Distinguish gypsum board from Ette board, cement board, calcium silicate board

Gypsum board is gypsum, and if you buckle it, there will be lime falling down, which is lime board. The cement board is better distinguished, it is made of cement. Calcium silicate board, a little bit of lime, but its surface is much harder than gypsum board, not white, more common yellow.

They are used on partition walls and suspended ceilings. But here to say, gypsum board is very afraid of moisture, easy to deform and brittle, so it is not easy to use. Calcium silicate board is the best, waterproof, not afraid of insects, otherwise A1 grade.

It is also non-asbestos and environmentally friendly. Ette board is now as good as calcium silicate board. If you want to use these things.

It is recommended that it is best to use calcium silicate plates...

The three kinds of boards contain different components and different components, according to the strength: cement board, Ette board, calcium silicate board.

According to the plasticity size: Ette board "cement board" calcium silicate board.

According to the size of fire resistance: cement board, Ette board, calcium silicate board.

According to the durability size: cement board "Ette board" calcium silicate board.

According to the use, the materials available for the ceiling are: Ette plate,

Available materials for partition walls: cement board, Ette board, calcium silicate board.

Materials available for exterior walls: cement board, Ette board.

Available material on the ground: cement board.

Three kinds of boards of the same thickness** from high to low: Ette board, cement board, calcium silicate board.

From the construction point of view: the Ette plate is better than the other two kinds of plates, and the construction is simple and the loss is low.

Gypsum board is made of gypsum as the main material, adding fibers, adhesives and modifiers, and is mixed and pressed and dried. It has the characteristics of fire prevention, sound insulation, heat insulation, light weight, high strength, and small shrinkage. Antite board is a kind of fiber reinforced Portland flat plate (fiber cement board), its main raw materials are cement, selected minerals, through the slurry method high temperature autoclaving, good waterproof performance.

Gypsum board is generally used for finishing, such as partition walls, partitions, ceilings, veneers, etc., but it has poor water resistance and should not be used in humid environments. Alter board can be used as a partition wall in the bathroom, or for outdoor roofing, or for exterior wall panels, which can maintain stable performance in long-term moisture environments.

1. Ette board has the effect of sound insulation, and its strength is much better than that of gypsum board.

2. The use effect of Ette board in these humid places such as bathroom, kitchen and laundry room is very good, and the effect of gypsum board in other places will be better, because it is economical and affordable.

3. One of the most obvious differences between Ette board and gypsum board is that the waterproof and moisture-proof performance of Ette board is better than that of gypsum board, generally in the building materials, Ette board can replace gypsum board as the base material used for decoration, if it is painted on the surface of Ette board, the paddle will be relatively poor.

4. Another difference between Ette board and gypsum board is that they are different, and the general gypsum board is cheaper than Ette board in terms of cost.

What are the ceiling design requirements.

1. It is used to shield structural components and various equipment, pipelines and equipment.

2. Regarding the ceiling of the room with acoustic request, its appearance shape and information should be considered according to the sound quality request.

3. The ceiling is the main part of the interior decoration, which should be combined with the overall planning of the interior planning, and the various lamps and air conditioning outlets installed on the ceiling should become the organic whole of the ceiling decoration.

4. It should be convenient to repair all kinds of equipment and pipelines hidden in the ceiling.

5. The ceiling should be convenient for industrial construction and try to prevent wet work.

What are the benefits of light steel keel ceilings.

1, light steel (paint) keel ceiling is a new type of building materials, with the development of China's modern construction and balance service, light steel keel ceiling is widely used in hotels, terminals, train stations, stations, playgrounds, shopping malls, factories, buildings, old building renovation, interior decoration settings, ceilings and other places. The light steel (painted) keel ceiling has the advantages of light weight, high strength, waterproof, shockproof, dustproof, sound insulation, sound absorption, constant temperature, etc., and also has the advantages of short construction period and simple construction.

