How to solve the Nokia X6 black screen failure

Mobile phone black screen, splash screen, flower screen, white screen, recommended:

1.Click the back button to see if you can exit the software. If you can, exit and re-enter.

2.If you can't quit the software, it is recommended to restart the machine and try: press and hold the power button and the down volume button at the same time for more than 7 seconds to restart the device;

4.If it comes with system software, it is recommended to update the system version of the mobile phone to try: please go to Settings - About the phone (about the device) - Software update (system update) - Update (please back up the data in the device before upgrading).

If the problem persists, it is recommended to bring the purchase invoice, repair card and mobile phone to the local mobile phone purchase office for repair or spend money nearby to repair it.

It should be a software conflict,I've had it,The most common thing is to turn off the phone,The three button lights under the phone are still on,When the phone is turned on,The phone will vibrate,But the screen just doesn't light up,Repeatedly! When you unplug the battery and then go on, it's normal, it's completely a conflict of software, it is recommended to check the software, this is too difficult, it's not easy to find, you can install "Safety Steward" for software detection, check the score online, and view the comments. There's no way to only have a hard grid machine.,I'll take the grid machine to solve it.,Grid finish.,Less decoration software.,Decoration of your own commonly used.,Practical.,Popularity of the software can be.,Less miscellaneous.,Small.,Software that doesn't have any effect!

The following is the hard grid machine method: 1 hard grid machine, in the shutdown state at the same time press and hold the dial key (green key) hang key (red key) camera key do not let go, and then press the power button, the mobile phone vibrates and releases the boot button, pay attention to remember that the other 3 keys do not release, and can not be released halfway, until the screen of selecting the national language or modifying the date and time is released, prompt operation, enter the standby interface to complete the hard grid machine (note that it is recommended to back up data before the hard grid machine, and all data loss is lost, just like buying a new mobile phone)!! This method does not solve the problem, please see the next method.

2. Take flashing, the specific method is very complicated, please go to Saipan to inquire, there is a detailed method!! This method does not solve the problem, that is, the CPU I mentioned earlier is broken, please see the next article.

3. The final method, you can only take the invoice mobile phone to find customer service!

Hope it helps!

Summary. Dear, hello, I'm glad to answer for you, the black screen of the Eurasian Info X60 mobile phone after falling may be caused by the internal hardware damage of the phone. It is recommended that you follow the steps below:

1.Try restarting your phone. Sometimes some minor problems can be solved by restarting the phone, long press the phone power button to restart the phone, if the phone can be turned on and used normally, the problem may be temporary.

2.If the restart doesn't work, you can try using your phone's recovery mode. Press and hold your phone's power key and volume down key for a few seconds to enter recovery mode, and do things from recovery mode, such as clearing cache, etc.

3.If none of the above steps can be repaired, it is recommended that you go to a professional repair shop or a Eurasia after-sales point for repair or replacement parts. Please pay attention to protect your personal information and mobile phone data during the repair process, and beware of being infringed.

Dear, hello, I'm glad to answer for you, the black screen of the Eurasian Info X60 mobile phone after falling may be caused by the internal hardware damage of the phone. You should follow the steps below:1

Try restarting your phone. Sometimes some minor problems can be solved by restarting the phone, long press the phone power button to restart the phone, if the phone can be turned on and used normally, the problem may be temporary. 2.

If the restart doesn't work, you can try using your phone's recovery mode. Press and hold your phone's power button and volume down button for a few seconds to enter recovery mode, operate from recovery mode, and carry out operations such as clearing cache, etc. 3.

If the above steps cannot be repaired, it is recommended that you go to a professional repair shop or talk to a Chi Ou Yaxin after-sales point for repair or replacement parts. Please pay attention to protect your personal information and mobile phone data during the repair process, and beware of being infringed.

Can I fix it at home?

Yes, if you know how to fix it, you can.

Is the inner screen broken?

Yes. How much does it cost to repair it?

Are you there. I don't know how much it is, it should cost a few hundred dollars.

I went last time to change one and asked for 350 um.

Summary. Hello <>

If your EurasiaInfo X60 phone has a black screen, you can try to restart the phone first or turn on the phone again after charging to see if it can be used normally. If it still can't be used normally, it is generally the phone that has been seriously damaged, you can consider contacting the official customer service or going to a professional repair shop for repair and repair. Extended Supplements:

1.If you find that your phone frequently has a black screen problem, it is usually an abnormality in the system, you can try to do a system reset, and install system updates, clean cache, uninstall useless apps, etc., to see if you can solve the problem. 2.

In order to avoid problems such as a black screen on the phone, we can usually pay attention to protecting the phone, such as using a mobile phone case, installing a screen protector, avoiding falls, preventing water, and so on. At the same time, it is also necessary to use the mobile phone reasonably and avoid excessive use of the mobile phone, such as playing games for a long time, using the mobile phone to charge, etc., which will generally damage the mobile phone. <>

What should I do if the Eurasian Info X60 falls on a black screen.

What should I do if the Eurasian Info X60 falls on a black screen.

How to fix it yourself at home.

Hello <>

If your EurasiaInfo X60 phone has a black screen, you can try to restart the phone first or charge it and turn on the phone again to see if it can be used normally. If it is still used normally, the mobile phone is generally seriously damaged, you can consider contacting the official customer service or going to a professional repair shop for repair and repair. Extended Supplements:

1.If you find that your phone frequently has a black screen problem, it is usually an abnormality in the system, you can try to do a system reset, and install system updates, clean cache, uninstall useless apps, etc., to see if you can solve the problem. 2.

In order to avoid problems such as a black screen on the phone, we can usually pay attention to protecting the phone, such as using a mobile phone case, installing a screen protector, avoiding falls, preventing water, and so on. At the same time, it is also necessary to use the mobile phone reasonably and avoid excessive use of the mobile phone, such as playing games for a long time, using the mobile phone to charge, etc., which will generally damage the mobile phone. <>

How much does it cost to repair it?

Hello <>

Regarding the problem of Eurasia Info X60 drop black screen repair, I can directly you. Usually, repairing a black screen problem requires replacing or repairing important hardware such as a monitor or motherboard, and the specific cost also needs to be determined on a case-by-case basis. Some smaller problems usually cost only a few hundred dollars, while more serious problems can cost thousands of dollars.

It is recommended that you consult professional maintenance personnel before repairing, and ensure that the repair details are comprehensive.

Hello, the reason is here: the number of grinding is too much, the cable will peel off and lose the insulation layer, and the slide (the metal slide of all mobile phones are grounded) will be short-circuited, and the place where the cable is worn is just the data cable of the LCD, so it causes no display (black screen).

Solution: Find a very thin, soft and smooth tape, and stick a tape of the same size or better material along the curved side (i.e. the side with a gap) (the conditions are limited, what I can find is high temperature insulating tape). In this way, you can avoid the problem of black screen, I tried it and it can be solved, but how long it can be used depends on whether the material used is wear-resistant.

Notes:1The material should not be too large, otherwise there may be noise in the slideway or the tape will easily get stuck and fall off.

2.The screen has a card position, first remove the card slots on both sides below, and then pull it out to take it out.

3.If you feel the need to unload the cable, you must disassemble the earpiece first.

Or send the mobile phone for repair and change the cable.

Just because the surface isn't damaged doesn't mean it's not broken.

It is estimated that it is a motherboard problem, and if you fall this one, the circuit is not necessarily soldered, and if the warranty period has passed, take it to the mobile phone store to the maintenance master.

It doesn't cost much.

If you don't fix it, it won't get better on its own.