How to change geothermal energy to water and electricity, if you want to change to geothermal, can h

Let me tell you in detail in the vernacular, first of all, the premise of your question is (1) do not hang the shed (2) do not want to go to the ground, because the geothermal heat is afraid of leaking the pipe (3) the way of the wire (4) the way of the waterway Because I am the construction supervisor in the north, our operation method is as follows: (1) First of all, the way of walking the wires without hanging sheds: because the light positions in the living room, bedroom and dining room are all taken in and basically will not move, so there is no need to planing ditches under normal circumstances, and the bathroom, kitchen and balcony must hang PVC or aluminum gussetIf the switch itself is two controls want to add another control can add another live wire in the original line pipe, and there is no need to planing the ditch, (if the landlord does not understand too much, the electrician you invite he understands) so that the wire on the shed surface is solved, of course, I am not absolute, sometimes according to the actual situation also need to plane the ditch (2) The following is the way to go for the geothermal wire:

Because the ground is generally the socket line or ** line and TV line in various positions, so if the wall is very busy, generally go to the ground, then you will ask why go to the ground, geothermal water pipes, in case the pipe leaks, the loss will be greater, don't be afraid, because the geothermal coil is regulated, generally at least 200mm away from the wall, and the force is not with an iron skewer planer but with an iron hammer to slowly shake, so that the geothermal pipe is safe, so the work done by the electrician is also regulated, (3) and then for the geothermal hot and cold water pipes: under normal circumstances, the rough house developer will leave a reserved ditch, but there are also not left, which is the same as the way of the wire, but there are also a lot of walls, but if you go to the wall, you must use paper tape to glue the water pipe, or you will be injured when you install the sanitary ware, and then hurt the water pipe, so that the busyness will be big That's all for the time being, if there is something you don't understand, ask me again.

If you don't go to the ground, you can't go to the top, you can only walk the wall.

If the home wants to change to geothermal,It is not recommended to walk on the ground for water and electricity, which is not safe and is not conducive to maintenance. Hydropower should go to the top and go to the wall.

It is better not to go to the ground for water and electricity, and it is not safe to <>

Some people want to change to geothermal, because geothermal heating is better, but when changing to geothermal, some people want to save trouble and want to put hydropower on top of geothermal heat. This is not feasible, because my house was also changed to geothermal before, and I also had this idea at that time, but the electrician rejected it, saying that it was very unsafe for the wires to go to the ground. To do home wiring to take into account safety, the electrician's statement is very correct, once the wire leakage, the consequences are unimaginable.

Water and electricity cannot be taken to the ground, because it is not conducive to the maintenance of <>

Many people want to save trouble when decorating, and want to take the water and electricity to the ground, although it looks very beautiful, but if it fails, it will be repaired, which will bring a lot of trouble. Therefore, the master electrician will advise not to go underground, and the wires should go to the top. The neighbor's house just took the water pipe to the ground, and as a result, the water pipe leaked, resulting in the whole downstairs flushing, which is a very dangerous thing, which will affect others, and at the same time, it will also harm yourself and suffer economic losses.

Decoration can not only look at the immediate interests, can not think of long-term interests, anything is not once and for all, once the failure, it needs to be repaired, if the hydropower to the ground, the project will be very large, the economic loss will be greater, and will bring potential safety hazards.

If you want to change to geothermal electricity, you can go to the top <>

The safety of hydropower roofing can be guaranteed, and it is also conducive to maintenance, which can save the cost of laying geothermal energy. Many experienced maintenance masters will advise us to start from a safety point of view, from a maintenance point of view, even if it costs some pipes and wires, it is worth it, because safety is no small matter. If the hydropower is topped, there are also corresponding benefits, when laying the ground, the ground will not be leveled twice, which will save time, trouble and materials.

ConclusionTo change to geothermal, it is necessary to find a professional master for construction, and at the same time to buy geothermal pipelines produced by regular manufacturers, and the quality will be guaranteed. After the project is completed, a contract should be signed with the master who does geothermal heating, so that he can guarantee the quality, and make an underwriting, whether it is guaranteed for one year, two years, or three years, depending on how everyone talks.

Nowadays people have a lot of new ideas when decorating, for example, when installing heating, some people like to use water heating, while some people prefer to use floor heating. But when it comes to underfloor heating, people will take into account water and electricity. After all, most hydropower is on the ground, and if hydropower goes to the ceiling, then it doesn't affect the floor heating.

