What is a wired burglar alarm host?

The wired alarm control host adopts advanced microprocessing technology as the control core, with high integration, good reliability, a variety of flexible interfaces, and the product is widely used and easy to use.

Function: high-speed digital communication mode, compatible with ADEMCO4+2 and CID digital communication protocol; Signal to the alarm center.

The system can be programmed to a variety of settings, such as alarm mode, defense area type, recording, monitoring, remote control, number, line detection, forced arming, output, etc.

Wired and wireless compatible (9000-5 9000-6).

2 sets of 6-digit user passwords and 1 set of 6-digit setting passwords can be changed by yourself;

You can set 4 groups of alarm numbers (fixed** or mobile phone number) and 1 set of alarm center ** numbers. When the alarm is triggered, the dial is cycled.

5 types of arming: single defense area arming, departure arming, perimeter arming, delayed arming, remote arming.

5 kinds of defense methods: single defense area defense, password keypad defense, remote defense, alarm protection, remote control.

There are 5 types of defense zones: real-time defense zone, delayed defense zone, 24-hour defense zone, perimeter defense zone, and bypass defense zone.

It can be remotely controlled, and can be connected to an external monitoring head, remotely monitor the on-site alarm, and drive the on-site alarm.

Built-in voice module, which can record 10-20 seconds of voice and make voice alarm.

The remote control can be used for arming, disarming, emergency alarm and other operations (9000-5 9000-6).

It can be operated with the host keyboard shortcuts, which is simple and convenient.

It can be set up with ** line detection function, anti-shear and anti-lightning strike.

A keyboard with alarm output can be used, and the time of alarm output can be set, and the output is normally open and normally closed.

It has a "watchdog" function to prevent crashes.

Technical indicators: power supply: AC220V+10%.

Quiescent current consumption: 100mA

The power is less than.

Siren output: 400mA or more, 12V

Output voltage: DC12V 15V

Wireless reception frequency: 315MHz

Ambient temperature: -10-55 ° C

Ambient humidity: 40-70%.

Weight: Iron box size: 255mm 235mm 70mm

Keyboard size: 159mm 138mm 33mm

Hello, I am mainly doing supermarket clothing anti-theft, this kind of problem I can, you can go to search for the above, no, I will search for you and post it.

Most of our current anti-theft means rely on civil air defense and physical defense (such as anti-theft doors, iron guardrails, etc.), if there are conditions, the use of technical means of prevention will receive twice the result with half the effort.

1. Install infrared anti-theft alarm device. When this alarm device is in working condition, it can emit infrared light that is invisible to the naked eye, as long as the person enters the light control range, the device will immediately send out an alarm sound, if there is a thief entering, the residents can immediately find it, and the thief himself does not know, often tied up.

2. Install electromagnetic password door locks. To install this kind of lock, you need to press the password first when unlocking it from the outside, otherwise it cannot be unlocked; If it is pried open, the alarm device will sound when it is locked. This will alarm the people or neighbors in the room, scare away the thieves, and capture the thieves.

3. Actively cooperate with and actively participate in the urban community alarm networking system. After the user installs this alarm device, in case of dangerous situation (such as burglary), the alarm will automatically send out an alarm through the pre-set defense area, and the alarm receiving device of the police station will automatically display the user's exact address immediately, and the police can quickly dispatch the police to the scene of the crime and arrest the culprit.

Alarm host. The alarm system is a system that uses physical methods or electronic technology to automatically detect the intrusion behavior that occurs in the arming monitoring area, generates an alarm signal, and prompts the personnel on duty to occur in the area where the alarm occurs, and shows the system that may take Tongjian countermeasures. The alarm host is an important facility to prevent accidents such as robbery and theft.

The anti-theft closed-wheel alarm system and the entrance and exit control system, closed-circuit television monitoring system, visitor intercom system and electronic patrol system together constitute a security system.

To the alarm host is the anti-theft system in your computer, and suddenly an alarm sounds.

The anti-theft alarm is the use of physical methods or electronic technology to automatically detect the intrusion behavior that occurs in the arming monitoring area, generate an alarm signal, and prompt the personnel on duty to alarm the area of the alarm, and display the possible countermeasures of the wild damage alarm system set up to be prepared.

Anti-theft alarm host: The "shouting mountain source brain" of the alarm system is only filial piety, which processes the signal of the detector and provides Zheng state-cloth disarming operation through keyboards and other equipment to control the alarm system. Sound and light prompts can be provided when alarming, and the alarm can also be transmitted to the alarm center through the ** line.

Schematic diagram of burglar alarm system.

1.What is a burglar alarm? The anti-theft alarm system uses physical methods or electronic technology to automatically detect the occurrence of the arming monitoring area.

2.What is the use of the anti-theft alarm host? Security is well known that the anti-theft alarm host is the use of physical methods or electronic technology, which can be a certain degree.

3.Partition and defense area: It is generally recommended that the alarm host with medium or above planning should be set up in a partition, so that the handling can be convenient, and the large host can even be set up.

4.Disarming and disarming alarm: The varieties of security disarming include left-behind disarming, outgoing disarming, active disarming, etc., the more complete the type

Some are a high-performance computer, and some units have money to add a small server as a host, put in a dedicated anti-theft program software, here and all the unit's surveillance cameras and alarm system are connected, there is a 110 system connected, such as theft, the system will automatically alarm and will automatically alarm to the 110 system, which can reduce the alarm time and speed up the response speed, such as the bank's system, when the bank's alarm system alarms, All the police forces on the street and the nearest police force will quickly assemble at the bank that called the police, and it will be there in the fastest minute.

In fact, it is an integrated controller, with the first alarm, remote control, that is, after the host alarm, through the first line connected to the host to notify the user, the user can monitor the host on the spot, and can operate the host remotely or by mobile phone, so that the host can exit the police state or let the host enter the police state!

