When driving on the highway at night, should I use high beam or low beam?

When driving on the highway at night, do you turn on the high beams or low beams? Whether it is for old drivers or novice drivers, the three words "Yuanguang Dog" can be described as "deeply rooted in the hearts of the people"! Many new and old drivers have this question - do they use high beams or low beams when driving at high speeds at night?

Xiao Wan is here to tell you that if you are driving at high speed at night, it is best to turn on the high beams. First of all, most of the high-speed sections have isolation belts, and the use of high beams in general family cars and SUVs will not affect the oncoming cars on the opposite side, so you can use them with confidence. Secondly, most of the high-speed sections do not have street lights, if you use low beams, the lighting situation will be poor, in the case of fast speed, what conditions on the road may not have time to react, easy to cause accidents.

Of course, if you pass through a highway section without a separation zone, when there is an oncoming car on the opposite side, you still have to switch to low beam to avoid obstructing the view of the oncoming traffic. After the interaction between the cars, switch to the high beams and continue driving. If the other party's high beam gets in the way, you can switch the high and low beam three times in a row to remind the other party that if the other party cuts the low beam, you can also cut the low beam, and if the other party does not react, you can also continue to use the high beam, there is no need to be humble in this situation.

Apart from the highway, what sections of the road are it necessary to use high beams?

If the road lighting is not good in the non-high-speed section, you can use the high beam first, and the opposite car will switch in time to ensure safety.

In addition, we should also remind everyone to pay attention to one point, do not use headlights because the road lighting is enough, the headlights of the vehicle have two functions, the first is to let others see you, and the second is to illuminate the road in front of you, especially in the tunnel, it is recommended to turn on the headlights, so as not to cause accidents when other vehicles can not see your car when changing lanes. Rational use of lights, scientific use of lights, and standardized use of lights, so as to ensure the safety of car travel, I hope to help new and old drivers.

Personally, I think you should drive high beams when driving on the highway at night, because the car will travel fast on the highway, so we need to see the situation in the distance.

When driving on the highway at night, turn on the high beams if there is no car in front of you, and turn on the low beams if there is a car in front of you. It's traffic common sense.

Be sure to use high beams. Because you can see a long distance from the high beam, you can avoid traffic accidents in an emergency.

The low beam and the high beam need to be exchanged, and the old use of the low beam field of view is not enough, and the high beam has an impact on the driver of the car in front.

The low beam is the main one, and if the distance from the car in front is large, the high beam is intermittently hit.

Lights are generally available on highways, and the separation tape can shield the lights in the opposite lane.

I often have friends who consult my brother, especially some novice drivers who have just bought a car. When taking the driver's license test, the instructor may be more emphasized, or the book may be too rigid. When the lighting conditions are good, be sure to turn on the low beam.

Anyway, we use less high beams. There's nothing wrong with that. Use the high beam sparingly, because it is too strong and will flash to others, so you don't need the high beam when it affects others, and you can't use it when it doesn't affect others.

For example, when driving at high speed, there is no car at all, and the street lighting conditions are not good at night, can you not use high beams?

So should you use low beam or high beam to drive at high speed? Today, Brother Miao will tell you about this problem. If we drive at high speed, the road conditions are good, and the distance from the car is far away, even if there is no car, what is the use of low beam, at most 50 meters.

At a speed of 100 km h, there is a reaction time of less than two seconds. If there is an obstacle or a car ahead, we simply can't find it. When we pass by, we can only listen to the destiny of heaven.

As we all know, when designing most highways, there are isolation facilities in the middle of the oncoming lanes, and there are basically light isolation facilities, such as street trees one after another, which are narrow in some places, and there will be some light barriers, so you basically don't have to worry too much about affecting the oncoming vehicles. Because after the lights are on, they are basically blocked. So don't worry, even if there are some places where you are occasionally optimistic, it's better than turning on the near light and not being able to see the road clearly.

In the second case, you should pay a little attention. Some drivers are really close to the car, and the high beams are always shining on you. As we all know, if your car is very close to someone else at night, turning on the high beams will actually hurt the driver in front of you, because the left and right sides of the three mirrors on the car and the rearview mirror in the middle of the car will reflect the light to the driver's eyes.

Although the middle rearview mirror can adjust the anti-glare mode, it is still uncomfortable after a long time, and the left and right sides cannot face the floor. Therefore, Brother Miao suggested that if the distance between the car and the car at high speed is less than 100 meters, do not hesitate to switch the high beams to low beams, because as long as you follow the car in front, the general problem will not be too big, don't worry too much!

If there is no vehicle in front of you, you can use high beams, because the line of sight will be particularly poor on highways, and if there is a vehicle in front of you, you cannot use high beams.

It is best to use high beams when going at high speeds. Because if you walk on the highway at night, there will not be many cars on it, and if you use high beams, you can see the surrounding environment more clearly, which will be conducive to safe driving.

It is better to use high beams, because the traffic flow is very fast on the highway, and strong lights can be used to let distant cars see.

