How much does it cost to repair the iphone6 shutdown button if it is broken

First of all, it should be noted that if it is not due to human reasons, the switch key damage is not required to refer to this experience, and the after-sales replacement must be carried out during the warranty period, so as to avoid other derivative problems in the future.

If the power on and off button is broken, it will affect functions such as "lock screen", "screen photo (screenshot)", "power on" and so on. In particular, the absence of the lock screen and screenshot function greatly affects the normal operation.

Let's talk about how to deal with what to do if the switch is broken.

Deal with the issue of "unable to lock screen".

1. Open "Settings" - General "- Accessibility" - Assistive

touch", will.

When A-Touch is turned on, a small white dot appears on the screen, which is the multi-function auxiliary contact key.

2. Click this white button - "Device" - Lock Screen".

In this way, the situation of not being able to lock the screen can be solved.

Deal with the issue of "unable to take screenshots".

1. Open "Settings" - General "- Accessibility" - Assistive

touch", will.

When A-Touch is turned on, a small white dot appears on the screen, which is the multi-function auxiliary contact key.

So that the situation of not being able to take a screenshot can be solved.

Deal with the "won't turn on" issue.

If the mobile phone switch button is broken, the most feared thing is that the phone is out of battery, so it will fall into the embarrassment of not being able to turn on. But one trick can solve this problem.

1. Fully charge your phone to ensure that the power is enough to turn on, and your phone will not be unable to turn on because of the computer.

2. Unplug the data cable, remember that both ends of the data cable should not be connected to the mobile phone and charger.

3. Connect a section of the data cable to the mobile phone, and press and hold the "home" button, which is the only button on the mobile phone.

4. At this time, don't let go of your hand and keep holding down the home button, and connect the other end of the data cable to the computer, it will show the white apple first and then turn it on. This way your phone will be flushed on.

The situation that it cannot be turned on can be solved.

Dozens of dollars were done last month in [Guangsutong] changed in Huaqiang North Thank you.

According to your description, in this case, in order to understand and solve your problems more specifically, it is recommended that you set up.

The small shop outside is estimated to be about 30.

According to your description, in this case, in order to understand and solve your problems in a more targeted manner, it is recommended that you send the equipment to the nearest service center for testing, and the service center will determine the specific problems, accessories and other hidden faults of the equipment according to the test results, and give specific accessories and maintenance costs**.

Reasons and solutions for mobile phone not turning on:

1. The boot line is abnormal: use an external power supply to supply power to the mobile phone, use the electric meter to detect whether the indication has changed, if there is no change, it is likely that the boot line is broken or the boot button is not in good contact.

2. The power supply circuit of the battery is abnormal: use the external interface to supply power to the mobile phone, see if it returns to normal when it is turned on, if it is normal, it is determined that the power supply circuit of the mobile phone is abnormal.

3. The IC of the mobile phone power supply is abnormal: test the test point of the peripheral circuit of the power supply IC according to the circuit schematic diagram to see whether the test value is normal.

4. The system clock and reset of the mobile phone are abnormal: you can use the dual total oscilloscope to detect the CPU power supply of the mobile phone to check whether the waveform in the reset is correct.

5. Problems with logic circuits: that is, faults in the circuit version of mobile phones, which can generally be solved by repair welding.

6. Software conflict: The installed software does not match the system of the mobile phone, which may also cause the mobile phone to fail to boot, you can connect the mobile phone to the computer to delete the program.

With the Assistive Touch function in the iOS system, you can still shut down without the shutdown button, and the following is a specific setup tutorial.

1. Enter iPhone settings, "General" settings, as shown in the figure below:

2. Then enter the "Accessibility" settings, and then click "Assistive Touch" to turn on the iPhone gesture operation, after enabled, a small dot will appear on the phone screen, as shown in the following figure:

3. Finally, when we click on this small dot, we can see a lot of gesture operation options, including lock screen, rotation, device, volume control, etc. Here we click the "Device" button -- > lock screen -- > and finally press and hold the "lock screen" for about 3 seconds, you will see that there is a "slide to shut down" prompt, we can slide to operate the shutdown, as shown in the figure below:

The above is the introduction of alternative shutdown methods when the iPhone power button is broken, and it only takes three simple steps to turn off the iPhone phone. There is no need for a power button to shut down.

Apple phone shutdown key broken can be solved by the accessibility function:

Go to iPhone settings, select "General" settings;

Go to "Accessibility", click "Assistive Touch" to turn on iPhone gesture operation, after turning it on, a small dot will appear on the phone screen;

Tap on this little dot to see a lot of gestures, including lock screen, rotation, device, volume control, and more. Here we click the "Device" button - > lock screen - > and finally press and hold the "lock screen" for about 3 seconds, you will see that there is a "swipe to shut down" prompt, we can slide to shut down.

How do I connect my iPhone to my computer?

First, connect the cable to your computer.

Then arrange iTunes on the computer.

Once you have iTunes installed, you can connect directly to your computer.

It is also possible to connect with the help of other software, such as mobile phone assistant, 91 assistant, 360 assistant and some other assistants.

1.Charge your phone.

2.Plug one end of the cable into the connector of the phone (remember, the other end of the cable is not connected to the computer first).

3.After the phone is connected to a port with a data cable, we press and hold the home button.

4.After holding down the home button, we then connect the other port of the cable to the computer.

5.Power on

Plug in the data cable at one end and the computer at the other end, just press the home button.