Is pilling of sweaters poor quality? Do sweaters pill

Brother T will take you to solve the problem easily

No, there are many types of pilling.

1. The texture contains more acrylic, which will be easy to pilling.

2. If there is a lot of wool content, improper washing, or serious friction, it will also be easy to pilling.

If the texture is not good, pilling is not possible, because it is the fabric, if it is a sweater with high wool content, one is to pay attention to the washing method, and the other is to pay attention to maintenance.

Yes, pilling of sweaters has nothing to do with quality, and in a way, pilling is the twin of a whole wool product.

Two ways to minimize the prevention of pilling.

1. When washing, turn the sweater inside and out to reduce the friction on the surface of the sweater and prevent the sweater from pilling.

2. Wash the sweater with shampoo to make the sweater soft and natural.

It's not a quality problem, sweaters, small hairs must be easy to get entangled into balls after a long time, and clothes such as plush are like this, if it is artificial fibers such as polyester, it will not ball. Some of the balls on the Internet are not of good quality, and they add some pure of this and that material. You can go and buy a hair remover, which is not expensive.

The sweater is bad, more or less in the process of wearing and washing, there will be a lot of friction, it will be a little fluffy, and the sweater with a delicate and soft texture will pill less.

The sweater is generally a little fluffy with hair, depending on how much it contains hair, the percentage is crossed, and the chance of getting up will be greater, but the acrylic is not very pilling.

Pilling of sweaters is not a quality issue.

Not necessarily.

The higher the quality of the wool raw material, the better the fineness, the denser the surface scales, the good curl, and the soft feel, but it is also easy to entangle and pill.

The knitting method of the sweater is different (flat needle, ingot, double ingot, etc.), and the density is different (loose, tight) will also produce different degrees of pilling.

Optional use

Pick common sense. 1. Many sweaters are made of chemical fiber, so it is best to smell it with your nose when you buy, and you can buy it if there is no peculiar smell, otherwise it will hurt you.

2. The elasticity of the sweater is very important, when buying, pull the surface of the sweater, check it to see how the elasticity is, the sweater with poor elasticity is easy to deform after washing.

3. Be sure to open the inside of the sweater to look at the washing instructions, and ask the shopping guide whether they need to be dry cleaned, whether they can be exposed to the sun, etc., so as to make it easier to take care of them in the future.

4. Check all the yarn joints on the surface of the sweater to see if they are smooth, whether the knitting pattern is consistent, and whether the color of the yarn is symmetrical.

Sweaters don't always pill.

Pilling is a characteristic of any kind of man-made fiber. Yarns containing man-made fibers such as chemical fibers, nylon or Baoli velvet will pill. Natural fibers, such as cotton, twine, or wool, can also sometimes pill after a period of wear.

However, the difference between man-made fibers and natural fibers is that natural fibers can be pilled by the correct cleaning method after pilling.

Generally speaking, the wool of pure wool is not easy to pilling, and a few will pill once, and it will not pill again after being cut with tools such as hairball trimmers. Compared to sweaters made of cotton, sweaters made of wool are warmer and less prone to deformation and fading.

What to do if the sweater pills

1. Use a razor to gently scrape the balls on the sweater, and the surface of the sweater will be smooth after a while.

2. Use a hairball trimmer to trim the balls on the sweater, in order to protect the texture, place the sweater on a flat surface, and stretch the wrinkles before operation.

3. I think everyone has had the experience of sticking typos with tape. By the way, you can also use transparent adhesive here, and it is the kind of wide adhesive that is good. Stick the hairballs on your clothes with tape, but this is not recommended because it can damage your clothes.

It's not because of the poor quality, it's because of the material, the wool won't pill, and the friction is reduced.

Popular science, why does the sweater pill, many people don't understand what the reason is, and some people even think that as long as the pilling is a quality problem, in fact, this is a prejudice. In the process of using various fiber garments,Pilling and pilling occur on the surface of the garment due to various external frictions. This phenomenon is inevitable in both natural and synthetic fabricsIt is still a technical problem that needs to be solved urgently in China.

There are many factors that contribute to pilling of sweaters.

One. Raw material factors:The saturation force of plush yarn is small, and the force friction will separate the wool fiber from the main yarn and form hairiness, which is the phenomenon of sweater pilling

Wool fibers are long and stiff. Feathers are not easy to break and fall off after they are formed. It will continue to spin, getting longer and longer.

Under the action of friction, it turns into a small hairball. The higher the quality of the wool material, the better the fineness, the denser the scales on the surface, the better the curl, and the softer the feel, but it is easy to wrap and pick up. Second, different fabric structures (flat needles, ingots, double ingots, etc.) and different densities (loose and tight) will produce different degrees of pilling.

The State Bureau of Technical Supervision will weave the pilling test of different yarn specifications (thread count) to the specified specification density. Specimens of tissue structure are placed in pilling boxes for a specified period of time and then graded.

Three. When paired with different objects (smooth and rough), there will be different degrees of pilling. Sleeves, pockets, and other parts are often rubbed and are prone to pilling.

Four. From the point of view of craftsmanship: if the twist is loose, the yarn is round and fat, the sliver is plump, but it is easy to pill, on the contrary, if the twist is tight, the style of the yarn will disappear like a rope.

The easiest way to do this is to wear a coat over itto reduce friction between the sweater and the outside world. If you must wear a sweater outside, you should choose the one with a thicker yarn and a large yarn gap, so that once the friction produces fluff, the hairiness on the surface of the yarn will fill the gap in the clothes and avoid further expansion of hairiness.