However, if you want water and electricity to go to the ground and do floor heating at the same time, it is actually possible, but you need to pay more attention to it during construction.

First of all, if the ground line is arranged on the ground, it needs to be grooved in advance, or it should not be raised in the middle along the wall. After the water and electricity are completed, the area where the underfloor heating needs to be laid will be cleaned in advance. Make sure the floor is flat and clean, so that the floor heating pipes will not be scratched by small stones on the ground.

Secondly, the construction personnel must not knock nails on the floor heating pipes during construction. Prevent nails from puncturing the floor heating pipes, so that it will be very troublesome to deal with them later. Use a professional clamp to connect the heating tube or use a ferrule connection.

At the end of our heating pipes, we need to set up a heat insulation sleeve to prevent the temperature of the local ground from being too high.

Then the insulation is laid on the ground that we have leveled. When laying, it is necessary to pay attention to the fact that it must be flat and tightly lapped, except for the plastic nails that fix the heating pipes. There can be no other damage.

It should be noted that because of our underfloor heating, many people will choose to lay tiles, so that they can provide better and faster heating results. However, laying tiles requires at least 5 cm thick cement mortar cushion, so if it is laid in this way, the floor height will be affected.

Although it is said that hydropower can be convenient for construction, the cost is less. But once repairs are needed, it is very inconvenient to replace the pipeline line, and even the ground needs to be removed. And if we use water and electricity to go to the top, then the inspection and maintenance are more convenient, plus the pipe can be hidden in the ceiling, so at a glance it is also very beautiful, the only disadvantage is that it takes more time, money and material resources, and it needs to be slotted on the wall, so the damage to the wall is more serious.

Therefore, whether the floor heating is sold at the top or on the ground, it is no problem, and you can determine whether you want to go low according to your own needs.

I think that if we want to switch to geothermal energy, we can go to the ground, but we have to do this together with a professional staff.

It is possible to go to the ground, but the circuit must be hidden, otherwise there will be a short circuit, or the phenomenon of connecting electricity.

Yes, but it may have some impact and is not particularly safe.

Summary. Hello, dear, as long as the inlet and outlet pipes of the electric water heater are connected to the floor heating and water collector. <>

Hello, dear, as long as the inlet and outlet pipes of the electric water heater are connected to the floor heating and water collector. <>

Dear, water floor heating to electric heating first of all, we should transform the water and electricity heating pipes into electric floor heating pipes, and then we can connect the power cord of the floor heating to the switch of electric floor heating, and turn on the power switch to use it normally, but there are still many factors to consider, so the transformation plan is also different, and the transformation cost is not the same. <>

Dear, water and electricity heating is water and floor heating, electric heating, heating pipelines, among which the warm ground brought by the water and mountain heating system can destroy the living environment of mites and other parasites, prevent the production of mold, and can effectively promote foot blood circulation, thereby improving the blood circulation of the whole body, promoting metabolism in the new city, and has an inhibitory effect on cardiovascular diseases, especially for the elderly and children, and has more prevention and treatment effects for patients with arthritis and cold legs. <>

Summary. Hello dear. As long as the inlet and outlet pipes of the electric water heater are connected to the floor heating and water collector.

Hello dear. As long as the inlet and outlet pipes of the electric water heater are connected to the floor heating and water collector.

How much does a water floor heating switch to electric heating heating pump?

Water floor heating to electric heating first we should transform the water and electricity heating pipes into electric floor heating pipes, and then we can guess that the slag will change the power cord of the ground heating to the switch of the electric floor heating, turn on the power supply and turn on the nuclear trillion to use it normally, but there are still many factors to consider, so the transformation plan is also different, and the transformation cost is not the same.

Can I adjust the temperature myself?

Hello dear. After inquiry** between 70 and 3000 yuan, there is a temperature control valve that can be adjusted by itself.

Ground Yu pure surface radiant heating is also commonly said floor heating, in layman's terms, ground radiant heating is the official name of the servant, and floor heating is its abbreviation. Electric floor heating: It is a heating method that heats the entire ground with hot water or heating electric old volt cable with a temperature of no higher than 60 degrees Celsius, and a coil or heating cable buried under the concrete, and evenly radiates heat dissipation to the room through the ground.

1. Electric geothermal has no radiation hazards. 2. Water and floor heating are not dry, and the temperature of the two is the same. 3. The use of natural gas floor heating is cheap.

