What is the size of the wall tile

The mainstream classification of ceramic tiles can be divided into two categories: wall tiles and floor tiles. Wall tiles can be divided into two categories: exterior wall tiles and interior wall tiles.

The exterior wall specification is 25mm (mm *195 and so on will be omitted in the future.)

Interior wall tiles are generally *400 and so on.

Floor tiles are generally *1000 etc.

The above are the most common mainstream specifications, of course, there are some manufacturers that produce other specifications, but the non-mainstream ** is more expensive, and the number of people who use it is also limited. Lightning refreshes can solve wall problems.

The tile size specification table is divided into three categories according to the use of space:

1. Exterior wall tiles: 100x100, 150x150, 50x100, 50x150, 200x200, 200x300, 300x300.

2. Interior wall tiles: 100x100, 100x200, 100x250, 150x250, 200x300, 250x300, 250x400, 300x450, (large-scale interior wall tiles have been used more recently.) ）300x600，400x800。

3. Floor tiles: 300x300, 300x600, 330x330, 333x333, 400x400, 400x800, 450x450, 450x900, 500x500, 600x600, 600x900, 800x800, 1000x1000, 1200x1200.

Ceramic tile is a kind of acid-alkali resistant porcelain or stone, building or decorative material formed by grinding, mixing, pressing, glazing and sintering of refractory metal oxides and semi-metal oxides.

Its raw materials are mostly made of clay, quartz sand, compressed after high temperature, etc., and have high hardness.

The common specifications of full-body bricks are 300x300mm, 300x600mm, 400x400mm, 500x500mm, 600x600mm, and 800x800mm.

1. Bathroom floor tiles.

There are three common specifications of bathroom floor tiles: 300 400mm, 300 300mm, and 250 330mm; The specifications of bathroom wall tiles are 200x300mm, 250x330mm, 300x450mm, and 300x600mm. The selection method of specifications is also based on the actual area. Small-area bathrooms are dominated by small-sized tiles, and large-area bathrooms are dominated by medium-to-large tiles.

2. Floor tiles in the living room.

Living room floor tiles have 400mm, 600mm, 800mm, 1000mm more than one size, small area of the room to choose large specifications of the tile needs to be cut, which will cause a lot of waste, so this situation to choose a smaller size of the tile is more appropriate, large area of the room is the choice of medium to large specifications.

Specifications of common tiles.

1. Common specifications of glazed tiles: 152 152mm (square meters), 200 200mm (25 square meters), 200 300mm (square meters), etc.;

2. Common specifications of full-body bricks: 300 300mm (square meters), 400 400mm (square meters), 600 600mm (square meters), 800 800mm (square meters), etc.;

3. Common specifications of polished tiles: 400 400mm (square meters), 600 600mm (square meters), 800 800mm (square meters), 1000 1000mm (1 square meter), etc.;

4. Common specifications of vitrified bricks: 400 400mm (square meters), 300 600mm (square meters), 600 600mm (square meters), 800 800mm (square meters), 1000 1000mm (1 square meter), etc.;

5. Common specifications of microcrystalline stone: 800 800mm (square meters), 1000 1000mm (1 square meter), etc.

Tile characteristics: 1. Size: The size of the product is the same, which can save construction time and be neat and beautiful.

2. Water absorption: the lower the water absorption, the better the degree of vitrification, the better the physical and chemical properties of the product, and the less likely it is to crack or peel due to thermal expansion and contraction due to climate change.

3. Flatness: The tile with good flatness has no bending, no warping angle, easy construction, and flat ground after construction. Strength: high flexural strength, good wear resistance and heavy pressure resistance, not easy to wear, long-lasting, suitable for use in public places.

4. Color difference: lay the tiles flat on the floor, arrange them into a square meter, and whether there is a different color shade or can not be connected from three meters, resulting in aesthetic obstacles.

Chuangrui assistant.

First, the specifications of common tiles.

