What are the differences and advantages and disadvantages between integrated stoves and split stoves

Integrated cooktopThe advantage is that after the installation of the integrated stove, there is no need to purchase other kitchen appliances, which can better save kitchen space, save space, have a good effect of extracting fumes, and save energy, low consumption and environmental protection; The disadvantage is that it is more expensive than the body stove, the style is relatively single, and there is less room for choice, which will not match some styles.

2. Split foci:The advantage is that the split stove is that because there is only a stove, it will be relatively cheaper; The disadvantage is that the style is old, takes up space, and the placement is not beautiful.

The width of the integrated stove is between 550-1050mm, and the integrated stove is called the "integrated" stove, and its floor space is simply commensurate with the width, eliminating the space occupation of other kitchen appliances.

Due to the characteristics of split stoves, it is necessary to purchase other kitchen appliances, such as disinfection cabinets, steam ovens, etc., so the space occupied is relatively higher than that of integrated stoves; The integrated stove will automatically cut off the gas source when the ignition is turned off, automatically cut off the power supply when the leakage is over, automatically detect whether there is gas leakage, detect the voltage and current overload, and have the function of timing reminder, etc., which can play a role in safety protection during use, and the safety guarantee factor is higher than that of the split stove.

Advantages of integrated stoves.

The integrated stove perfectly integrates the functions of range hood, gas stove, disinfection cabinet, storage cabinet, microcrystalline stove, induction cooker, etc., with a unique combination and high-efficiency range smoke effect, to maximize the use efficiency of various functions, fully automated intelligent control, and truly realize the requirements of people's pursuit of green and environmentally friendly high-end kitchen appliances. When buying an integrated stove, it is necessary to check whether the material is good or bad, so as to ensure the later use. At present, the commonly used integrated stove is made of tempered glass, and the exterior is made of stainless steel, which brings good quality.

However, when purchasing, you need to ask about its fire performance, which is safer to use.

If you have an idea of understanding this, you can pay attention to Zhejiang Banchuan Electric Appliances****. The company's headquarters covers an area of about 52,000 square meters, and now has a total factory and sub-factories, with an annual production capacity of up to 400,000 units, and is known as an aircraft carrier in the safe and healthy kitchen appliance industry. There are more than 1,600 sales outlets across the country, all provinces, municipalities and autonomous regions across the country, and more than 5,000 employees in Banchuan have reached the national level.

Advantages: integrated design, low noise, high smoke rate, space-saving, simple operation.

Disadvantages: **High, troublesome installation, inconvenient maintenance.

To see if there are any of the following features and benefits:

1. Whether it is convenient for maintenance and cleaning, or can reduce the cleaning process.

2. Whether the internal structure is scientific and advanced.

3. It is necessary to save energy, high thermal efficiency, power saving, environmental protection and practicality.

4. It should be well-made, durable, beautiful and fashionable.

Ultra-high smoke extraction rate:The smoke absorption rate of the integrated stove is more than 95%, and the innovative use of micro-aerodynamic principles to isolate the pollution source and the external environment in both directions, which can effectively eliminate the smoke and vapor before the diffusion without affecting the operation line of sight and without passing through the human breathing pathway, and even the fried peppers can not smell a little scorching, giving you a neat and clean kitchen environment.

The traditional kitchen equipment fume space circulation distance is long, the fume diffusion is serious, in the rising process a large part of the diffusion into the room, into fume and heat, resulting in the kitchen walls and items are full of grease, the kitchen sanitation work has become a cumbersome task, the kitchen temperature rises, into the kitchen can not become a kind of enjoyment.

1. Integrated stove.

1. Advantages: innovative design, ultra-high smoke absorption rate, truly low noise, saving space and resources, health and pollution-free, and safety performance upgrade.

2. Disadvantages: **high, the brand is messy, and there are limitations with the cabinet.

2. Split foci.

1. Advantages: Cheap and varied.

2. Disadvantages: the style is outdated, takes up space, and the placement is not beautiful.

For small families, integrated stoves are relatively more suitable, and they are more cost-effective. To buy an integrated stove, you must choose a big brand, reliable, and you need to pay attention to it:

What to pay attention to when asking?

Please reply if you receive it, thank you.

Question: What do I need to pay attention to?

Answer 1, the logo, including two aspects - the logo and instruction manual of the integrated environmental protection stove. The model, manufacturer or distributor's name, trademark, rated voltage, rated input power, and certification mark should be marked on the integrated environmental protection stove. At the same time, each integrated eco-friendly stove comes with a Chinese instruction manual to help consumers use it safely.

In the instruction manual, it should be marked with the distance of the supporting surface of the cooking utensils with the integrated eco-friendly stove.

