What information is required when deregistering a Class 1 Constructor

Hello, the specific situation of the cancellation of the first-class constructor is as follows: the cancellation of registration is generally the termination of the cooperative relationship between the holder and the affiliated unit, and the cancellation of the registered constructor of the original unit. The premise of registration is that you need to find a unit, and there are many scenarios for the cancellation of registration of first-class constructors, and the department that mainly handles the cancellation procedures is the provincial construction department.

After the cancellation of this certificate, if the holder wants to continue to practice, he needs to re-meet the registration conditions and go through the procedures and procedures for initial registration. Relevant materials need to be submitted for the certificate of cancellation of registration, first of all, the application form for cancellation of registration of first-class registered constructors needs to be submitted, ** needs to be filled in truthfully. In addition, the original registration certificate and practice seal must be provided, which are issued after the certificate is successfully registered, and need to be provided when the registration is cancelled.

The steps for canceling the qualification certificate of the first-class constructor are as follows:

1. Log in to the provincial first-level construction engineer registration management system.

2. Individuals first log in to the user portal page of the personal version of the system, fill in the "Application Form for Cancellation of Registration" in it, and then save it.

3. Generally, you can check the cancellation status online within 15 days after acceptance.

Supplement. The first-class construction engineer qualification examination consists of four subjects: "Construction Engineering Economy", "Construction Engineering Regulations and Related Knowledge", "Construction Engineering Project Management" and "Professional Engineering Management and Practice".

Among them, the subject of "Professional Engineering Management and Practice" is divided into 10 professional categories: construction engineering (consolidated), highway engineering, railway engineering, civil aviation airport engineering, port and waterway engineering, water conservancy and hydropower engineering, municipal public works, communication and radio and television engineering, mining engineering, and mechanical and electrical engineering (merger).

One. The subject of "Professional Engineering Management and Practice" is a mixed paper of main and objective questions, and candidates should carefully read the precautions for test takers located on the second cover of the test paper and the instructions for answering on the first page of the special answer sheet.

Two. Candidates should bring a black ink pen, a 2B pencil, an eraser, and a silent calculator with no text function when taking the test.

Exam Subjects. The examination is divided into four subjects: "Construction Engineering Technology and Economy", "Construction Engineering Project Management", "Construction Engineering Regulations and Related Knowledge" and "Professional Knowledge and Practice of Construction Engineers".

The examination is administered on a rolling basis and is passed within two years.

Among them, the subject of "Professional Engineering Management and Practice" is divided into 10 professional categories: construction engineering (consolidated), highway engineering, railway engineering, civil aviation airport engineering, port and waterway engineering, water conservancy and hydropower engineering, municipal public works, communication and radio and television engineering, mining engineering, and mechanical and electrical engineering (merger).

1. The subject of "Professional Engineering Management and Practice" is a mixed paper of main and objective questions, and candidates should carefully read the precautions for candidates located on the second cover of the test paper and the answer requirements on the first page of the special answer sheet, and use the prescribed answering tools to answer in the demarcated area of the answer sheet. The subjective part must be answered in black ink pen, and the objective part must be filled in with a 2B pencil. The rest of the subjects are objective questions and are answered on the answer sheet with a 2B pencil.

2. Candidates should bring a black ink pen, a 2B pencil, an eraser, and a silent calculator with no text function when taking the test.

First Class Constructor.

It will take another 20 business days to re-register after cancellation. After the cancellation of the first-class constructor, the condition for new registration is to participate in the continuing education of the first-class constructor and meet the requirements of continuing education. The materials to be submitted for re-registration include: 1. Application Form for Re-registration of First-Class Constructor (printed after successful online application); 2. Original and photocopy of qualification certificate, academic certificate and identity certificate (returned after verification); 3. A copy of the employment labor contract signed between the applicant and the employing enterprise or the certificate of labor, personnel and wage relations issued by the employing enterprise; 4. Copies of supporting materials for meeting the requirements of continuing education.

How long does it take for a Class 1 Constructor to be re-registered after deregistrationTime limit for the preliminary examination of the district and county construction committee: 10 working days for initial registration, additional registration, and re-registration; 5 working days for the alteration, cancellation of registration, replacement of lost or defaced replacement of registration certificate.

Time limit for review by the Municipal Housing and Urban-Rural Development Commission: 5 working days for initial registration, additional registration, and re-registration; 3 working days for the alteration of registration certificate, cancellation of registration, replacement of lost or defaced replacement. For more questions about the Registered Class 1 Constructor Exam, you can go to the construction network for consultation.