1. Common specifications of glazed tiles: 152 152mm (square meters), 200 200mm (25 square meters), 200 300mm (square meters), etc.;

2. Common specifications of full-body bricks: 300 300mm (square meters), 400 400mm (square meters), 600 600mm (square meters), 800 800mm (square meters), etc.;

3. Common specifications of polished tiles: 400 400mm (square meters), 600 600mm (square meters), 800 800mm (square meters), 1000 1000mm (1 square meter), etc.;

4. Common specifications of vitrified bricks: 400 400mm (square meters), 300 600mm (square meters), 600 600mm (square meters), 800 800mm (square meters), 1000 1000mm (1 square meter), etc.;

5. Common specifications of microcrystalline stone: 800 800mm (square meters), 1000 1000mm (1 square meter), etc.

6. Common specifications of antique bricks: 150 150mm (square meters), 300 300mm (square meters), 600 600mm (square meters), 300 600mm (square meters), etc.;

Second, the amount of ceramic tiles to calculate the method.

1. Calculate the number of tiles according to the area.

1) First of all, measure the size of the ground wall of the paving space, and calculate the area (length and width).

If you need to order tiles, first choose the tiles in the store, then measure the size of the home, and calculate the amount of various bricks according to the selected tile size before buying.

Size measurement: kitchen and bathroom (length, width, height and door and window width, height size), other places that do not need to be tiled only need to measure the length and width (such as bedroom and living room).

Note: When measuring the height of the kitchen bathroom, only the distance between the lowest position of the upper sewer pipe and the ground needs to be measured).

2) Calculation formula.

Total number of tiles = tile paving area (square meters) (length of a single tile and width of a single tile).

For example, how many bricks should be bought for 20 square meters and 300 300mm tiles?

Total number of pieces = 20m2 (pieces).

Note: When calculating the number of pieces, the unit should be unified, and if there is a decimal number after calculation, it is generally calculated by the method of 'rounding up', that is, 223 pieces, and the construction loss must be added (generally 6%-8%) before purchasing;

2. Calculate the number of pieces of foot line, edge line and waist line according to length.

First, measure the total length of the footline, edge, and waist line;

Calculation formula: Total number of pieces = Total length value The length value of the single piece baseline, edge line, and waist line.

For example, if the length of the waist line is 15m, choose a waist line of 600mm and 100mm. Total number of pieces = 15 pieces. If there is a decimal point after calculation, it is generally calculated by rounding up. Plus a few pieces of construction loss can be purchased.

There are many specifications and sizes of ceramic tiles, and the following introduces the general specifications and sizes of several common tiles, hoping to help you have a basic understanding of the size and specifications of tiles.

Common specifications for glazed tiles.

152×152mm、200×200mm、200×300mm

Common specifications for full-body bricks.

300×300mm、400×400mm、600×600mm、800×800mm

Common specifications for polished tiles.

400×400mm、600×600mm、800×800mm、1000×1000m

Common specifications of vitrified bricks.

400×400mm、300×600mm、600×600mm、800×800mm、1000×1000mm

Common specifications of antique bricks.

150×150mm、300×300mm、600×600mm、300×600mm

Living room and bedroom space: The living room and bedroom are generally the largest space in the whole set of living room, you need to pay attention to the sense of light and space, and use more ceramic plates of 900 900mm, 600 1200, or larger sizes such as 900 1800mm. For example, Mona Lisa tile 1200 2400mm ceramic slabs can meet the needs of large space, and there are few gaps between the upper and lower walls, showing the atmosphere and extending the sense of space.

2. Kitchen space: It is recommended to use 300 300mm wear-resistant small kitchen floors!

Kitchen tile size: The choice of kitchen floor tile size above we should take a specific look at the layout of the kitchen, if we want to decorate the kitchen into an open kitchen, we can choose a larger size of the floor tile, such as 600 600mm specifications or even 800 800mm floor tiles are OK, but if the kitchen area is small, then the size of the kitchen floor tile is recommended to use 300 300mm, small kitchen should not use too large size of floor tiles, Otherwise, the overall impact on the kitchen is poor.