Driving on the highway at night, theoretically we must turn on the high beams, because driving on the highway, the speed is relatively fast, we need to explore and collect information on farther road conditions, you think, we are moving forward at a speed of 120 kilometers per hour, more than 30 meters per second, the road conditions and vehicle dynamics in front of us, not in our control, how dangerous it will be, in the process of driving, we must grasp the road conditions in front of us far enough information, must be clear, so, turn on the high beams for the safety of our driving, It plays a decisive role.

According to the traffic flow on the road, choose the right lights, most of the time, generally use high beams, because it is generally dark on the highway.

First of all, because the highway is different from the urban road, the highway has almost no lights, in this condition do not turn on the high beams, coupled with the fast speed, encounter traffic jams, stones or other situations in front, the probability of the driver is much higher than the urban road. For the driver to worry about affecting the oncoming car, in fact, this can rest assured, because the highway is different from the urban road, the two opposite lanes of the highway will use a light shield, this light shield is specifically designed to prevent the high beam from affecting the oncoming car, so the highway has been considered when the construction of the car needs to use the high beam, so there is no problem in the highway at night to turn on the high beam.

A: My suggestion is to open the high beam, in this regard, I think it is the most important thing to have the light, which is also a guarantee for the safety of the driver.

High beams are required by law to be used on highways. According to Article 58 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China, high beams can be used if there is no street lighting or the lighting is not good on the road.

At night, you basically use low beams when you walk on the highway, because the speed is relatively fast on the highway, and the high beams are easy to affect the line of sight of the opposite lane.

Low beams should be used, as high beams can be particularly dangerous and will affect the vision of the oncoming driver.

When driving on the highway at night, you need to turn on your high beams. This is different from normal driving in the city. Because there are no street lights on the highway, the line of sight is very poor, and we have to see clearly with the headlights.

Also, considering that turning on the headlights may affect the driver's vision on the road, there are usually obstacles on the highway and the lanes are one-way streets. Therefore, when driving with high beams at night, there is no need to worry about the impact on the vehicle (because there is an obstacle in the middle), nor is there a fear of danger caused by the opposite vehicle.

<> if you don't turn on your high beams at high speeds, you won't be able to see the road ahead in time, and it's fast enough to get into traffic accidents. But don't be too rigid. Sometimes you need to use close-up lighting.

For example, if you plan to walk behind a car for a long time, you will switch to low beams because high beams reach the driver through the rearview mirror of the car in front and affect the driver's vision.

At night, if we are driving at high speed, then many people may turn on the low beams, in fact, this is wrong, we should give priority to using high beams when driving, especially at high speeds, because the traffic speed on the highway is very fast, and there are no street lights, the lights we use basically do not see the road in low conditions, and the low beams of our cars will also illuminate a limited distance, so if there is an accident or obstacle ahead, it is difficult for us to have time to react.

Do a detailed explanation of the problem for a detailed interpretation of the problem, I hope it will help you, if you still have any questions, you can leave me a message in the comment area, you can comment with me more, if there is something wrong, you can also interact with me more This Li, if you like the author, you can also follow me, your like is the biggest help to me, thank you. That's all for sharing, if you like me, please follow me. If you guys have any ideas, you can let us know in the comments below.

Depending on the situation, don't think that you can always use the high beams when there are not many vehicles driving at high speed and have a wide field of vision, once the high beams are used, they will greatly affect the driving of the car in front. Many people hate the high beam dog, once in the right line, a high beam will catch you off guard, and in an instant it will make you blind for a short time, and you can't see the road situation in front of you at all. As long as there is a car within the visual distance ahead, turn on the low beam, if there is no car, you can turn on the high beam.

In fact, in the same way, if there is a car driving high beam behind the high-speed, you will inevitably feel blind, and hit the rearview mirror to the anti-glare with Mori Chun, so that the observation and visibility of the rear will decrease.

Because you are taking the highway, you should choose the high beam, because the speed of your tanburn is the speed limit, so you should hit the high beam on the speed road in Qiaoyan, for the sake of your own safety.

I think you should choose high beams when walking at high speed at night, but when a car arrives, you should switch the low beam in time to avoid affecting the view of the other vehicle.

When driving on the highway at night, you should turn on your high beams. The driving speed is fast, there are requirements for the line of sight distance, and the high beam is a necessary means to ensure the sight distance on the road where there is no light at night and is relatively idle.

The highway can turn on the high beam at night, because there are generally obstacles in the middle of the highway to block the high beam without worrying about the danger caused by the traffic on the opposite side. Generally, it is best not to drive high beams when driving in the city, because the lighting conditions in the city are generally better. If the angle of the high beam is too high, it is easy to shake the eyes of oncoming cars and surrounding pedestrians, affecting the vision of others, which is very unsafe and is an impolite driving behavior.

However, at night, the high beam can be turned on and off alternately to warn pedestrians and vehicles around the horn to avoid causing too much noise. When driving on highways and in places where there are no street lights in the suburbs, you can turn on the high beam to expand the field of vision. However, when there is a car on the opposite side and you need to meet the car, for the sake of safety and courtesy, switch to low beam.

When driving at low speeds, the engine does not generate enough power, the battery is in a negative charging state, and turning on the high beams will affect its service life. In addition, the use of high beams at low speeds at night will also increase the fuel consumption of the vehicle, which is obviously not cost-effective under the high price of fuel.