Why do shared printers have to be turned back on every time to print

XP sharing settings.

Folder options View Tick Use Simple File Sharing.

1. Control Panel Management Tools Computer Management Local Users and Group Users. Enable the guest guest account.

2. In the control panel management tools local security policy local policy user rights assignment, add the guest account in "Access this computer from the network", and delete the guest account from "Refuse to access this computer from the network";

3. In the Control Panel Management Tools Local Security Policy Local Policy Security Options, set "Network Access: Sharing and Security Mode for Local Accounts" to "Guest Only - Local User Authentication for Guests".

Enable LAN sharing (no authentication required), Windows

The XPprofessional Edition is set as follows:

1. Anonymous enumerations that allow SAM accounts and sharing:

Control Panel Performance and Maintenance Management Tools Local Security Policies Security Options Network Access: Anonymous Enumeration of SAM Accounts and Sharing Not Allowed: Disabled.

2. If the password of the local account is empty, allow other machines to access the local machine

Control Panel Performance and Maintenance Administrative Tools Local Security Policies Security Options Accounts: Local accounts with blank passwords are allowed to log in to the console only: Disabled.

3. Sharing method: local user guest authentication.

Control Panel Performance and Maintenance Management Tools Local Security Policies Local Policies Security Options Network Access: Shared and Security Mode for Local Accounts: Guest Only - Local Users Authenticate for Guest Share.

4. Windows Firewall: Allow file and printer sharing.

Control Panel Network & Internet Connectivity Windows Firewall Exceptions Tick File & Printer Sharing.

5. Enable the guest account.

Control Panel User Account Guest Enable Guest Accounts.

After the setup is complete, restart the machine to share files and printers externally (if there are other firewalls, please set them accordingly.)

1. Use the network printer to install, not the connected printer.

2. The guest user is not enabled.

3. You can set a fixed IP for each computer, don't get it automatically.

Solution: 1. Anonymous enumeration that allows SAM accounts and sharing: Control Panel Performance and Maintenance Management Tools Local Security Policy Security Options Network Access: Anonymous enumeration that does not allow SAM accounts and Weizen sharing: Disabled.

2. If the password of the local account is empty, other machines are allowed to access the machine: Control Panel Performance and Maintenance Management Tools Local Security Policy Security Options Account: The local account with a blank password is only allowed to log in to the control platform: It means that Jinchen has been disabled.

3. Sharing mode: local user guest authentication, control panel performance and maintenance management tools local security policy local policy security options network access: sharing and security mode of local accounts: guest only - local users are verified by guests.

4. Windows Firewall: Allow file and printer sharing. Control Panel Network & Internet Connectivity Windows Firewall Exceptions Tick File & Printer Sharing.

5. Enable the guest account. Control Panel User Account Guest Enable Guest Account , after the setup is completed, restart the machine to share files and share printers externally (if there are other firewalls, please set accordingly.)

The reason why the network share printer needs the host to print once before others can play is that the service is started and the permissions are not opened. Here's how:

1. See if the service has been started.

1. Right-click on My Computer and select [Manage].

2. Enter the computer management interface and click on the services and applications.

services, after clicking [Service], a lot of services will come out on the right.

3. Find the server, print spooler, workstation, secondary logon services and start them, if they are started, look at the permissions.

Second, after the service is started, let's take a look at the permissions.

1. Click the [Start] button, which Qingzai selects the difference and selects [Equipment and Printer].

2. Find the printer you want to share in the pop-up window, right-click on the printer, and select [Printer Properties].

3. In the [Security] tab, turn on all permissions for everyone, and then confirm to log out.

Notes:

If it still doesn't work after the above service is started and the permissions are opened, it is the driver who asks Li Wang. Even if the driver installed by the printer is the official website**The driver that meets the model is useless.,You need to play the printer's after-sales service**,Tell the problem and they will send the driver to you.,You can use it when you install it.。

Most printers are shared, so in the process of use, there are often situations where the printer cannot be connected, sometimes including the local computer can not print, the following is the relevant information I have compiled for you about the shared printer computer restart can not be printed in, I hope it will help you!

The solution to the problem that the shared printer computer cannot be printed if it is restarted

Step 1: If the network printer is not available, the first thing we think about is that we must check whether the local computer can print, that is, try printing things on the computer connected to the printer.

Step 2: If there is no problem with local printing, we can consider restarting the local computer. After the reboot is complete, ask the network computer to try to connect again, if it still can't connect. At this point, consider restarting your network computer and trying again.

Step 3: If the problem still exists after restarting the network computer, we need to check whether the network computer is prohibited from sharing, that is, the network computer is prohibited from connecting with external computers. You must turn on the ability to share with external computers.