2. The size of the floor tiles in the living room: First of all, we have to determine whether we choose antique bricks or vitrified tiles. If you choose antique bricks, you don't need to consider using 600 600mm, 600 600mm paved out beautifully, and antique bricks 800 800mm are also very few, if you use vitrified bricks, it is recommended to use 600 600mm!

With 800 800mm, it can only be paved with four and a half pieces. The determination of the size of the floor tiles in the living room has an important impact on our purchase of tiles, which can help us to do a good job in the overall style of the living room.

3. Balcony floor tile size: balcony as a space that is connected with the outside world, we are more important when buying floor tiles, it is recommended that you choose smaller specifications of floor tiles when buying balcony floor tiles, the general recommendation is 300 300mm, the size of balcony floor tiles should not be too large, the area of the balcony is not large, so we should try to choose small size floor tiles to decorate the balcony.

Wall tiles can be divided into exterior walls and interior walls, and the exterior wall sizes are 25mm*25mm, 45mm*45mm, 45mm*95mm, 45mm*145mm, 45mm*195mm, 73mm*73mm, 60mm*240mm, 95mm*95mm, 100mm*100mm, 100mm*200mm, etc. The interior wall size is 200mm*300mm, 250mm*330mm, 250mm*400mm, etc.

Wall tiles are suitable for façade decoration of toilets, kitchens, and outdoor balconies. Wall tiles are an effective way to protect walls from water splashes. They are not only used on walls, but also on the edge decoration of doors and windows.

It is also an interesting decorative element. It is used for decorative wall tiles at the baseboard, which is both beautiful and protects the wall base from being stained by shoes or tables, chairs and stools.

As a kind of ceramic tile, exterior wall tiles have super functions. It does not absorb dirt, does not deteriorate after long-term use, and also has a strong resistance to acid rain. Compared with other exterior wall materials, exterior wall bricks are themselves more resistant to fouling.

The water absorption rate of interior wall tiles is relatively high, and the color difference will be eliminated after water absorption, and under normal circumstances, the color difference will be eliminated after the wall is dry. Exterior wall tiles are tested for acid and alkali resistance, immersed in 10% acid, alkali solution does not change color, can be factory, generally add bleach in the swimming pool, its acidity and alkalinity is very low, will not corrode the tile.

The size of the wall tiles should be determined according to the area and area used, for example, the living room area is less than 30 square meters and 60 60 cm is used, and the grinding bridge rock is 80 80 cm above 30 square meters. 30 30 cm non-slip bricks are used in the kitchen and bathroom, but the size of these two areas is more 20 30 cm, 25 33 cm, 30 45 cm, 30 60 cm and other non-slip bricks. Large-size wall tiles are easy to pave and have better flatness, while small-size wall tiles have a good decorative effect and have a sense of space in large bathrooms.

What are the precautions for wall tiles when laying:

1. Before laying wall tiles, be sure to clean the wall and keep it dry and tidy, if there is latex paint or plaster on the wall, clean it first. Otherwise, the cement mortar laid in the later stage cannot be firmly attached to the wall, and even will fall off.

2. If there are cracks in the wall, it needs to be treated first, and then the wall tiles are laid. If the wall tiles are laid without treatment, it will cause the wall to be hollow and cracked, so when dealing with the wall, it must be treated in place, and it is also necessary to level it.

3. When paving, it is necessary to pave from the inside to the outside, and also determine the location of the lower drainage, find the corresponding slope, and then pave the wall bricks from the bottom to the top.

4. When laying wall tiles, the wall tiles should be soaked for about half an hour, and they can be used after the wall tiles do not blister. Because of the different brands of wall tiles, its water absorption rate is also different, so it must be soaked according to the performance of different tiles, if its tile water absorption rate is high, its soaking time should be extended.