How to use the telecom porous cat box to make 2 computers go online at the same time? Need a router?

Hello: The telecom multi-function cat does not have the routing function turned on, it is recommended that you can connect a router under the cat, which is more convenient, the connection method is as follows, <>

Then in the case of not connecting the optical modem, set the LAN port setting of the wireless router, set the IP address to it, and then connect the optical modem, and then you can enter the wireless router, and then you can set other items on the router, enter the setup wizard interface, select PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, there will be an account number when opening broadband, you can fill it in.

I hope I have been helpful to you, and if you have any questions, please feel free to continue to consult us.

According to your description, if you have multiple terminals surfing the Internet at the same time, it is recommended that you buy a router, and then set up the router correctly and connect the terminals.

The correct connection method for setting up the router is now provided

1. Connect the network cable (or direct home line) of the cat to the WAN interface of the router, connect any interface of the LAN port of the router to the computer, open InternetExplorer on the computer, and enter the correct IP address of the router (the default user name and password refer to the label on the back of the device or the manual).

2. You can also refer to the router instruction manual, enter the configuration interface of the router, and set up the router correctly according to the setup wizard. Then, connect the WAN port of the router to the modem, and connect the LAN port to other terminal devices such as laptops respectively, and restart all devices to realize the normal Internet access of multiple computers, and also realize the construction of wireless networks.

First enter your cat to see if the routing function is turned on, open the setting can be practical, if there is no routing function, you need to add a router, porous cats should generally have a routing function, some need to crack to open the routing function, if you are not familiar with it, buy a router.

I've heard that it can be used when you plug it in, but I heard that you can't set a static IP address and do port mapping.

You can not use a router, the general operator has set up the wireless cat to work in bridge mode, that is to say, you have multiple computers connected to the wireless modem, and each computer uses a broadband connection to dial-up the Internet.

1 cat does there is an instruction manual, if there is a note about the route setting 2, try to see if you can enter the cat's setting mode, you can go inside you can find the setting method 3, search for your cat's model from the Internet, find the corresponding route unlock method 4 get a router.

Dear users, hello:

You can connect two computers to the LAN port of the cat at the same time, and dial up the Internet in the computer separately. You can also buy a router, the router WAN port is connected to the LAN port of the cat, the computer is connected to the router LAN port, the router is set up to automatically dial, and the computer is connected to the router to go directly to the Internet.

Anhui Telecom will serve you wholeheartedly, I hope mine can get yours.

If you have any questions, you can go to the online business hall of Anhui Telecom to consult the staff, Anhui Telecom officially opened the pre-sale of Redmi 1S Telecom version, you can go to the online business hall to view the details, I wish you a happy life!

Telecom modems cannot be directly connected to two computers, and routers need to be used.

The first step is to connect the line according to the connection method between the router and the cat.

The second step is to enter the address you see on the router in your browser, which is usually. Then enter,Enter the corresponding account and password,Generally, the newly bought admin is confirmed to enter the operation interface。 Since the address of the fiber modem and the wireless router is the same, it will cause conflicts, so you need to modify the address of the router, set the LAN port in the network parameters to modify the IP address as shown in the figure, click Save, and restart the router.

Step 3: Click on the setup wizard, click on the next step, enter the Internet mode setting, we can see that there are three options for Internet access, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed. (It is recommended that you choose to let the router automatically choose the Internet access method) choose PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, open broadband There will be an account number with, fill in it OK. Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGN

For wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network. The next step is to set it up successfully. Click Done, and the router will automatically restart.

How to use the telecom porous cat box to make 2 computers go online at the same time? Need a router?

Dear, hello, I am happy to answer for you, how to use the telecom porous cat box to make 2 computers go online at the same time? Need a router? is a tool that needs to be prepared:

Computers, fiber optics. 1. Open Start. Click on the Windows logo in the bottom left corner of the screen.

Make sure you do this on the computer that shares the internet and not the one you just connected to. 2. Open the control panel. Type Control Panel, and then click Control Panel.

3. Click Network & Internet. You will find this title on the left side of the Control Panel window. 4. Click Network and Sharing Center.

It is located in the middle of the page. This will open a list of your current connections. 5. Click Change adapter settings.

You will find this option in the top left corner of the window. 6. Select Wi-Fi connection and Ethernet connection. Click on the computer icon that has "Wi-Fi" under it, then hold down the Ctrl key and click on the computer icon that has "Ethernet" under it.

7. Right-click on the Wi-Fi connection. Doing so will prompt a drop-down menu to appear. 8. Click Bridge.

It is located in the drop-down menu. After a few moments, your computer's Wi-Fi will be shared with another computer in a "bridged" way.

Telecom's optical modem does not have a routing function, and does not support multiple devices to access the Internet at the same time.

1.Plug the broadband modem or home network cable into the WLAN port of the router, and then connect to the computer through the network cable or wireless network.

3.After entering the page, you will be prompted to enter the management account, which also needs to be found in the manual, and the general account password is admin.

4.Click the Setup Wizard, follow the prompts on the page to set up broadband without oppoe dialing, and enter the broadband account password.

5.According to the prompts on the page, check the box to turn on the WiFi network, and set the password, when finished, click Next, and the device will automatically restart.