What are the configurations of stone engraving machines? The price of stone engraving machine should

Generally, stone engraving machines are divided into heavy-duty stone engraving machines, medium-sized stone engraving machines, and light-duty stone engraving machines. There are great differences in the configuration of different types of stone machines, and the following points are summarized for you.

1) Bed. The body of the heavy-duty stone machine adopts a square tube seamless welding machine tool and a T-shaped bed, which has a heavy bearing capacity and strong stability. The bed used in the medium-sized stone machine is similar to the T-shaped bed, but it is not as rigid as the heavy-duty one.

The bed of the light stone machine is similar to that of the advertising machine, and it is a little unstable to use.

2) Spindle motor. Heavy-duty and medium-sized general motors are large and do not affect stability, but if a light stone machine uses a large motor, the machine may tremble and be unstable.

3) Drive. The driver used in the high-end engraving machine is also relatively large, generally using Leisai 2278, Jiemeikang 2260, or strictly controlling 2D811, and the other two can use Leisai 860H

4) Guide rail. The guide rail is divided into square rail and round rail, the square rail is imported from Taiwan Shangyin square rail Hiwin or Yintai PM, and the round rail is generally domestic. The square rail has high precision, wear resistance and long life.

5) Transmission mode. The transmission mode is divided into rack and screw, the speed of the rack is fast, and the general large machine will use the rack to drive, because the screw is unstable. Small machines commonly use lead screws, although slower but with high precision.

6) Motor. The motor is divided into stepper motor and Yaskawa servo, the former one is domestic, the latter is imported, and it is expensive. Usually everyone uses stepper motors, which are economical and easy to maintain.

Consult Jinan Xinhongcheng.

Secondly, according to the configuration given by the manufacturer and the selection of several companies with a more reasonable and good impression as the object of the field visit. Field investigation must test the engraving, according to their own processing content let the manufacturer technician make a sample, look at the engraving effect and processing time. If it doesn't work well, then you don't need to move on to the next step.

Even the manufacturer's technician can't make it work, let alone train you to become a master. Furthermore, ask about the after-sales service of the stone engraving machine, how long the warranty is, and what parts are guaranteed; How to solve the machine failure and how long to solve it; In addition to how the machine service is charged after the warranty, the charging standard should be asked. Finally, it is to finalize the CNC engraving machine and **.

The scale and degree of standardization of each manufacturer are different, and of course it will not be the same, so you have to consider it comprehensively. Although you get what you pay for, we also want to buy value for money.

When we buy a stone engraving machine, we must have a certain understanding of the stone engraving machine. In this way, in order to better use, we still need to have a certain way and method when choosing, so as to choose a stone engraving machine that suits you.

I think the stone engraving machine of Xingtuo Machinery is good, our factory is purchased here, and the after-sales service is very satisfied.

I don't know much, this is based on your own economic strength, choose more to compare, and find the right one.

Do you all know about engraving machines? It's really a machine that processes something. Therefore, the application range of engraving machine is very wide, so we need to understand the application range of various engraving machines, but do you all know the best stone engraving machine, and what to pay attention to before the installation of the engraving machine, and then we will introduce it to youStone engraving machineWhat to pay attention to before the installation of the engraving machine, I hope you will refer to it.

One. What you need to know about stone engraving machine.

1.Let's talk about it first, there are also low-end machines, with average configuration and a price of about 40,000.

2.Slightly good, cutting force, stability or something, the price is about 10,000.

3.If it is multi-functional, it can be done both flat and three-dimensional carving, and the price is in the tens of thousands.

Two. What to pay attention to before the installation of the engraving machine.

1.When we install it, we should never install this device in the event of lightning or thunder, never install an electrical outlet in a damp place, and never touch an uninsulated power cord.

2.There are many more, the operator must go through strict training, and must pay attention to personal safety and machine safety during the operation process, so as to operate the computer engraving machine in strict accordance with the operating procedures.

3.Next, the power supply voltage requires 210V-230V, if the power supply voltage is unstable or there are high-power electrical equipment around, but please be sure to choose a regulated power supply under the guidance of professional and technical personnel.

4.In addition, the control cabinet of the engraving machine must be grounded, and the data cable cannot be plugged in with electricity.

5.In fact, the operator should not wear gloves to work, so it is best to wear a protective eye shield.

6.Then, the mechanical body is a steel structure gantry part of the potato fiber rubber aviation aluminum casting, in fact, it is relatively soft, but do not use too much force when installing the screws (especially when installing the engraving motor) to prevent slipping.

7.Finally, the cutter must be installed and clamped to keep the cutter sharp, and the blunt knife will reduce the quality of engraving and overload the motor.

Three. Small engraving machine manufacturers should know.

In fact, the superstar brand in 2003 set a number of side, but at that time there were few micro engraving machine brands, the brand quality in foreign countries was good but too high, and there were domestic products to make do with the highest profit margin but not very focused on quality, if the superstar brand was founded at this time, the pursuit is to pursue quality, but also innovative products, beyond foreign brands, become a star in the industry! The Superstar brand icon is a feature.

When people are carving, they will use the engraving machine, the above article is the stone engraving machine and what to pay attention to before the installation of the engraving machine, ** should not be clear.

