My computer stereo is the loudest, why is it still not too loud

Clever trick to solve the problem that the computer has no sound:

1. Check whether the sound card, cable, speaker and other equipment are connected normally;

2. Right-click "My Computer" -- Properties -- Hardware -- Device Manager, and open "Sound, ** and Game Controller" to see if there is any yellow in front of you? "Or"! "If so, reinstalling the driver for this device will solve the problem;

4. When there is no sound and no speaker, open the control panel--- Add and remove programs--- add and delete Windows components, put a check mark in front of "Accessories and Tools", click "Next", and then, shut down and restart, the system will prompt you to install new hardware, follow the prompts to install;

5. Uninstall the sound card driver, reinstall or upgrade the audio driver;

6. When the sound card driver is installed, the prompt "AC chip cannot be found" appears, it may be that the computer is poisoned, or the sound card driver has been deleted by mistake due to illegal operation, or there is an internal software conflict. The solution is to reinstall the system and drivers.

7. Simply ignore it, wait for a period of time after shutting down and then turn it back on, sometimes the sound problem will solve itself. You might as well give it a try!

No sound issues with the computer:

First, first confirm that the hardware is fine. If the speaker is fine, the sound card is fine, and if you've tested it on other machines and it's really good, then you can read on.

2. Make sure all the cables are exactly right. Then power on the speaker and turn on the volume switch.

3. Install the driver of the sound card correctly, if it is an onboard sound card, it is best to install the driver provided on the driver disk of the motherboard.

In fact, the computer does not make a sound, and many times it is because the sound card is not driven correctly. In general, after the sound card driver is installed, there will be a small speaker icon in the taskbar in the lower right corner. ）

Fourth, if you are sure that the driver is installed correctly, then take a look at the volume settings in the computer.

The specific method is to double-click the speaker icon in the taskbar, and check whether the volume is turned off to the minimum in the "Volume Control" and "Waveform" dialog box in the pop-up "Volume Control" and "Waveform".

If these two options are not available in the dialog box, click on the "Options" menu - select "Properties" - select "Volume Control" and "Waveform" in the "Show Volume Controls" and then set them correctly.

Note: Step 4 can only be set up after the driver for the sound card has been installed correctly.