Can I flash the iPhone6home button after changing the motherboard and not changing it?

Can be flashed. The steps to flash the machine are as follows;

Connect iTunes, turn off your iPhone, press and hold the Home button and the Power Off button at the same time for 10 seconds, release the Power Off button, continue to press and hold the Home button until you see the device recognized in DFU state on the computer, after the computer prompts, release the Home button, select the recovery option button on iTunes, and click Confirm Recovery in the pop-up selection box.

3.Next, iTunes will pop up a page prompting that everything will be erased, and it will also verify the recovery with Apple servers, when the verification and extraction of files are completed, iTunes will automatically reinstall the **good firmware version for the iPhone, wait for the installation to be successful, and then reinsert the mobile phone card to activate the iPhone online.

2. Put your phone into recovery mode

1. Press and hold the power button first, and when the shutdown option appears, please slide to power off;

2. Then press the power button to turn on the computer, the Apple logo will appear on the screen, do not release the power button;

3. Then press and hold the home button on the home screen until the screen goes black.

4. When the screen is black, please release the power button and continue to press and hold the home button on the home screen until iTunes on the computer side shows "An iPhone in recovery mode has been detected";

Note: If you can't enter the recovery mode, please do it several times.

You don't need to change the motherboard, if the home button is broken, it may just be the induction version that is broken, and then you can just change the home button.

Steps to replace the home button.

1. Use a pentagonal screwdriver to remove the two screws on the bottom end of the phone.

2. Gently separate the screen from the host with a tray.

3. Remove the home button and replace it with a new home button 4, and then install it back according to the steps of the original disassembly.

It depends on how bad you are, if it is a problem with the elasticity of pressing, you can change the shrapnel alone. If the cable is broken, it seems that the line can be rescued.

If it is determined that the damage is not caused by man-made, the results of the general after-sales appraisal of the general after-sales service of Apple, during the warranty period, are completely free of charge.

Changing the motherboard can unlock the ID.

About ID Lock:

1. The information of the ID lock is unloaded from the flash memory and baseband, and the ID lock can be released by replacing the flash memory and baseband.

The iphone6home button is not man-made damage, whether it is replaced free of charge, depends on whether it is under warranty.

1. During the 1-year warranty period, whether it is a home button problem or a touch ID problem, once the non-man-made damage is detected, Apple will generously replace the official machine or repair it, according to the current situation, it is more common to replace the machine directly.

2. During the 1-year warranty period, the official machine has been replaced once, whether it is the home button problem or the Touch ID problem, due to the introduction of Apple's new warranty policy, it is very likely to become repairable as much as possible, and the warranty period will not be recalculated.

3. After the warranty period, you can only pay for it yourself.

No, assistive touch can be used

Assistive Touch, commonly known as the little white dot, was originally designed for people with disabilities and accidental damage to mobile phone keys. When you turn on Assistive Touch, a small square will appear on the screen and you will see it when you click on it.

It allows you to perform all operations on the home button and some on the lock screen button (note: it is not possible to restart with assistive touch, as it cannot be used in the shutdown state).

Assistive Touch is Apple's built-in (iOS 5 or above) software that provides users with quick and easy operations. When this feature is turned on, a small square will appear on the interface of the iPhone iPod touch, and clicking on it will bring up four function menus. This small square can be moved freely in eight positions around the screen as different programs are turned on and off, avoiding "getting in the way", and can also be adjusted manually.

No, you cannot.

1. If you return to the factory, you will change the machine for a new machine, and the official will change the machine.

Probably retouched.

2. You can ask the maintenance personnel, if your mobile phone was damaged under non-human factors before and the motherboard was replaced by Apple after-sales service, then with the warranty period, you can also repair it again for free.

3. If your phone was replaced with a motherboard in a personal repair shop, then your Apple phone will not have warranty benefits, so you can't return it to the factory for a new one.