Abstract: If you want to change the heating of water heating to electric water heating in your own home, you only need to connect the inlet and outlet pipes of the electric water heater to the floor heating and water collector.

It is connected to the interface of the two valves in the figure below.

Note: 1. Add a circulating water pump between the electric water heater and the water collector. 2. The circulating water pump should have a temperature controller.

How to change water floor heating to electric heating.

If you want to change the heating of collective heating to electric boiling water heating in your own home, you only need to connect the inlet and outlet pipes of the electric water heater to the floor heating and water collector. It is connected to the interface of the two valves in the figure below. Note:

1. Add a circulating water pump between the electric water heater and the water collector. 2. The circulating water pump should have a temperature controller.

If you want to change your 100 flat water floor heating to fire, is it okay to use electricity for dual purposes? How much does it cost?

This depends on your local fees.

How much does the retrofit cost?

That's a few thousand dollars according to us.

Is it OK to add electric heating to a heating boiler? Can it be used for both thermal and electric purposes? OK.

Dear, Rubber Mess, I'm glad to answer for you, how to change water floor heating to electric heating Answer: If your home meets the following two conditions, you can start this program, which is relatively low cost and labor-saving. The height of the floor in the room is enough to be more than meters) there is a height of 2-3cm under the entrance door, if the above two conditions are met, then the floor tiles can not be removed, and carbon crystal floor heating can be directly laid on it.

The specific process is: laying carbon crystal floor heating accessories moisture-proof cloth; Laying a special reflective layer for carbon crystal floor heating; The thickness of the layer is between 10 and 2C, which is determined according to the height of the room and the door frame; Lay the carbon crystal heating plate, wiring it, and install the mixer (this needs to be grooved in the wall); Laying carbon crystal floor heating protective layer; The floor can be laid on top, which saves the cost of folding bricks. If the height is not enough, and the lower part of the door frame is not enough 3cm, this is two more processes than just now, and the cost will increase accordingly.

Demolition of bricks, this is between 30-50 yuan per square meter; Ground cement leveling; Others can be followed by the construction steps of the first plan. If the home is equipped with a floor, you can modify the carbon crystal floor heating with 2cm under the door frame. If the composite floor is installed at home, the cost of transforming carbon crystal floor heating is the lowest, and there is no need to buy floor tiles or floors, and there is no need to remove bricks, which is the most energy-saving cost.

Find the workers of the construction of the floor beam baffle to fold the floor, and after the demolition is completed, the construction will be carried out in accordance with the carbon crystal floor heating construction process, and the floor construction workers will be paved again after the construction is completed.

When deciding whether to switch to hydro or underfloor heating first, here are five key points and summaries to help you decide:

1.Safety and Urgency: If your hydropower system has serious safety hazards, such as aging, short circuits, or leakage, prioritize improving your hydropower system. This is because security issues need to be addressed immediately to protect your family and property.

2.Architectural planning and engineering sequence: When considering plumbing, water, and underfloor heating retrofits, it is important to understand the architectural planning and engineering sequence.

Often, hydropower renovations need to be completed before other renovation works begin, as plumbing and wiring need to be embedded in walls or floors. The underfloor heating system can be installed after the hydroelectric renovation has been completed.

3.Budget and funding arrangements: Assessing your budget and funding situation is also a key factor in decision-making.

If you're on a budget and your hydropower system needs urgent repairs or updates, prioritize improving your plumbing. An underfloor heating system may be an additional comfort feature that can be reinstalled when economic conditions allow.

4.Seasonal and climatic conditions: Considering the seasonal and climatic conditions in your area is also an important factor.

If you're in the middle of a cold season and underfloor heating can provide you with a more comfortable living environment, you may want to prioritize installing an underfloor heating system. However, if you have serious problems with your hydropower system that affect daily life and water needs, then improving your hydropower may be even more urgent.

5.Personal preferences and needs: Finally, it's important to make decisions based on your personal preferences and needs.

If you are very concerned about the warmth and comfort of your living environment, the floor heating system can be your first choice. Conversely, if you are more concerned about the stability and efficiency of your hydropower system, or if you are facing an urgent safety concern, you may choose to improve your hydropower first.

In summary, switching to hydropower or underfloor heating first depends on safety and urgency, building planning and engineering sequence, budget and funding arrangements, seasonal and climatic conditions, and personal preferences and needs. Based on these factors, you can make decisions that are best for your situation.