2. The light steel keel ceiling is a metal skeleton for construction made of continuous hot-dip galvanized strip as raw material and rolled by cold bending process. It is used for the modeling decoration of non-load-bearing walls and building roofs with paper-faced gypsum board, indiscriminate gypsum board and other lightweight boards. It is suitable for the modeling and decoration of various building roofs, the basic materials of the internal and external walls of buildings and scaffolding ceilings.

Ceiling is inseparable from every family in the decoration, when we choose the ceiling material, because there are many types of materials, how should we choose? Do you know what is the difference between Ette board and gypsum board? A lot of people don't know!

What is it and what are the tips for choosing gypsum board?

1. The sound insulation effect and strength of Ette board are much better than that of gypsum board.

2. Ette board is a kind of decorative replacement product, such as bathroom, kitchen, laundry room and other wet places with Ette board effect is very good, in other places with gypsum board effect is better, economical and affordable.

3. There is a big difference between Ette board and gypsum board, that is, the waterproof and moisture-proof performance of Ette board is better than that of gypsum board, and Ette board can replace gypsum board as the base material used for decoration in building materials. But if it is painted on the surface of the Ette plate, then the effect is often unsatisfactory.

4. Bathroom, kitchen, locker room, laundry room, gym and other wet places are better to use Ette board, and other places are better to use gypsum board.

5. In addition, the cost of gypsum board is cheaper than that of Ette board.

Gypsum board purchase tips:

1. When choosing gypsum board, we must pay attention to the purchase of standardized guaranteed gypsum board. Standardized gypsum board, on its packaging box, will be clearly printed with the name of the product, quality grade, production date and other symbols and fonts.

2. Look at the cracks on the surface of the gypsum board, the upper and lower layers of the gypsum board should be robust and have no cracks. Therefore, when choosing gypsum board, you must choose gypsum board with lubricating fluid on the surface, and there can be no stains and unequal colors on the appearance.

3. You can knock on the gypsum board and listen to the sound, if the sound made by the gypsum board is very strong and low, it means that the quality of the gypsum board is relatively high; If it makes a wide sound, it means that the gypsum board has a hollow drum phenomenon, and the texture of the gypsum board is not tight, and the quality is not very good.

4. When selecting, you can observe the actual size of gypsum board and the standard size deviation, the more the deviation, the better, and the effect of decoration is more beautiful.

5. Deviation between flatness and right-angle deviation will affect the quality of gypsum board, and now the quality of gypsum board on the market is divided, and the Ling family can choose gypsum board with small size, flatness and right-angle deviation according to the size deviation, flatness and right-angle deviation when purchasing.

When we choose a ceiling material, we need to understand that we have a certain understanding of the difference between Ette board and gypsum board. The above is the difference between Ette board and gypsum board introduced to you today and the purchase skills of gypsum board, which is the end here.

The main differences are Oga, the main raw materials are different, the performance is different, and the uses are different, as follows:

First, the main raw materials are different.

1. Ette plate.

The main raw materials are cement, plant fibers and minerals, which are autoclaved at high temperature by the flow slurry method.

2. Gypsum board.

It is a material made of building gypsum as the main raw material.

Second, the performance is different.

1. Ette plate.

It has the advantages of fireproof, moisture-proof, waterproof, good sound insulation, environmental protection, fast installation and long service life.

2. Gypsum board.

It has the properties of light weight, high strength, thin thickness, convenient processing, sound insulation, heat insulation and fire prevention.

Third, the use is different.

1. Ette plate.

It is often used as exterior wall board (with moisture-proof, waterproof, and soundproof effects), sanitary partition wall, outdoor roof roof, exterior wall insulation board, interior decoration, ceiling, etc., and can also be used as a substrate for decoration and use.

2. Gypsum board.

It is widely used in the interior partition walls of various buildings such as residences, office buildings, shops, hotels and industrial plants, wall cladding panels (instead of wall plastering layers), ceilings, sound-absorbing panels, ground base panels and various decorative panels, etc., and is not suitable for installation in bathrooms or kitchens in indoor rolling schools.