Many people will encounter this situation, for example, when they buy a sweater, the store says that it is pure cashmere, and it will not pill but it will still pill after wearing it for a few days, so they will question whether the dress is fake.

However, no matter how good the sweater is, it will pill, and the children's shoes that can't say the ball are actually the point of view caused by the ignorance of cashmere products, and the important reason is that in the past very bad time, some big brands were fooled, thinking that good materials would not pill.

Let's talk about the various reasons why sweaters pill, as follows:

1.Direct cause: friction, the most normal friction, multiple hair fibers are stirred together, imagine the situation of hair knots:

Because of friction, static electricity, etc., the hair crossed, and then it became knotted; For another example, I believe that many people have played with yarn balls when they were children, and then somehow they tm knotted!

1) Because in the process of friction, these fibers are disconnected by the distance of the knot position, and the distance is broken due to excessive stretching;

2) There are a few broken fibers hanging from the knot, which continue to provoke other fibers, and continue to rub, and finally accumulate into a ball;

Normal people are always moving, even if they raise their arms, their clothes will move with them, these movements are very small and insignificant for us, but for the fineness of the fiber, the force per unit area is still very large. In addition, multiple layers of clothing will rub against each other, and the fibers will be mixed together a lot more than we think.

It is also an accidental phenomenon that the fibers are mixed together, and sometimes the fibers intersect, but the next friction direction is just right to avoid the event of mixing together.

But a small probability event will definitely happen, and the usual number of frictions is innumerable, after all, such a large base is there.

2.Static electricity: When wearing a sweater, the most important thing is in autumn and winter, the weather is dry, because it is easy to produce static electricity, it is naturally easy to attract each other, and after the fibers intersect, it becomes more difficult to recover, so static electricity greatly increases the possibility of mixing together.

3.The human factor.

2) Regular maintenance can reduce the occurrence of pilling to a certain extent. Freshly produced sweaters, manufacturers will soak them in softener and then wash them to get a better feel.

The links in the factory are more professional, these can be said to be the first maintenance, but after the guests buy home, the maintenance is different, some people wear a winter, spring washing; Some people wash it directly in the washing machine; Some people buy cashmere sweater detergent hand washed. The frequency is also different, and if you haven't cleaned it regularly for a long time, it will definitely pill.

The above suggestions are only personal suggestions, don't blame you for being right or wrong, thank you!

In the process of wool yarn processing and sweater wearing, by the friction, tension and other external forces, wool fibers in the wool yarn are easy to hook out to form a ring or single-head detachment, after repeated friction, the wool fibers are entangled together to form a ball, the size of the balling mainly depends on:

1.Materials used in the product.

Low-grade raw materials, short length, uneven fineness, high short hair rate, national hair, low branch hair and other raw materials belong to this list.

2.Spinning process control.

The spinning method, fiber properties and the twist of the yarn determine how much the fiber stretches out of the yarn surface.

3.Fabric construction.

Sweater products are knitted fabrics, and the density of the fabric and the tightness of the coil structure also have an impact on the pilling of the sweater, and the surface of the relatively smooth fabric, such as jersey fabrics, ribbed fabrics, has stronger anti-pilling performance than the uneven surface fabric structure such as fat flower fabric and strip fabric.

4.Washing mode and wearing.

The washing method of sweaters is sometimes an important reason for fluffing and pilling, and the products that are not marked "machine washable" must be washed in the way of "careful hand washing". In general, the elbow and rib friction pilling is more significant.

From a certain point of view, pilling is the "twin" of the whole wool products, in order to reduce pilling, in addition to strict control of materials, our factory also adopts our own spinning production process, in the product weaving and post-finishing process to form their own unique production process, so that Vierma products rarely have pilling phenomenon.

Pilling is a common feature of velvet products. In the process of wearing and using the velvet fabric, the short fibers that highlight the surface of the fabric are easy to be entangled into balls, which affects the appearance and causes felt, especially the high-end products have the demand for close-fitting, soft and smooth, which will increase this trend, and the pilling is related to the performance of raw materials, spinning and dyeing and finishing processes, weaving structure, and wearing methods. The influence of raw materials, spinning and dyeing on pilling is very complex, and its mechanism is still in the first place, and the excessive pursuit of anti-pilling.

It has a negative impact on the style and quality of woolen products, so experts recommend consumers:

1. When using fine wool wool yarn (cashmere type), mercerized velvet thread and Tencel series velvet yarn to weave, the braiding density should be appropriately increased, and the weaving pattern structure should be reduced.

2. When wearing, the sweater should be smooth inside and outside.

3. Disassemble and wash frequently, generally re-knit once every 2-3 years, use neutral detergent or soap powder when washing, and the water temperature is below 50, do not rub and dry.

4. If there is a special need for anti-pilling, it is recommended to buy pure plush yarn spun from blended and coarse wool.

In fact, any pure natural wool and cashmere fabric will pill, in the sweater processing process and sweater wearing process, by friction, tension and other external forces, the wool fibers in the sweater are easy to hook out to form a ring or a single head detachment, after repeated friction, the wool fibers are tangled together to form a ball.

Is the pilling of the sweater a bad quality?Pilling of sweaters doesn't have to be of bad quality.

In particular, high-end sweaters have a close-fitting, soft and slippery demand, which will increase the trend of pilling, pilling is related to the performance of raw materials, spinning and dyeing and finishing processes, weaving structure, and wearing methods, so it is recommended to wear sweaters when wearing the inner and outer clothing should be smooth, wash with neutral detergent or soap powder, water temperature below 50, do not rub, spread out to dry.