The reason why the water heater trips, what is the reason why the water heater keeps tripping

The reasons for the gas water heater to start tripping may be the following:

This kind of water heater is the power supply conversion low-voltage supply computer board and pulse igniter, etc., if the whole machine has leakage such as: power transformer, computer board, strong exhaust fan, pulse igniter, etc., will cause the start tripping situation;

The contact part between the power cord and the casing is damaged or damaged by insect bites and leakage;

Serious short circuit of the motor will cause overload and tripping;

Serious short-circuit in the primary of the transformer will also cause overload and overcurrent tripping;

The poor performance of the leakage protection switch itself causes the electrical appliance to trip when it is started.

Solutions for the above situations:

Check and test whether there is leakage in the whole machine, and deal with the leakage parts in time to ensure good insulation;

If the contact between the power cord and the chassis leaks, the entire power cord can be directly replaced;

If the motor is seriously short-circuited, the motor can only be replaced according to the model and specifications of the original machine;

The transformer can be replaced with a transformer of the same type and power for short circuit;

The leakage protection switch has poor performance and timely replacement, which involves personal safety issues and cannot be ignored.

Precautions: When the leakage protection switch trips and cannot be repaired in time, do not work directly over the leakage protection switch, otherwise there will be a risk of electric shock, and serious safety accidents such as death and fire may occur in the heavy.

Electric water heater plug in power tripping] electric water heater trips after working for a period of time, when such a situation occurs, the vast majority of people who touch the leakage protection plug with their hands will be hot, this is because the internal circuit of the water heater has a slight leakage or the leakage protection plug copper sheet has poor mechanical contact, the socket is short-circuited, and the leakage is open and leakage. Check whether there is a short circuit in the internal circuit, and there is leakage of heating elements and other components. In addition, excessive limescale accumulation in the heating element can also occur.

Solution: Remove the heat pipe for cleaning or replacement. The leakage protection plug is permed, and the leakage protection plug is replaced.

Both the water heater and the socket should be grounded.

Electric water heater frequent trip maintenance method].

When the electric water heater is installed, the power socket must be reliably grounded and the rated current of the power socket shall not be less than 16A, and the cross-sectional area of the power supply wire shall reach , which shall be a copper core insulated wire, and the outer skin shall be waterproof and wear-resistant.

When the water heater trips frequently, first detect whether the power socket grounding is reliable, can be detected with a special power detector or detected with a pointer multimeter, the current electric water heater leakage protection switch adopts a three-pole disconnection protection device, when the power supply is in reverse phase, the ground wire is not or the contact is poor, the ground wire, the zero line is live, etc., the leakage protection switch will alarm or trip. It can only be used normally if the power supply is guaranteed to be free of the above faults.

When there is no problem with the power socket of the water heater, but the leakage protection switch is plugged in and tripped, it will be tripped immediately;

Hehe, it seems that you are using an instantaneous water heater with a rated power of 7500W, right?

The safe maximum water temperature set for an instantaneous water heater should be 65 degrees, which means that when you set the gear to the maximum, the outlet water temperature will be 65 degrees.

Generally, the temperature of the bath is 30 to 35 degrees, so that you can adjust the gear to the middle, and the power at this time is around 3500W, according to the winter bath for 20 minutes, it is also a high-power electrical appliance.

The reason for the trip is that the air switch in charge of the toilet socket is too small, and the current suddenly increases when taking a bath, which exceeds the safe range of air opening, and automatically turns on the overload protection, so it trips.

The only way to solve the problem is to change a larger air switch, for the bathroom socket, 32A can be, if you are not at ease, you can also find a property electrician to help change. It's simple.

Safety first.

Tripping, undoubtedly caused by a short circuit in the circuit.

If the plug of the water heater itself is disconnected, it means that there is a short circuit in the circuit of the water heater itself.

If it causes the main switch of the circuit to trip, it contains a short circuit in the plug part.

The circuit of the water heater can be opened to check for leakage or water traces, and the socket connected to the water heater should be checked for problems.

If you can't solve it yourself, find a friend who understands electricity.

Water heater tripsGenerally speaking, there are two main reasons for tripping.