1. We want to set up a working group on the network computer, which must be in the same working group as the local computer of the printer. Let's directly double-click on "Online Neighbors" - "Set up a home or small office network" as shown in the following figure:

2. We directly click "Set up a home or small office network" to enter the "Network Installation Wizard". As shown in the figure below:

<>5. The name of the next workgroup must be the same as the name of the workgroup of the local computer connected to the printer. As shown in the figure below:

<> Step 4: Next, we need to open all the Gusme users on the local computer and the network computer. Here's how:

1. Open the "Control Panel" - User Account" and go directly to the user account. Then we find the "guest" user. As shown in the figure below:

2. Initially, it was not enabled, so let's click to enter the settings interface and click "Enable Guest Account". As shown in the figure below:

Step 5: If all of the above operations are completed, try again to see if it can print normally, if it is not normal, the next step is to consider reinstalling the printer driver.

Step 6: Let's install the driver directly. Before installing, you can uninstall the original one.

1. We use the driver installation package to install, and sometimes it really can't be installed. Old tip no printer connected. As shown in the figure below:

2. In this case, it cannot be installed directly, and we can only use third-party software to install it at this time. This will result in a successful installation. As shown in the figure below:

Step 7: After the installation is completed, we restart the local computer again, and then let the network computer connect again, this time it is successfully connected, and everything is back to normal.

When using the printer on the computer, you often encounter the problem of not being able to connect, how to deal with this problem? The following is the relevant information that I have compiled for you about the computer that cannot be used after the restart of the shared printer, I hope it will help you!

Generally, if the system is just installed, if the system program is not changed much, the shared connection is normal. If you can't connect for the time being, we can connect again with the following methods.

The first method is to click the start menu in the lower left corner of the desktop, open the control panel, click on Printers and Faxes, click Add Printers on the left side of Printers and Faxes, select Next in the pop-up Add Printer Wizard, and then select the "Network Printer or Printer connected to other computers" option, and then in the next step, you can choose"Browse Printers", if you know the exact name of the other party's network neighbor and the name of the printer, you can also select the "Connect to this printer" option.

The details are shown in the figure below.

<> the second method is simpler, you can double-click on the Internet neighbor on the desktop, click on the "View Workgroup Computer" option on the left side of the Internet Neighbor interface, and double-click the printer point that needs to be connected in it, as shown in the figure:

<> if you can't connect, and it says "Ghust user is disabled", you can go to the control panel, click "Management Tools" in the control panel, select "Computer Management", select "Local Users and Groups" on the left, and right-click "Guest" in the user"attributes, check the "user cannot change the password" and "the account has been deactivated" in the attributes, and click OK. As shown in the figure below, the guest account is enabled.

<> if the above methods still don't work, go ahead and select Control Panel, Administrative Tools, and select "Local Security Policy". Click "User Rights Assignment" in "Local Policy", find "Access to computers from the network" in the policy on the right, and set "guest"."The user is added. Then find "Deny access to this computer from the network" and delete it if you see "guest" in the policy.

Click OK to save. As shown in the figure below.

The shared printer can be set up on the same day, but it will not work the next day, and you need to set the printer again.

The specific steps are as follows:

1. On the computer desktop.

In the lower left corner, use the mouse to click "Start" and select "Printer for Devices".

2. Select "Add Printer" in the opening window.

<>4. Use the mouse in the lower left corner of the computer desktop to click "Start" and then select "Devices and Printers".

5. Select the printer you want to share, and then right-click and select "Printer Properties".

6. In the open window, click "Share this printer", and click OK to close the current window.

Solution and steps:

1. Right-click the "Share Printer" icon, select "Printing Preferences", and the "Printing Preferences" prompt box will pop up, as follows:

2. Right-click the "Share Printer" icon, select "Properties", and the "Printer Properties" prompt box will pop up, as follows:

3. Restart the "print spooler" in the "service"."server"Two services, as follows:

4. Enter the IP address of the host computer of the shared printer in the address bar of "My Computer" (or enter the IP address in "Run").

5. If you can access the shared document, then you should be able to see the printer that can be shared, as follows:

6. If you can't access the "shared file or printer" by entering the IP address, or you need the "account and password" to access, there is a problem with the sharing settings and you need to set it again, as follows:

7. Open the "Control Panel" and tick the box in front of "File and Printer Sharing" - confirm the exit.

8. Right-click "My Computer" and click Manage to open Computer Management, Local Users and Groups, Users.

19. Open the "User Rights Assignment" in the control panel, find "Refuse local login" in the right area, double-click to enter the state, delete the guest, and confirm the exit.

10. Click "Security Options" on the left, find "Network Access: Sharing and Security Mode of Local Accounts" in the right area, and double-click to enter "Guest Only - Local User Guest Authentication".

No, our company's printers don't need to be like this, and you can print from any computer you want after turning it on.

As long as the printer sharing is set up, other computers can print when they want to print, but the premise is that the host that connects the printer must be turned on, you can also buy a network sharer to connect to the printer, so that you can print without connecting to the computer, this premise is that the printer must support the network.