**The one with an antenna is an intelligent anti-theft alarm host.

Most of today's wireless burglar alarm devices choose wireless burglar alarms. Because wired burglar alarms need wiring, it can damage the overall beauty at home. And the wiring at home is troublesome, if you want to move the burglar alarm, it is more troublesome.

The layout of the house at home was not specifically described for security at first, and if you are equipped with burglar alarms, the location is very important. The wired burglar alarm is messy after the equipment is disassembled, and there are difficulties such as wiring, which is really not an alarm suitable for equipment at home.

Wired burglar alarm system.

Advantages: Because it is a dedicated line, the alarm signal transmission is relatively stable and not easy to be interfered by external factors.

Disadvantages: Affect the appearance, the construction workload is large, the operation is complex, the maintenance is inconvenient, and it must be maintained by special personnel.

Wireless burglar alarm system.

Advantages: It will not destroy the overall appearance of the prevention area, simple installation, easy operation, and will be learned as soon as you learn.

Disadvantages: The alarm signal will be interfered by external factors, resulting in the attenuation of the transmission distance of the alarm signal.

Should you choose a wired or wireless system for a home burglar alarm system? The scope of this issue is huge, but as far as families are concerned, our view is:

If your home is pre-renovation or your home is too large (especially a duplex or a small high-rise), you have some knowledge and experience in the installation of anti-theft systems (or you can find a technician to assist you with the installation), we recommend that you use the wired method; The reason is: when we decorate the house, we must transform the wiring of the entire house, and the wiring of the security system is particularly convenient, no matter what, the stability of the wired mode is undoubted; It is also best to use wired housing (duplex structure, villa, etc.) for oversized housing, because wireless door sensors, small buttons, and some small detectors have limited wireless transmission distance, and too far away may produce false alarms or false negatives.

For customers with a small housing area (less than 150 square meters), we recommend using the wireless method, because the ordinary wireless burglar alarm system can meet the requirements of wireless transmission; The reason is that the wireless system allows you to change the protection area and location at any time according to your needs, and it is also very convenient to add or remove equipment. A reminder is that:

If the method is wired, if possible, as many spare lines as possible, and the confirmation of the location will be arranged by a professional for you.

a The installation location should be open, so that it can receive the alarm signal from each detector more smoothly.

b The location of the host should be hidden and not easy to be detected.

c The connection cable with the host should be properly connected.

d. Do not install the host next to high-frequency electrical appliances; so as not to be interfered with by electromagnetic waves.

e The installation of the main engine should be more than one meter away from the ground to avoid the interference of ground shielding.

f After installation, the receiving antenna should be pulled out. a. The host receives the alarm signal sent by each detector.

1) Analyze the surrounding environment (place, electrical appliances and whether it is placed underground) of the host installation.

2) Whether it is interfered with by electromagnetic waves.

3) Check whether the host antenna is pulled out in case the distance between the host and each detector is too far.

4) Whether the host is damaged.

5) Whether the ** machine connected to the host is in the anti-theft ** state or whether the ** machine is in the audio state.

b. The preset ** of the host cannot be dialed.

1) **Whether it has been set correctly.

2) Check the cable.

3) Check if it's direct dialing or internal.

4) Check if the ** wire is damaged.

Guess if you are in arrears 6) **Whether you are in arrears.

7) Whether the owner is using the **China** network or the Tietong network.

Split line alarm host, is a small wired alarm system usually used in a class (1-16 close defense area), alarm peripheral accessories of the signal respectively pull the line back to the alarm host, on the market CK2300 series, Shenzhou Taixun CVC-O, CVC-V series are split line alarm controller.

The bus alarm host is a kind of alarm host used in the large wired alarm system or the small wired alarm system that is inconvenient to wiring, and the communication mode is currently based on MUX bus (Bosch, Fox bus (Shenzhou Taixun, CVC).

The zone display has been increased to 4 groups of alarms**. Wired six defense area microcomputer control, support 4 groups of alarm**, when the alarm occurs and the 110 alarm center networking, can also automatically dial mobile**.

Group user opcodes. 15 groups of user operation codes, different control permissions, control keyboards, passwords, host arming, disarming, disarming, bypass, group bypass, etc.

3. Communication protocol: 3 1 Extension 4+2 CFSK Add the international ContactID protocol, CFSK +Time Stamp protocol, a total of 5 protocols.

4. Arming and disarming alarm delay function, dialing number function after alarm, and alarm ringing time setting function.

5. Separate control function of the defense zone, each defense zone can set the detection response time, dial different ** numbers, arming type, ring type, can be separately defined to upload the report code of the alarm center, can set the switch of the doorbell function, the switch of bypass and group bypass, and the delay dialing time.

6. Anti-hijacking function.

7. Doorbell function (when the host is in the disarming state, there will be a BB sound prompt when the accessories are triggered).

8. The host self-test function, the host self-test time can be set to (15 minutes 24 hours).

9. The defense area is separately deployed to disarm and disarm the group bypass function.

10. The host has low current detection function and AC power-off function.

11. The host can be connected to up to 4 external control keyboards, the distance between the Li finger keyboard and the host is 152 meters, and the keyboard has 6 defense zones LED display.

Road wired defense area, wired defense area accessories leather socks power supply, according to the length of the line of the wired accessories, selected by the host centralized power supply or separate power supply.

13. Line grab dialing function.

14. Add the anti-shear function of ** line.

The so-called wired alarm alarm is relative to the wireless anti-theft alarm, and the communication mode between the alarm peripheral accessories and the host is divided into two categories: wireless and wired. The wired burglar alarm is divided into a split line burglar alarm and a bus burglar alarm.