What are the ways to renovate an old wardrobe and which one is more cost effective

1. Painting and refurbishment.

The method of painting and refurbishment is still very practical, and I personally prefer the renovation of primary colors. Of course, if the color of the old wardrobe is older, you need to cover it with a darker color. The old wardrobe may have dirty shoe areas, and if they can't be scrubbed, they need to be sanded and painted.

However, when doing this kind of thing, you still need to ask the landlord for permission. Otherwise, when you check out, it's terrible. Especially the landlord is not easy to talk to.

If you can polish it, it looks good directly with varnish. But this also involves sanding tools and paint, as well as manual labor.

It's probably cheaper than buying a second-hand wardrobe, so it's up to your landlord to see if it's worth it. People who buy second-hand houses can consider doing this. Or you want to renovate your old wardrobe and rent it out.

This method is only suitable for the situation that the wardrobe is solid wood, and the wardrobe of many houses is composite board and compression board and the like, after all, this is cheap. This material cannot be sanded, so it is recommended to renovate it with a second sticker.

2. Sticker refurbishment.

This is the way that many tenants choose, and it is still relatively simple and convenient. The main thing is that cheap wallpapers are ugly, and beautiful ones are a little more expensive. The wardrobe is pasted with that kind of wood grain wallpaper is very beautiful, and a man who used to live next door was pasted like this.

It's still very good-looking, and the cost is about dozens of dollars. It's still much cheaper than buying a second-hand wardrobe or a new wardrobe, and if you check out, you can just take a hair dryer and turn it to hot air, blow it and tear it off.

You can buy the kind of wallpaper sticker with its own glue, but you have to have a little skill to stick it slowly, and you can't get into the air, otherwise it will blister.

1. Painting and refurbishment.

2. Sticker refurbishment.

1. Before the wardrobe renovation, the old wardrobe must be prepared first, and the stickers should also be prepared, if the surface of the wardrobe is already painted, it is necessary to remove all the paint, and you must be careful when removing it, and try not to scratch the surface layer of the furniture.

2. Pay attention to the cleaning work before turning over the object. Especially after the paint on the cover leaky bridge has been removed, the furniture is cleaned with water, and then the excess moisture and dust are wiped off with a dry rag after natural drying.

3. In fact, furniture renovation stickers are a very easy task, in addition to the preliminary work must be done first, but also pay attention to the choice of stickers must also be consistent with the style of furniture, so as to enhance the overall sense of harmony.

How to care for your wardrobe? 1. Clean the cabinet door frequently, and pay attention to the fact that there can be no debris and dust in the track. When cleaning, you can use a semi-wet rag to wipe the cabinet body and cabinet door, and do not use corrosive detergents.

The dust of the track can be cleaned with a vacuum cleaner or a small brush, and the metal parts such as cabinet racks and pull rods can be wiped with a dry cloth.

2. Heavy objects and sharp objects should be prevented from smashing the track and scratching the cabinet and door panel. The edge of the cabinet should not touch water and other liquid solvents to prevent the edge from falling off.

3. Let the wardrobe ventilate, or use dehumidifier regularly to avoid moisture and bacteria in the cabinet and clothes. Use less chemical fragrances to remove odors from your wardrobe, as they have the potential to cause damage to your wardrobe.

4. When the air or weather in the room is too humid, regularly open the doors and windows for ventilation and place small packets of dry lime or other desiccant in the corner of the wardrobe to prevent mold and deformation of the cabinet and door panel.

5. The wooden wardrobe can be wiped with a clean rag, if it is dirty, you can use soapy water or neutral detergent to wipe it with a damp cloth.

6. When using the sliding door, be sure to see whether the handle is protruding, and if there is a protrusion, deal with it in time to avoid greater losses.

Prepare materials: adhesive tape, various paints, brushes, brushes, electric fans.

2. After gluing, apply a layer of white paint first (the color can be freely selected according to preference).

3. After the white background is painted, dry it with a fan.

4. After blow-drying, apply a layer of light blue paint, and then paint the pattern you like.

5. Done. <>

Refurbishment of wall-embedded wardrobes should be carried out depending on the wear and tear. The following is an introduction to several common wear and tear situations and solutions for embedded wall wardrobes. First:

The original fireproof board is warped. In this case, the original fireproof board can be removed and the new fireproof board can be re-pasted. Second:

The original Polaroid plate is warped. In this case, the process of shoveling first and then re-pasting is also adopted. Third:

The original plywood surface became old. Revarnish can be repainted, which is cheap but not effective; Or brush white hand sweep paint, the effect is very good, but **slightly expensive. Fourth:

The original veneer is getting old. In this case, it can generally only be re-sanded and painted with the same type of paint as before, but the effect is not very obvious.

Wooden furniture can easily lose its luster if it is not maintained regularly. Dusting furniture is the most basic care work. Use a soft cloth dipped in some spray (Bilizo) along the grain of the wood to dust the furniture, but do not wipe it with a dry cloth to avoid scratching the flowers.

Daily protection is also very important, as much as possible with a mat under the hot plate to prevent the soup stock from spilling, staining or damaging the tabletop. Try to avoid exposing furniture surfaces to corrosive liquids, alcohol, nail polish, and lacquer removers. When solid wood furniture is used in a drier environment, artificial humidification measures are more necessary.

For example, wipe the furniture regularly with a soft cloth dipped in water. And every six months to a year, the furniture should be waxed regularly.

It is best to wax furniture with paste-like wax, and the old wax should be wiped off with mild, non-alkaline soapy water before waxing. When furniture is scratched or needs to be repaired, the easiest remedy is to use a cotton ball or paintbrush to apply shoe polish of similar color to the surface of the furniture; If you remove the water stains on the surface of the furniture, you should spread clean absorbent paper on the water traces, press it on it with a heating iron, and you can also use salad oil and toothpaste to apply, and then wipe it dry and wax; To remove white marks, the best way is to apply a cloth dipped in soot mixed with lemon juice or salad oil, dry and wax.

1. The first trick: paint renovation.

It can be said that this is the most commonly used renovation method, and there are primary color renovation, color addition renovation, and color change refurbishment in the painting.

Primary color wax talk silver renovation: The surface of the wardrobe has been brushed with blending paint, but the color is not good-looking, and the primary color needs to be renovated. According to the age of the wardrobe to decide whether it needs to be doxxed, if not, as long as the oily stain is wiped with soapy water or gasoline, otherwise, it needs to be thoroughly sanded before repainting the original color.

Color renovation: The color luster on the outside of the wardrobe has become old and not bright after the tempering of time, so we can deepen the color directly on the basis of the original paint color, and then apply varnish to protect it.

Color change and renovation: The color of the wardrobe has been empty for too long, and I want to change the color. This process is more complicated, and it has to go through grease removal, oil putty, sandpaper sanding, oil color, varnish brushing, etc.

2. The second trick: paste wallpaper renovation.

Compared to painting and refurbishing, this method is much simpler. Go directly to the Internet to find your favorite PVC stickers, stick them on the surface of the wardrobe, and use a hair dryer to blow them off when you don't want them. If you choose to paste wallpaper, you have to consider glue, offset printing, discoloration and other issues.