2. Structure, the structure design of the integrated environmental protection stove should take into account that it is easy to effectively remove the accumulated grease and dirt, and the surface of the shell should be smooth and flat as much as possible. Generally, the integrated environmental protection stove needs to be used in conjunction with the kitchen cabinet, taking into account the external elements such as the cabinet style, and also considering the integration of the environmental protection stove and the kitchen gas, electricity, etc.

3. Test the smoke absorption rate, test the smoke absorption effect when purchasing, and test the smoke absorption effect way: turn on the fan, heat the empty pot as much as possible (about 1 5), pour half a cup of water, and then the smoke rushes upwards to see which integrated environmental protection stove will suck the smoke more cleanly, and the cleaner the sucking, the better.

Which option can be compared with the split integrated stove and the range hood?

Advantages of integrated stoves.

1 Space-saving.

2. The effect of oil smoke is good.

3. Integrated and innovative design.

4. No bumps, no dripping, no oil leakage, ultra-high smoke extraction rate.

5. Truly achieve low noise and modern control system.

6. Health and pollution-free, safety performance upgrade.

Disadvantages: 1 It is not harmonious with the cabinet, and the front panel of the integrated stove makes the door panel of the cabinet different in color;

2. The disinfection cabinet, control circuit and switch are too close to the stove, and the temperature is too high during operation to accelerate the aging speed of the power supply device;

3. The third disadvantage of the integrated stove is that it is much more difficult to maintain than the traditional three-piece set;

4. Too heavy, difficult to handle and install, difficult to high;

5 At present, most of the smoke pipes of the integrated stoves sold on the market are at the bottom, and after a long time, they will become sewers, and if they are not good, they will be flooded with oil, and they will be everywhere under the cabinets, and there is no way to deal with them. At the same time, it also greatly increases the fire hazard;

6. It is very troublesome to disassemble and wash the air wheel, and the cabinet must be moved out of the integrated stove and disassembled from the back to complete the cleaning.

Advantages of split stoves:

1 Compared with the traditional integrated stove, it is more humane.

2 ** is not high, and can compete with traditional stoves. Compared with the integrated stove, the cost performance is higher, and the middle and high-level consumers can accept it, while maintaining the profit margin of the dealer.

3. Adopt the concept of integration, split design, compared with the integrated stove, the structure is simple, scientific, easy to install and maintain, the novice installation time can be installed as long as it does not exceed half an hour, and the disassembly machine can be removed as long as it does not exceed ten minutes. One person can do it.

4. Fully integrated into the overall cabinet, the surface looks like a built-in installation, strong integration.

5 The collocation is more beautiful.

6 Easier installation.

7 Faster repairs.

8 It is more power-saving when using.

9 Low volume, low noise.

10 Fashionable.

Disadvantages: 1. The disinfection cabinet, control circuit and switch are too close to the cooker, and the temperature is too high during operation to accelerate the aging speed of the power supply device;

2. Too heavy, handling and installation, difficult to high;

3 At present, most of the smoke pipes of the integrated stove sold on the market are at the bottom, and after a long time, they will become sewers, and if they are not good, they will be flooded with oil, and they will be everywhere under the cabinets, and there is no way to deal with them. At the same time, it also greatly increases the fire hazard;

4. It is very troublesome to disassemble and wash the air wheel, and you must move the cabinet out of the integrated stove and disassemble it from the back to complete the cleaning.

1. Integrated stove.

Advantages of integrated stoves:

Space: Compared with traditional range hoods, the integrated stove is more space-saving, mainly because the integration effect is better, so the floor space is much smaller. Take the current sales and reputation on the market are good CMAC integrated stove products, CMAC integrated stove is a gas stove, steam oven, disinfection cabinet, smoke hood and other kitchen appliances in one, is really a multi-purpose, both beautiful and space-saving.

Noise: The integrated stove is known for its zero noise, compared with the traditional range hood, the integrated stove has made a more innovative and professional noise reduction treatment, ultra-low noise technology and silent air duct have laid the foundation for the "quiet" characteristics of the integrated stove.

Smoke extraction effect: Regarding the smoke extraction effect of the integrated stove, I believe this is also the point that everyone is most concerned about, because the smoke will not only affect the cleanliness and hygiene of the kitchen, but also affect people's health. When we buy kitchen range hood equipment, the effect of range smoke has become our most important thing.

Disadvantages of integrated stoves:

Because the integrated stove has so many functions, it also determines its cost, which is more expensive.

The style of the integrated stove is relatively simple, and there is less room for choice, which will not match some styles and look less beautiful.

2. Split foci.

1.Advantages: Cheap, variety.

2.Disadvantages: the style is old, takes up space, and the placement is not beautiful.

First, the design style is different.

The integrated stove is an integrated mode, and the most common one on the market is the combination of smoke stove steaming or smoke stove elimination. Of course, there are also lockers, ovens or steam ovens. The choice depends on the needs of each family.

