The Y axis of the engraving machine will shake in a certain section! Urgent!!!

The jitter of the y-axis may be a stepper motor.

If it is caused by a loss of step, it does not matter if it is not affected during the carving. Generally speaking, it has nothing to do with your spindle speed, if the frequency of jitter is high, you need to do some inspection and maintenance, generally cleaning the machine, the maintenance of the guide rail, checking the line, fixing screws, etc. - Luoyang Guan Lin.

Woodworking Machinery Sales Office.

Luoyang Guan Forest Woodworking Machinery Sales Office.

The company has been operating woodworking machinery for more than 20 years, and has many well-known brands in the country, and its sales performance is among the best. The warehouse is more than 5,000 square meters, which is the vanguard of warehousing sales in the domestic industry. Main business:

Precision panel saws, manual automatic edge banding machines, single and double row drills, CNC computer engraving machines, cold press machines, sliding table saws, wire saws, band saws, planers, planers, router milling machines, vertical planers (end mills), sanding machines.

Multi-rip saws, plugging machines, butting machines, tenoning machines, round bar machines, woodworking profiling lathes. Sales channels.

Wide coverage, welcome customers at home and abroad to inquire.

Bus routes: 81 or 55, the whole journey is about one kilometer.

1. Walk about 100 meters from Luoyang Railway Station to the bus station.

2. Take No. 81, after 14 stops, arrive at Guanlin Market Station (you can also take No. 55) 3, walk about 330 meters, and arrive at Longmen Avenue Cuiyun East Road. Map.

This data is ** on the map, and the final result is subject to the latest data on the map.

Adjust the drive subdivision, check whether there are friction marks in the circular rail of the mechanical part, and whether the screw bearing seat is loose and damaged.

The marbles in the sliders on both sides of the Y-axis gantry are broken a lot, which causes the Y-axis to shake when running. The solution is to replace.

The coupling may have a large backlash, and during use, dust or metal debris enters the guide rail, and the beads are worn.

There may be several situations, 1: whether there is a scar on the coupling 2: see if the screws on the gantry are loose, the most important thing is to look at the two planes on the side of the y axis.

3: The screw or rack is worn out greatly, and the machine tool vibration is caused by the fast speed.

4. The circuit in the distribution box has a virtual connection caused by static electricity.

This is because of the lead screw, if you are a rack machine, it will not shake, this is a common problem of the lead screw machine

Is it that the lead screw is not straight?

Or is your transmission line having poor contact?

Check the synchronous wheel of the rack machine, the synchronous wheel should be loose, the left and right support frames are removed, and the bearing seat on the screw rod of the screw machine is stuck, climb to the bottom of the machine, and clean it with W40 rust remover.

Friend, take a look at the space of Jinan Huaibo, add me, and I'll help you troubleshoot.

The y-axis jitter before leaving the factory, it may be that the gear ratio is not set correctly, and the jitter after use, if the speed is not very fast jitter, it is generally a problem with the drive motor, because the y-axis is driven by dual motors, check whether the two motors or drivers are normal.

The manufacturing accuracy of the machine tool is low, the gantry material is too light and the rigidity is not good, if it is the lead screw machine, it is due to the screw is too thin and the screw is vibrating, if the rack machine is due to the rack installation error, or there is a stolen object on the rack, the machine is damaged and the gap is generated.

Please explain the transmission mode of the Y-axis of the machine. Screw drive: It should be the installation accuracy of the guide rail.

Rack and pinion drive: 1Rails:

1) Installation accuracy problem. (2) There is a foreign object on the guide rail 2rack; 1) Installation accuracy problem.

2) Foreign bodies on the teeth.

It may be that there is damage to the ball screw, and there is always a problem in the same place, you should take it apart to see if there is a problem, which is very important for the use of the machine tool, be sure to open it to take a look

If the lead screw is damaged or has a foreign object, or check if there is any foreign object or damage on the rail

Friend, this problem, Jinan Huaibo suggests that you check whether your Y-axis drive motor (stepper motor) is also faulty, and there is a problem with the Y-axis line (this is the elimination method of the rack machine).

If you use a screw machine at home, the screw rod of the Y-axis does not rotate and there is a stuck place, so it is recommended to check the bearing seat.

--I hope Jinan Huaibo's suggestion is helpful to you, thank you.

The bearing of the y-shaft is jammed and cleaned with W40 rust remover.

The manufacturing accuracy of the machine tool is low, the material is too light and the rigidity is not good, if it is the lead screw machine, it is due to the fact that the lead screw is too thin and flutters, if the rack machine is due to the error of the rack installation, or there is a stolen object on the rack, the machine is damaged and the gap is generated.

Engraving is a kind of drilling and milling combined processing from the processing principle, and a variety of data input modes of the engraving machine are easy to use according to needs. There are two types of computer engraving machines: laser engraving and mechanical engraving, both of which are divided into high power and low power. Because the range of applications of engraving machines is very wide, it is necessary to know the most suitable application range for various engraving machines.

The low-power ones are only suitable for two-color boards, architectural models, small signs, three-dimensional crafts, etc. Because the power is too small, it greatly affects the range of its application. A high-power engraving machine can do something with a low-power engraving machine.

It is most suitable for large-scale cutting, relief, and carving.

This may be a problem with the mechanical part.

Are you a screw engraving machine? If it is, it is possible that the screw rod is not good

It may be that the gear is aging! Also, the empty walking speed is too high, so it will be like this! I think it's too high.

Is it a rack or screw machine? The reason for the shaking should be that the machine is not lubricated well, add oil to the lead screw and guide rail to try, and then you have to adjust and pull!!

Caused by the wear or fall off of the Y-axis slider pin.

Jinan Shengdiao CNC: It may be that there are too many dirty things stuffed in the slider.

I think the Y-axis gap is too large.

64, Furong House sent Xin gradually Wang Changling.