According to Article 19 of the Administrative Measures for the Practice of Registered Constructors (Jian Shi No. 48 2008), when a registered constructor requests to cancel his registration, he or she shall provide valid proof of termination of labor relationship with the original employing enterprise, i.e., the dismissal or resignation certificate issued by the enterprise, the effective termination of labor relationship ruling issued by the labor arbitration department or the judgment of termination of labor relationship issued by the people's court, etc. If the original employer does not cooperate with the issuance of a dismissal or resignation certificate, you can terminate the employment relationship with the original employer through legal channels before applying for cancellation of registration. If the enterprise still refuses to cooperate with the relevant procedures of the construction engineer after the termination of the labor relationship with the original employing enterprise, you can submit the application report (indicating the registration experience, the dispute with the enterprise, and the handwritten signature and fingerprint of the person at the place where the report is settled) and the original and photocopy of the above-mentioned valid certification materials for the termination of the labor relationship, and appeal to the Registration Department of the Provincial Registration Center.

How individuals can forcibly deregister a first-class constructor

1. The builder himself holds the original ID card and signs the "Application for Compulsory Change and Cancellation" on the spot;

2. A copy of the ID card of the constructor;

The process of deregistration of the first-level constructor individual

1.If an individual applies for cancellation of the registration of a first-class constructor, after filling in the form, notify the enterprise to log in, inquire and confirm the cancellation of registration application submitted by the individual and click Report. If the enterprise proposes to cancel the registration, it is necessary to log in individually, and after confirmation, the enterprise will log in again and report.

2.After the enterprise reports successfully, the enterprise shall print two copies of the application form for cancellation of registration with a barcode, which shall be signed by the person in charge of the enterprise and stamped with the official seal of the enterprise.

3.The enterprise shall issue a "Certificate of Dismissal" to prove the termination of the labor contract relationship between itself and the enterprise. It should be noted that it is not possible to hold an expired employment contract. This certificate shall be in duplicate and shall also be stamped with the special seal of the enterprise contract.

4.Applicants need to write a "Application", to be concise and clear, not too long, write clearly that they want to cancel the registration can be, the process of the work can be roughly written a few sentences, in duplicate, preferably also stamped with the special seal of the enterprise contract.

5.If your first-class constructor certificate has been registered and used on the construction site, then you also need to write a "Description of the Use of Constructor Certificate", and the project you registered has been completed, in duplicate, with the official seal of the enterprise.

6.Prepare your Practising Certificate, Certificate of Registration, and Practising Seal.

7.First of all, it is necessary to go to the public service hall of the district and county urban and rural construction committee where the registered enterprise is located to handle the construction enterprise qualification window, and the clerk shall sign and seal a copy of the application form for cancellation of registration, the certificate of dissolution, and the application form, and if there is a description of the use of the construction engineer certificate, a copy shall also be retained.

8.Then the individual should bring the remaining "Application Form for Cancellation of Registration", "Certificate of Solution", "Application Form" and the practice qualification certificate, registration certificate and practice seal to the public service office hall of the Beijing Municipal Urban and Rural Development Commission.

9.Generally, within 15 days after acceptance, you can check the cancellation status online.

Theoretically, for the same major, it is necessary to cancel the existing registered second-level constructor certificate before registering as a first-class constructor; In practice, it seems that after registering a first-class constructor, the registered second-class constructor certificate of the same specialty will automatically become invalid. If you have a different major, you do not need to cancel the existing registered second-class construction engineer certificate, which is still valid and can continue to be used.

Whether to cancel the registration of the first construction and the second construction should be divided into the following two situations:

The first construction certificate and the second construction certificate are the same major

When your first construction certificate and the second construction certificate are the same major, the first construction certificate and the second construction certificate cannot be used at the same time, which means that when you obtain different levels of certificates in the same major at the same time, you must cancel the second construction before you can register the first construction. For example, if you have obtained both the first-level and second-class construction engineer certificates in the highway major, then your second construction certificate must be cancelled at this time. Otherwise, at the time of registration, the construction department finds that the certificate is duplicated, and the registration will not be approved.

The first and second construction certificates are different majors

If you have obtained the first and second construction certificates in different majors, it is likely that one of the certificates will be invalidated, but the two certificates must be registered in the same unit.

If you have obtained the Municipal Professional Level 2 Constructor Certificate and the Highway Professional Class 1 Constructor Certificate, although the Second Construction Certificate is still valid. But since you have to register in a unit. Therefore, when your unit only has highway construction qualifications but does not have municipal qualifications, your municipal second construction certificate will also not be able to be registered, which is equivalent to losing its utility.

Therefore, after obtaining the second-level construction engineer certificate, whether to choose to take the second construction additional item or directly win the first construction should be determined according to your own needs and professional direction. If you want to improve your abilities and use them to take on higher positions, a certificate can certainly play a greater role. However, no matter how you choose, you still have to pass the test first.

Yes, you have to log out of the second level first.

In order to register for a first-class certificate.

For details, please consult the local construction committee.

If the builder cancels the cancellation, it needs the cooperation of the enterprise, and the personnel of the jujube code enterprise can be cancelled, and the unit does not agree to solve it only through legal means, and can go to the Construction Department and the Ministry of Labor to solve it.

Log in to the housing and urban and rural personal system, click to cancel the unit, and submit the unit for confirmation.