found that it will often automatically shut down and restart. You can try to upgrade the software again.

First of all, it may be because of a system problem, it is recommended to reinstall the system by softboxing. If it doesn't work, it's a CPU problem, but it's not necessarily that the CPU is broken, it may be because the CPU soldering is not reliable, just go to the maintenance point to re-solder, and then it's a CPU breakdown, about 200 for a change.

Automatic shutdown is a common problem for the entire Dopod family. The instability of the mobile phone system can be a real challenge for you. How can you become a master without exercising? Playing with a smartphone is to have the spirit of tossing, it is recommended to restore the factory settings of the phone.

Are you sure it's not that the battery is in bad contact? You can scrape the contact between the battery and the mobile phone with a knife to remove the oxide layer.

It's still a problem with the software, you need to flash the machine to find the right package for you, but you must unlock it before brushing.

1. The battery is loose.

2. System problems, it is recommended to unlock the flashing machine (20761 pure version is good).

The battery is not working, and the colder the day, the worse the battery is. Let's change the battery.

Look down on everything, look at it openly, see it through, don't care, don't care, it doesn't matter what is right and wrong. Whatever you lose, don't lose your good mood. Grasp your own heart and let your mind be pure, white, and quiet.

Letting go is not the same as giving up, and persistence is not the same as persevering.

1..Check whether your card capacity matches the S1 phone, this kind of problem may occur if the capacity is too large;

2.Go to a colleague or friend to borrow a card (if it is a new mobile phone, you can borrow one from the store you bought) the same type of card to try whether it can be used, mainly to check whether the slot of your mobile phone is in good condition, if other cards can be used, it means that your mobile phone card slot is fine.

3.You can also try to put your card on another phone (the phone that matches your card) to check if your card is OK.

4.If you try all the above 3 suggestions and don't find the problem, it is recommended that you go to the physical store to buy another one, and install the OK card on the spot.

Hope it helps!