What are the reasons for Lenovo P700 dial slow response?

We apologize for any inconvenience caused. If it takes a long time to dial out after you enter the number, it is recommended that you restart your phone to observe, if the restart does not work, please try:

1.Please check whether the surrounding network signal is poor, and it is recommended to try to compare in a more stable environment;

2.If the phone has Lenovo Contacts, it is recommended to go to System Settings - Applications - Click Lenovo Contacts to clear the data, if there is an update, please uninstall the update, and then try to update again;

3.Optimize the system and try to clear the cache data, which can be assisted by software such as Le'an;

4.Please back up your data and try it after restoring it to factory settings.

Lenovo authorized repair site inquiry.

The business hours of the maintenance site are usually from Monday to Sunday from 9:00 to 18:00, except for holidays, and the stations will be slightly adjusted according to their own operations.

See if your program is full

Hello. We apologize for the inconvenience.

If your device is not running smoothly, you can try to adjust it in the following ways:

1. Frequently or regularly use the mobile phone acceleration function of security software such as Le'an to clean up background applications, which can effectively release the running memory;

2. It is recommended to uninstall useless or infrequently used software, which can prevent the self-start of such software and occupy running memory;

3. After the application is finished, try to use the exit function of the application to completely exit to avoid the application hanging in the background and occupying the running memory;

4. If there is no obvious improvement after trying the above operations, it is recommended that you back up the important data of the fuselage and try to restore the factory settings to improve.

The running memory is low.,It's recommended to uninstall the software that you don't use.。。。

Dear Lenovo mobile phone users, hello!

Under normal circumstances, after pressing the dial button on the mobile phone, it will immediately enter the dialing interface (or may be delayed by about 1s) to display the dialing. If you dial the number, it can be displayed as dialing, but it will take about 10 seconds to dial in the call, which may be caused by the instability of your current network signal.

If you need to wait for about 10s before you will jump to the dial, it may be caused by the system background jamming, or the system dialer is abnormal. It is recommended that you try to back up the important data of the body, and then go to the system settings of the phone - Backup and reset to restore the factory settings of the phone to see if it can be improved.

If it is abnormal and cannot be effectively solved, we recommend that you take the time to go to your local Lenovo after-sales service center and let the engineer help detect and solve it. You can log in to the official website to check the address.

Lenovo asked.

Make inquiries and find out. Have a great day!

Dear Lenovo users, hello!

Depending on your situation, please do so.

You can search for keywords to find the solution, and if not, you can also talk to a professional about your problem in the technical forum. Or inquire about mobile phone after-sales service through this link**, and consult the mobile phone engineer for details. Pei shouted.

IDEA Forum.

Think Forum.

Lenovo is a Chinese travel community.

The machine is stuck, just re-swipe the machine.

This is a serious matter! If not! Running stuff more.

Well, this is when you turn off the background light, maybe set it to 5 seconds or 10 seconds, and the screen will automatically turn off, you go to the phone settings to reset it.

Because the P700i model has a built-in proximity sensor, when making a call, the ears and cheeks are close to the screen, in order to avoid mishandling the touch to the phone, the screen will automatically lock the screen and go black. If the screen cannot be automatically woken up after the call ends and your ears and cheeks leave the screen, please refer to the following suggestions:

1.If you use a film or shell, it is recommended to remove it, and it is not ruled out that the proximity sensor is covered and causes abnormality;

2.You can detect the relevant sensors in the testing center function in Lenovo service, and consider sending it to the repair station if there is an abnormality;

3.Please back up the fuselage data and try to restore the factory settings (System Settings - Backup and Reset - Factory Reset);

4.If it cannot be improved after recovery, it is recommended that you take the time to send it to a Lenovo repair station for specific testing and treatment.

Lenovo authorized after-sales site inquiry:

I hope the above reply is helpful to you and I wish you a happy life!

That's it. Mine too! You click the power button above and it will light up.

Is there a film on your mobile phone screen? It must be that the film on the side of the camera is a little bubble or flower, resulting in the light sensor of the mobile phone's camera not being able to scan, so the screen will be black, and it will light up if you tear off the film, or when it is still dark, you will light up when you tap the camera with your finger. This is also what the maintenance engineer told me when I went to the maintenance point after I was in the same situation as you.

Do as I say, I hope it helps.

Mine too, you can enter the dial-up interface - the menu button in the lower left corner - call settings - proximity sensor (unchecked), so that the screen will not be dark when you are close to your face when you are talking; Hope it helps.

If the battery is too low, it will automatically shut down!

It's hard to do, clear everything you don't want, move all the software that can be moved to the SD card, and if you can't do it, it's only root.

We're sorry for the confusion.

If your device does not run smoothly with the skin, you can try to adjust and improve it in the following ways:

1. Frequently or regularly use the mobile phone acceleration function of security software such as Le'an to clean up background applications, which can effectively release the running memory; Talk about lead.

2. It is recommended to uninstall useless or infrequently used software, which can prevent the self-start of such software and occupy running memory;

3. After the application is finished, try to use the exit function of the application to completely exit to avoid the application hanging in the background and occupying the running memory;

4. If you can't improve it after trying the above methods, it is recommended that you back up the important data of the fuselage and try to restore the factory settings.

If you have any other doubts during the subsequent use of the mobile phone, you can log in to the following platform to communicate with us:

1. Lenovo mobile phone and tablet PC enterprise platform.

2. Lenovo asks (