How to turn off the anti mistouch mode on Huawei mobile phones

1. Open the mobile phone page, find the "Settings icon" on the mobile phone page, and click to enter.

2. After entering the settings, select "Smart Assist" in the options and click to open the interface.

3. There is an "anti-mistouch mode" inside.

and click the close button to the right of it.

Extended Information: Anti-Touch Mode.

First, functional characteristics.

Every smartphone has an anti-mistouch function, for example, when we make a call**, as long as we hold the phone close to our face, the phone screen will automatically turn off and turn off the touch function.

And when the phone leaves the face, touch the screen.

Then turn on the touch and display function, this function, naturally there is a need for energy saving, but more importantly, it is more important to avoid the face touching the touch screen when calling, which will cause misoperation.

Second, the working principle.

In fact, it is not complicated to implement this function, relying on the proximity sensor set above the mobile phone, the emitting part of this sensor will emit pulsed light, when there is no obstacle in the near distance, the light will not be reflected, therefore, the receiving part has no signal, and the mobile phone touch screen works normally.

But when the phone is close to the face and other objects, the transmitter.

The emitted light will be reflected, so that the receiving part will receive the light signal, and the phone will determine that there is an object approaching in front of it, and in order to avoid affecting the call, the phone will turn off the touch and display.

However, most phones' anti-mistouch is limited to phone calls, and when you put your phone in your pocket, the sensitive touchscreen can be triggered by squeezing and rubbing against clothing. In response to this situation, many mobile phones have also added an anti-mistrigger mode.

The principle is that when the mobile phone screen lights up due to a false touch, the proximity sensor will immediately detect the surrounding environment, if it finds that there are objects around, the proximity sensor will think that the mobile phone is still in the pocket, and will turn off the screen and touch again, thereby minimizing the probability of false triggering.

3. Frequently Asked Questions.

Sometimes, due to the failure of the sensor hardware equipment, the anti-mistouch function cannot be used, and it needs to be solved step by step.

1. First of all, see if the film covers the vicinity of the earpiece, if not, you can clean up the dirt near the earpiece. Double-clicking the volume button can also turn off the anti-mistouch function, but only temporarily.

2. Most of the prompts that appear are because there is a problem with the induction, if you hit **, the screen will be black.

Unable to wake up afterwards. Then there must be a problem with the sensing device, and the general mobile phone can turn off the anti-mistouch function, which can generally be found in the settings.

3. If you feel that it is inconvenient to use, you can also return to the factory for repair, after all, the hardware is not worse than the software.

When the anti-mistouch mode is turned on on on Huawei phones, we sometimes want to turn it off again.

When we put the phone in our pocket, the phone will not be misoperated because of our movement, this is because we have turned on the anti-mistouch mode, and then we will teach you how to turn off the anti-mistouch mode in Huawei mobile phones.

The details are as follows:1First of all, we turn on the phone and enter the desktop, then find the settings icon and click to open.

2.Next, we will enter the settings screen of the phone.

3.Then we find the Smart Assist option in the settings interface and click on it.

4.Next, we will enter the interface of the intelligent assistance.

5.Then we can find the anti-touch mode option in the smart assist interface, and then we just need to click on the switch on the right side of the option to turn off this function.

6.If we want to restart this function, we just need to go to the Smart Assist interface. Find the Anti-Touch Mode option and tap the switch on the right.

The above is how to turn off the anti-accidental touch mode in Huawei phones.

As one of Huawei's three core businesses, Huawei's consumer business began at the end of 2003 and has set up 16 R&D centers in China, Russia, Germany, Sweden, India, and the United States. In 2015, Huawei was selected as one of the top 100 most valuable brands in the world by Brand Z, ranking 16th among brands in the technology field.

Click Settings, enter the settings interface, and click Smart Assist.

You have entered the Smart Assist interface, click Turn off the Anti-Touch Mode icon is black and white, and then turn off the Anti-Touch Mode.

You can turn the Tamper Mode switch on or off by going to Settings > Accessibility.

Huawei anti-mistouch mode is turned off, taking Huawei Mate20 as an exampleThe user needs to enter the mobile phone settings, click the smart assistance button, find the anti-mistouch mode after entering, click to enter, and turn off the switch. The steps are as follows.

1. Turn on your Huawei phone and touch the Settings icon. This is shown in the figure below.

2. Enter the main interface of settings and click Smart Assist. This is shown in the figure below.

3. Enter the intelligent assistance interface, find the anti-mistouch mode, and the status is on. This is shown in the figure below.

4. Finally, turn off the switch behind it. This is shown in the figure below.

Notes:If you need to turn it off, follow the steps above.

The anti-mistouch mode is to prevent misoperation of the phone due to squeezing or sliding in the pocketIf you need to close it, perform the following steps:

EMUI and above: Settings > Intelligent Assist > Anti-Mistouch Mode, which can be turned on or off.

The following describes how to turn off the Huawei Anti-Mistouch Mode:Tool: mate30

Operating system: EMUI

The first step, taking mate30 as an example, find the "Settings" of the mobile phone's desktop, and then click on it, as shown in the figure below.

The second step is to enter the settings interface, as shown in the figure below, there are many categories that can be set.

Step 3: Swipe up on the screen with your phone until you see "Smart Assist", as shown in the figure below.

Step 4: Click "Smart Assist", as shown in the figure below.

Step 5: Enter the intelligent assistance interface, and slide the small white dot behind the "anti-mistouch mode" to the right to make it blue, as shown in the figure below.

Sixth, if you want to turn off this mode, slide the small white dot to the left and make it gray.

Setting: Only the second-to-last in the secondary can be set up.

1. First turn on the Huawei Honor 30 and open the settings in the Huawei EMUI system, as shown in the figure below.

2. Then turn on the Huawei phone.

On the Settings page, scroll down and click Accessibility, as shown in the following figure.

3. After entering the auxiliary function, click to turn off the anti-mistouch mode, as shown in the figure below.

4. At this time, after clicking Close, the anti-mistouch mode of the Huawei phone will be turned off, as shown in the figure below.

Take the Huawei P40 phone as an example:

Go to Settings > Accessibility and turn off the anti-touch mode switch.

The following describes how to disable the Huawei Anti-Mistouch Mode:Tool Ingredients: Huawei mobile phone Honor Play4T Pro, Android version 9.

1. Click [Settings] on the desktop, as shown in the figure below.

2. Click [Smart Assist], as shown in the figure below.

3. Click the switch on the right side of "Anti-Mistouch Mode".

Note: The switch shows "blue", which means it is on; The switch shows "gray" to indicate that it is off, as shown in the image below.

4. The "Anti-Mistouch Mode" is turned off and the setting is completed, as shown in the figure below.

You can turn off the anti-touch mode switch by going to Settings > Accessibility.

The following describes how to disable the Huawei Anti-Mistouch Mode:Tool Ingredients: Huawei mobile phone Honor Play4T Pro, Android version 9.

1. Click [Settings] on the desktop at one o'clock, as shown in the figure below.

2. Click [Intelligent Assistance] vertically, as shown in the figure below.

3. Click the switch on the right side of "Anti-Mistouch Mode".

Note Liang Qiyi: The switch shows "blue", which means it is on; The switch shows "gray" to indicate that it is off, as shown in the image below.

4. The "Anti-Mistouch Mode" is turned off and the setting is completed, as shown in the figure below.

Hello, it can be closed by following these steps:

The first step is to open the tool.

The second step is to find the auxiliary assistant.

Step 3: Click on the assistant assistant to find the anti-touch mode, and click to turn it off.