How to operate the electronic pricing scale, how to set the unit price and amount of the electronic

Electronic scales, how to use electronic pricing scales, it will be very simple at a glance.

Boot display zero, put the item, enter the item**· (now it's all kg, that is, kilogram, so**to enter the doubled) and then you can see the total ** of the item in the amount column

Install it, turn on the machine, and wait for the weight window to be zero, and you can use it.

The steps to set the unit price and amount on the scale are as follows:

1. First of all, it is necessary to open the electronic scale, and the dust switch is generally in the back or lower right corner, which is different for different models.

2. Then there is a row of unit price 1 below, unit price 2 all the way to unit price 8, press unit price 1.

3. Then press Save, and a small circle will appear in the unit price column.

4. Then press the unit price of your own product, pay attention to the fact that this is per kilogram, and if you want to sell a pound of money, you need to press twice the value of him.

5. Finally, put the product corresponding to the stuffy Zen, and the amount in the last column is to show how much the product can be worth.

The precautions for using electronic scales are as follows:

It is strictly forbidden to rain or rinse with water, if it is accidentally wet, wipe it with a dry cloth, and send it for repair as soon as possible when the machine is not functioning properly.

It is strictly forbidden to knock on and press hard.

Do not place in high temperature and humid environment (except for special waterproof and anti-corrosion scales). Do not allow cockroaches or small creatures to enter the machine to avoid damage.

If the electronic scale is not used for a long time, the machine must be wiped clean, put in the desiccant and wrapped in a plastic bag, and the dry battery should be taken out. When using rechargeable batteries, they should be charged every three months to ensure their longevity. Charging should not exceed 8 to 10 hours. <>

The tutorial for using the electronic scale is as follows:1. The electronic scale needs to be placed on a horizontal table.

2. Turn on the electronic scale, and then clear the reading of the electronic scale.

3. Enter the unit price of the commodity on the electronic scale, and place the commodity on the electronic scale to calculate the **.

4. Electronic appliances for weighing the weight of objects. It is composed of sensors, load-bearing loading and handling models and microcomputer chips.

When the load-bearing device is subjected to the gravitational force of the object, the sensor outputs an electrical signal proportional to the weight and transmits this signal to the computer system. A variety of data can be displayed and printed on request. High accuracy.

1. In the number setting area on the right side of the electronic scale, press and hold the decimal point button for a few seconds, and release it after "centr" appears.

2. Then press the "8" button, and 75000 will appear in the single column. You can ignore this step and press the "Accumulation" key to enter the next step.

<>4. This is when the weight value appears, this step is more important. Enter the weight of as many weights as you have in your hand, and remember to reserve the number of decimal places. For example, if I have a 5,000g weight, I have to enter 50,000 because there is a 0 for the decimal point.

If you only enter 5000, only 5000 will be displayed after the correction is completed, with no decimal point. After entering, press the "Accumulation" button to proceed to the next step.

5. At this time, the weight column of the electronic scale will appear: LCP, and the single weight column will appear: OFF.

<>8. Put the weight on it, and wait for a few seconds before the electronic scale will automatically calibrate. When the weight bar jumps to the weight weight, the correction is complete.

Hello, the debugging method of the electronic pricing scale is as follows:

1.Before commissioning, you must turn on the power switch to warm up for 15 minutes, and try to use a vehicle with a load capacity close to the maximum capacity, pass back and forth many times and brake on the load-bearing platform to stop, and tighten the high-strength bolts of each load cell with a torque wrench.

2.Use a digital voltmeter to measure the output voltage of each load cell in turn, and if there is any inconsistency, you can adjust the corresponding two precision adjustable resistors in the junction box to reduce the amount of difference between them.

3.However, it must be noted that the rotation direction of the two adjustable resistors should be the same, and the rotation amount should also be the same, and the resistance decreases when rotating clockwise, the output voltage becomes larger, and the display value increases, otherwise vice versa.

4.until the output of each load cell is consistent.

5.Debugging can generally be carried out by the gravimetric method, that is, the weight of 1 10 maximum weighing capacity is placed on the load-bearing platform center position and the load-bearing platform above each load cell in turn, and the difference of the output of each load cell is accurately measured by the real difference method, and the two precision adjustable electric cavity corresponding to the load-bearing key load cell are adjusted respectively at the same time, so as to reduce the difference between each other, but the direction of rotation and the amount of rotation are the same.

6.After the bearing point is debugged, the weight equivalent to the maximum weighing capacity is evenly added to the load-bearing table, and the display value is consistent with the weight value according to the position and method introduced in the manual of various weighing displays, and the weight is removed, and the empty scale is confirmed to be displayed as "0".

7.Finally, the maximum weighing capacity is divided into several parts, which must include the minimum weighing capacity, the maximum weighing capacity and each weighing point of the tolerance change, and the weighing error of each point is required not to be greater than the maximum tolerance requirement of each measurement point.

Wu defeated is the debugging method of electronic pricing scale, I hope it will be helpful to you.

The method of adjusting the unit price of the electronic pricing scale:

1. Start the electronic scale first;

2. Press the storage button;

3. The unit price in the middle of the display screen is displayed as half of the 8;

4. Press the number button to enter the unit price of the commodity;

5. Store this unit price in the price of a disrupted list to slowly change the file, such as pressing "Unit Price 1", this unit price will be stored in "Unit Price 1";

6. Restart the electronic scale and press a button to complete the input of the unit price.

Summary. How to set the unit price and amount: 1. First, in the setting interface of the electronic bang, find the "**Settings" option and click to enter; 2. In the ** setting interface, you can see the two options of "Unit Price" and "Amount", click "Unit Price", and enter the unit price you want to set; 3. Then, click "Amount" and enter the amount you want to set; 4. Finally, click the "OK" button to complete the setting of unit price and amount.

How to set the unit price and amount: 1. First of all, in the setting interface of the electronic bang, find the "**Setting" option and click to enter; 2. In the ** setting interface, you can see the two options of "Unit Price" and "Amount", click "Unit Price", and enter the unit price you want to set; 3. After the trip, click "Amount" and enter the amount you want to set; 4. Finally, click the "OK" button to complete the setting of the price and amount of single pruning.

I'm still a little confused, can you be more detailed?

How to set the unit price and amount: 1. First, in the setting interface of the electronic bang, find the setting options of "unit price" and "amount", and then enter the corresponding value; 2. Then, click the "OK" button to complete the setting of the unit price and the amount of good balance; 3. Finally, click the "Save" button to destroy it, and you can save the unit price and amount set by Yousold. Causes of the problem:

1. When the user sets the unit price and amount, there may be input errors; 2. When setting the unit price and amount, the user may forget to click the "OK" button, resulting in the invalid unit price and amount set; 3. When setting the unit price and amount, the user may forget to click the "Save" button, resulting in the set unit price and amount cannot be saved. Solution: 1. When setting the unit price and amount, the input value should be carefully checked to avoid input errors; 2. When setting the unit price and amount, be sure to click the "OK" button to ensure that the set unit price and amount are valid; 3. When setting the unit price and amount, be sure to click the "Save" button to ensure that the set unit price and amount can be saved.

Personal tip: When setting the unit price and amount, be sure to double-check the values entered, and remember to click the "OK" and "Save" buttons to ensure that the unit price and amount you set are valid and can be saved.