The first type is short circuits. If a similar situation is prone to occur in a humid environment, water heaters are such products. The second type of reason is the load, for a simple example, if the current of the water heater is 20A, and the shell current of the water heater control circuit breaker is only 16A, when connected to the water heater, the line is normal, but it has been obviously overloaded for the circuit breaker controlled by the water heater,..

1. The first reason for the electric water heater to trip is the leakage of the circuit or the electric water heater itself. As long as there is leakage current, and a leakage protection switch is installed at home at the same time, the leakage current at this time will trip as long as it exceeds 30mA of the conventional leakage switch, that is, the rated leakage current of the leakage protection switch. This is also one of the reasons why many household electric water heaters trip.

2. Overload is the second reason that causes the electric water heater to trip when in use. Because the current power of the electric water heater is not very small, if the power of the electric water heater exceeds the rated power that the switch in our home can be responsible for, it will trip. That is to say, for example, the switch on the top of the electric water heater is 20A, and if you choose a 5000W electric water heater at this time, the current of the electric water heater will definitely exceed 20A, then there will be overload tripping at this time.

3. The third reason: the leakage protection plug is in poor contact with the inferior socket, and the malfunction occurs due to overheating.

Solution: Replace the outlet.

4. The fourth reason: the leakage protection plug and the temperature sensitive switch are faulty.

Solution: Replace the temperature sensitive switch or leakage plug.

In the process of using the water heater, you may encounter the situation that the water heater trips suddenly, which makes many friends feel very distressed, in order not to affect the normal use of the water heater, we should immediately solve the problem of the water heater tripping, so what is the reason for the water heater tripping? What should I do if the water heater trips? Let's take a look with me!

Water heaters are prone to short circuits in humid environments, which can lead to tripping; The water heater tripping may be due to the overload of the circuit breaker controlled by the water heater, resulting in the water heater tripping all the time; The water heater trips due to the aging of the water heater circuit; The water heater is tripped due to leakage of the heating pipe; The plug and socket of the water heater leakage protector are not in good contact.

2. What should I do if the water heater trips?

1. If the water heater always trips due to the aging of the wire, you should immediately ask a professional maintenance personnel to replace the aging wire. If the water heater trips due to leakage of the heating pipe, you also need to ask a professional maintenance personnel to replace the heating pipe.

2. Because the water heater trips due to the overload of the circuit breaker controlled by the water heater, because the power of the water heater is too large, it is recommended that you temporarily turn off other electrical appliances or adjust the water heater to a low power gear when using the water heater. If the water heater trips because of poor contact between the plug and socket of the water heater leakage protector, it is recommended to replace the socket directly.

3. After a period of use, the insulation of the heating element may decline, resulting in a very unstable insulation resistance value.

Summary: What is the reason for the tripping of the water heater is introduced here, once the water heater trips, if you don't know how to repair, it is recommended to ask professional maintenance personnel to come to check and repair, so as not to cause secondary damage to the water heater due to self-maintenance.

1. In this case, it may be that some wires of the water heater have been aged, which will cause the water heater to trip. 2. It may also be because there is too much scale accumulated in the heating pipe and it is not cleaned in time, and the water heater will also trip. 3. When the power of the water heater is too large, and the plug-in plate connecting the Yuna water heater is not erected to the rated power, it will also lead to the failure of the water heater tripping.

4. When the voltage is unstable, the water heater is also prone to tripping, so we must first check whether the voltage is stable. X000B Suggested solution: X000B 1. If the water heater wire is aging, it must be professionally repaired, and the water heater needs to be overhauled every year, so as to avoid the problem of wire aging.

X000B 2. When using the water heater, be sure to clean the scale in the hot water pipe regularly. 3. The power of the plug-in board of the water heater must be greater than the power of the water heater, so as not to cause the problem of the water heater tripping, so the plug-in board needs to be replaced in time. 4. When the voltage is unstable, be sure to check the voltage, if it is temporarily unstable, you can not use the water heater first, and then use it after the voltage is stable.

It is also possible to unplug the high-power electrical appliances in the house when not in use, which can also improve the situation of voltage instability.

Water heater tripping is a common malfunction phenomenon that may affect the hot water usage in our homes. There can be many reasons why a water heater can trip, and here are some of the more common ones.