There is training for stone engraving machines. Stone engraving machines are generally trained by manufacturers. When the purchase of engraving machine is delivered to the door, the manufacturer arranges a technician to train for a week, which is free of charge.

If the customer feels that he has not learned well in a week, or has not learned enough, the customer can quietly go to the manufacturer to learn for free, without time limit.

Types of stone engraving machines:Stone engraving machine according to the structure of the bed can be divided into light stone engraving machine and heavy stone engraving machine, light stone engraving machine is mainly suitable for light stone slab engraving processing, mainly engraving machine body steel pipe shed welding bed, the overall load-bearing is lower, so to slate processing based friends can choose light stone engraving machine equipment, this engraving machine cost performance is still relatively good.

Heavy-duty stone engraving machine is generally suitable for large-scale stone processing, mostly heavy-duty stone relief-based, or large-scale engineering relief products processing to undertake large-scale projects-based processing enterprises can choose this heavy-duty stone engraving machine.

Detailed explanation of the operation steps of CNC engraving machine:

The operation and use of CNC engraving machine has always been a concern for many prospective customers, because in everyone's impression, fully automated machining, but refined relief engraving effect, this high-precision CNC equipment operation must be difficult. Li accompanied many people, so many people retreated before they understood and learned, afraid that they would not be able to learn. In fact, it is very complicated and cumbersome CNC engraving machine operation, as long as you learn it carefully, it is easy to learn, and there is nothing difficult to learn.

1.Before using the CNC engraving machine, first make sure that all the connections between the machine tool and the computer are normal, and then turn on the power of the machine tool and the power of the computer. After the system is started, enter the ncstudio CNC system.

2.Select after opening the control system"Back to the mechanical origin"Menu. The machine automatically returns to the mechanical origin and corrects the system coordinate system.

In some cases, such as restarting the machine after the last normal shutdown and continuing the last operation, the user does not have to perform a mechanical reset operation. When the NCSt system exits normally, it will save the current coordinate information. Alternatively, if the user confirms that the current location is correct, they can also leave it alone.

3.Before machining, the user generally has to load the required machining program, otherwise, some functions related to automatic machining will be invalid. Select"Open (f)|Open (o)...."menu, the Windows standard file operation dialog box will pop up, from which you can select the drive, path, and file name where you want to open the file.

Click"Open"button and the machining program is loaded into the system.

4.Determine the origin of the workpiece, manually walk the x and y directions of the stone engraving machine to the desired origin position on the workpiece, and select"Sets the current point as the origin of the workpiece"menu, or in the coordinate window, the coordinate value of the current position can be cleared to zero, so that the current position is used as the starting point for machining when the machining program is executed.

Summary. Sculpture knives. It is a clay molding tool, which is used for scraping, cutting, pasting, picking, pressing, plastering clay sculpture and modeling.

It is divided into 3 types: the first is a metal tool, which is made of steel (blue rust prevention), stainless steel, brass, etc., and the cutter head is divided into oblique triangle, willow leaf shape, leaf shape and arrow shape, and some edges are jagged. The second is non-metallic tools, which are made of bamboo, wood, bone, ivory, horn, plastic and other materials.

The large knife shapes include sole shape, cuttlefish bone shape, thumb shape, oblique triangle, etc.; Small cutter shapes include water chestnut, small foot, spherical, bar, etc. The third is the scraper, which can cut the shape and make the clothing pattern, and there are various arc-shaped and square double-sided scrapers.

What equipment do I need to buy for stone carving?

Sculpture knives. It is a clay molding tool, which is used for scraping, cutting, pasting, picking, pressing, plastering clay sculpture and modeling. It is divided into 3 types:

The first is a metal tool, which is made of steel (blue and rust-proof), stainless steel, brass, etc., and the blade is divided into oblique triangle, willow leaf, leaf and arrow, and some edges are serrate. The second is non-metallic tools, which are made of bamboo, wood, bone, ivory, horn, plastic and other materials. The large knife shapes include sole shape, cuttlefish bone shape, thumb shape, oblique triangle, etc.; Small cutter shapes include water chestnut, small foot, spherical, bar, etc.

The third is the scraper, which can cut the shape and make the clothing pattern, and there are various arc-shaped and square double-sided scrapers.

Stone carving chiseled. It is a steel rod-shaped stone carving tool, the lower end is wedge-shaped or conical, there is a cutting edge at the end of the end, the upper end is struck with a hammer to make the lower end of the blade part stressed, according to the shape of the blade part, it is divided into sharp chisel, flat chisel, semi-circular chisel and tooth chisel, it is the basic tool of stone carving.

3. Point model. It is a three-coordinate locator used to copy stone carvings and wood carvings. Find 3 datum points on the plaster statue, use the positioning steel on the point profile instrument to align and fix, use the sliding parts and universal joints and pointers on the point profile instrument to align any space position on the statue, and lock the movable parts.

The point gauge is moved to the stone or wood, the steel is aimed at the corresponding datum point, and the pointer can mark the point on the plaster statue on the stone or wood block, and the stone carving and wood carving can be accurately reproduced.