Split stoves are generally range hoods with gas stoves, steamers, ovens, lockers, etc. are purchased separately, and they are not necessarily installed under the stove when installed. In terms of overall feeling, split stoves are slightly inferior to integrated stoves.

Second, the space utilization rate is different.

An integrated stove of about 1 meter integrates the functions of multiple kitchen appliances. And it adopts the mode of side suction and lower row, there is no upper motor occupancy, and this area can be made into a cabinet for storage. If it is equipped with a disinfection cabinet, in addition to sterilization and disinfection, you can also put unused dishes and chopsticks in the disinfection cabinet as storage.

In this way, the countertop will be more tidy and the overall space utilization will be greatly improved.

Three, ** different.

The price of a set of high-end smoke stove integrated stove is about 8,000 yuan, and a set of traditional split smoke stove is about the same price. However, the traditional split stove needs to be a storage cabinet below the entire countertop, and the overall cost of the countertop and countertop is about 3,000 yuan. And because the integrated stove is clean, it can be made into an open kitchen, so that even the cost of partition is saved.

Fourth, the difficulty of cleaning is different.

The average smoke absorption rate of the integrated stove is more than 95%, and some machines can even reach it. There are semi-integrated modes for split stoves, as well as modes for traditional range hoods and gas stoves. The traditional range hood has a fume absorption rate of about 70%, and the kitchen is more greasy after cooking, so it is much more laborious to take care of than the integrated stove.

In fact, there are differences between integrated stoves and split stoves, as well as appearance, practical functions, core technologies, etc.

Difference: The structure is not the same as the laughing mold wheel, the integrated stove will not take up too much space, the split stove will take up more space, and the integrated stove will be more expensive. 2. Advantages of the code-hidden integrated stove:

Space-saving, safe and pollution-free. 3. Disadvantages of integrated stove: high, too many brands.

4. Advantages of split stove: cheap and varied. 5. Disadvantages of touching the letter split stove:

Occupies space and is not aesthetically pleasing.

The big disadvantage of Youyou Zen:

1. Advantages of integrated stove. The most obvious feature of the integrated stove is that it saves space, and there is no environmental pollution, and it is relatively safe to use.

2. Disadvantages of integrated stove. There are too many brands of integrated stoves on the market, and it is easy to choose the poor quality, Shenzhi and relatively high cost when choosing.

3. Advantages of split stove. Split stoves are more popular in the market, and there are many types, and the cost is lower than that of integrated stoves.

4. Disadvantages of split stoves. The split stove needs to be installed separately, which takes up a large amount of kitchen space and has relatively poor aesthetics.

Difference between integrated and split foci:

1. The structure is different.

In terms of structure, the split stove is generally a traditional smoke machine stove, which is only used for smoke absorption and ignition, without a functional cabinet below, and needs to be equipped with other household appliances such as disinfection cabinets, steamers, ovens, etc.

The integrated stove is a kind of kitchen appliance that integrates various functions such as range hood, stove, disinfection cabinet, steam oven, etc., which has the advantages of space saving, good range smoke effect, energy saving, low consumption and environmental protection. From the perspective of function and structure, the function of the integrated stove is richer and more practical than that of the body stove; And the structural module of the integrated stove is more complex.

2. The way of oil smoke suction and exhaust is different.

Although the installation is simple and the popularity rate is high, the smoke is easy to overflow because the smoking outlet is always far away from the smoke source.

The integrated stove adopts the side suction and exhaust method, not only the tuyere is very close to the smoke source, generally about 15-25cm ** smoke control distance, and can be through the strong air volume and smoke separation system, the smoke is effectively discharged, the smoke absorption rate is more than 99%, and the smoke absorption rate of high-quality brand integrated stoves such as Jindi integrated stove can be reached.

3. Space utilization.

With the same 1 square meter space, the split stove may only be limited to simple smoke absorption and ignition functions, and can also be supplemented by other household appliances such as disinfection cabinets and steam ovens to increase its space utilization. The integrated stove can not only integrate the smoke machine, stove and disinfection cabinet in 1 square meter space, but also the functions that can be achieved are richer than the body stove if it is an integrated stove for steam ovens, integrated stoves for steaming and grilling, and double-cavity integrated stoves.

Advantages of integrated and split foci:

Although the split stove is not rich in functions, the market and technology are relatively mature, and it is also very versatile with various kitchen decoration styles. The integrated stove also has a mature market and technology, and now it has also implanted many intelligent technologies, which is more intelligent than the body stove; Coupled with the strong smoke absorption capacity of the integrated stove, it is very suitable for open kitchens or families who prefer Chinese cooking.

Disadvantages of integrated and split foci:

The working stability and smoking volume of the split integrated stove are not as good as the integrated one, and the noise will be relatively large. The integrated structure is destined to reserve a good place during the decoration, and if the old kitchen wants to be installed, the original countertop needs to be cut and renovated.