1.Overload: Overload is a very common cause of water heater tripping. When too many appliances are used to change the yard, the load on the grid will increase, and the load on the water heater will also increase, which may cause the water heater to overload and trip.

2.Line short circuit: A line short circuit is a short circuit between wires, which can cause a sudden increase in current and cause the water heater to trip.

3.Circuit failure: A circuit failure is when there is a problem with the water heater circuit, which may be the cause of the water heater tripping.

4.Overheat protection: The overheat protection device of the water heater is equipped with a certain temperature protection value. When the temperature in the water tank rises to the protection value, it will trip, which is to protect the inside of the water heater from being damaged by overheating, and also to protect people's lives.

5.External electrical interference: In order to ensure the normal operation of the water heater, the internal circuit of the water heater is designed as a circuit with high stability. However, in some cases, external electrical disturbances may cause the water heater to malfunction, causing the water heater to trip.

In short, the above are several common reasons for the late judgment of water heater tripping. In order to avoid the occurrence of the water heater tripping, it is recommended that we pay attention to the power when using the water heater, carefully check the circuit line, avoid plugging together without electrical appliances, and clean the water heater in time to ensure the normal operation of the water heater.

If there is a problem with the power supply of the water heater, the power will be insufficient**, which will cause the situation to trip. Problems with the solenoid valve of the water heater can also cause tripping. If there is too much dust on the ignition pin of the water heater, it will cause the ignition to be unobstructed and trip.

Suggested solutions: 1. If it is because of the problem of the water heater power supply, you can check the battery of the water heater to see if it is aging due to long use, and then see if the indicator light can be lit up when the power supply is turned on. If it is not for the power supply, the battery of the water heater should be removed and replaced with another one, and then see if it can operate normally.

2. If there is a problem with the solenoid valve of the water heater, you can listen carefully to the sound of the solenoid valve ignition when ignition, if not, it is because of the solenoid valve problem, in this case, you need to replace a new solenoid valve, but before checking whether there is a problem with the solenoid valve, you need to check that there is no problem with the circuit content, which will also lead to the suction of the solenoid valve. 3. If there is a problem with the ignition porcelain needle, then you need to check whether the ignition porcelain needle has moved, and then see if it is aging, then you can put the ignition porcelain needle in the right position, and wipe the stains on its surface to see if it can be ignited normally and let the water heater heat. 4. If it is because of the problem of the ignition needle, in this case, you can check whether the position of the ignition needle has moved, and then see if there is any aging, at this time, you can put the ignition needle in the correct position, and then wipe the dirt on the surface, and then see if you can make the water heater heat.

1. Reasons for water heater tripping:

1. There is a problem with the power supply of the water heater, which causes the power to be up** and trips;

2. If there is a problem with the solenoid valve, it will also cause tripping;

3. The ignition porcelain needle has accumulated a lot of carbon deposits.

Resulting in poor ignition and tripping;

4. The water-gas linkage equipment inside the water heater is damaged.

Water heater**.

Second, the water heater trip solution:

1. Power supply problem: check whether the battery of the water heater is too old, and check whether the power indicator lights up after the power is turned on. If there is a problem with the power supply, you need to remove the battery of the water heater and replace it with a new battery to see if it can start normally.

2. Solenoid valve failure: Listen carefully to the ignition sound of the solenoid valve during the ignition process, if there is no sound, it means that the electric compass is likely to age, and the solenoid valve needs to be replaced (note: before confirming the quality of the solenoid valve, you need to check whether there is a problem with the circuit, and the circuit is bad will also affect the solenoid valve ignition).

3. Ignition magnetic needle problem: you need to check whether the ignition magnetic needle has moved, and whether it is aging, you can put the ignition magnetic needle right, wipe the stains on its surface, and then judge whether it can be ignited normally.

4. If the water-air linkage equipment is damaged, it is necessary to check the tympanic membrane in the equipment.

Whether it is because of the use of too long, aging, if aging, will cause Weidong switch can not be started, can only be repaired, if can not be repaired, can only be replaced with a new one (note: this operation needs to be checked by professional maintenance personnel, non-professionals must not operate).

The above are the reasons and solutions for the tripping of the water heater, I hope it can help you, thank you!