Can I redo it if I don t like it, and can I do it myself?

Yes, before performing the second sewing, you need to choose the color, and you need to shovel off the previous one, clean the seam before proceeding with the second application. It is recommended that you must keep the joints clean and dry before construction. Hope mine can be helpful to you.

If the sewing is not done, it can be redone, as long as the following points are done:

First, in the process of sewing construction found that there is not a good seam, with a sewing knife to deduct the undone sewing agent, re-gluing, and then press the seam, in the construction process of the sewing agent has not been cured, the sewing agent is still soft, with a sewing knife to deduct the sewing agent is also easy, if you wait for the sewing agent to be deducted in the curing process, it is more time-consuming.

Second, if it is a solidified sewing agent, then you can only prepare professional rework tools, a 1600-watt heat gun, and a shovel. Use a heat gun to blow the sewing agent that needs to be reworked, blow the sewing agent with a hot air gun in one hand in the front, blow the sewing agent softly, hold a shovel in the other hand in the back, follow the heat gun and push the sewing agent forward, and the sewing agent after blowing soft is gently pushed out of the tile gap with a shovel.

3. Remember to clean up the gaps, especially the reworked tile gaps, to clean them cleanly, and there can be no residue of the joint agent in the gaps, including the edge of the tile gaps, otherwise particles will appear when pressing the joints, resulting in an uneven and smooth surface of the joint. Don't look at the technical content of beauty sewing is not high, but doing beauty sewing is a meticulous work, you need to have enough patience, confidence and carefulness, focus in order to do a good job in beauty sewing, focus to be professional.

Answer: You can do it yourself, you can refer to the following stepsStep 1: remove dust and debris from the tile joints and wipe them clean; Step 2: Select the tile seam area and the color of the gel, and use the glue gun to evenly fill the gap of the tile; Step 3:

Choose the right tool to press the seam outward from the angle, which is required to be smooth and have no obvious knots; Step 4: Wait for 12 hours for complete curing; Step 5: Clean up the cured remnants and sweep them clean.

Precautions for tile seams 1. Any tile needs to be seamed, including seamlessly paved tiles. In fact, seamless also needs to be seamed to prevent thermal expansion and cold contraction, and the knowledge gap will be relatively small. 2. Tile seams are divided into two ways:

Half-filled and full-filled. , half filling** cheaper, the bottom is filled with grout first, and the surface is filled with beauty sewing agent, but the service life is short; Full filling means that the gaps are all filled with American sewing agent, which will not hide dust, and the service life is much longer, but it is slightly higher. 3. After 24 hours of tile paving, wait for the surface to dry before proceeding.

4. There are many fume stains in the kitchen and bathroom, and it is best to choose the walls and floors to be filled with beautiful seams, waterproof, mildew-proof and oil-proof. 5. Pay attention to the control of the strength at the junction of the cross seam and the ground wall, and pay attention to the direction when pressing the line. The surface of the tile is stained with a beautiful seam agent and should be wiped off immediately.

6. When sewing the seam, the wall should be first and then the ground, and after brushing a few pieces, you should go back to check it to see if there is any place that needs to be repaired. 7. Seams can also be considered around the kitchen sink, so that there will be no mold. 8. It is best to pull the family together, and the two people cooperate to operate, which is much more convenient and not so tiring.

You can refer to it.

Absolutely! However, it is more recommended that you use water-based sewing agent, which is easy to clean and suitable for novice DIY!

Yes, the beauty sewing agent is the last to do, but don't wait too long, too long there will be impurities and dust in the tile gap, it is difficult to clean, it will be more labor-intensive to do the beautiful seam, and the cost will be higher.

Tile seams: 1. From a practical point of view, there are benefits. It turns out that the gap is cement or caulk, which is not reliable and does not tolerate dirt. These two shortcomings can be avoided after using beautiful sewing.

2. Tile seam is a combination of art and home decoration, which can not only enhance the overall visual beauty of home decoration, but also highlight the quality of life and status.

3. The tiles are not beautiful, after a long time, the gaps begin to be gray and gray, and the heavy ones have more peculiar smells floating out, bacteria are overflowing, and the loss of stoves has caused a serious threat to the health of the family. The tile is made of beautiful seams, which avoids the emergence of the problem.

4. If there are conditions, you can do it in the whole house, or do it in public areas, such as living rooms, dining rooms, corridors, etc., if you are short of funds, do not do it temporarily, because the sewing agent can be done later. <>

Beautiful sewing can be done.

Tile seams can be done by yourself, but it also has certain skills, so for the overall beauty of home decoration, it is best not to do it ourselves. Because tile joints require a certain amount of technology, if you don't have any knowledge of it, it's best not to try it lightly.

Because the tile seam can not be redone after it is done, so in order to ensure the beauty of the home, the owners had better invite some professionals to help. Then explain your needs and ideas clearly, so that you can have a beautiful decoration.

What method is used to do tile beauty sewing yourself

1. Prepare sewing agents and tools.

2. Clean up the dirt in the tile gaps: It is recommended that this special grout knife adopt a hook design, which can be more suitable for the tile gaps and clean up the internal debris clean. If you don't have this tool, it doesn't matter if our store has a delivery.

3. After the gap is cleaned: fill the gap with mortar, reserve a depth of about 2mm, so that you can save some beauty joint agent materials, and then according to the size of the tile gap, cut the rubber head with a wallpaper knife and assemble the glue gun.

4. Use the booster to squeeze out the first 15-30cm glue in the hose and discard it: because this part of the sewing agent is at the outermost end of the hose for a long time, it is protected by wax when sealed, which may be mixed into it and affect the use effect.

6. Gently squeeze the glue head into the gap between the tiles. (Note: Don't be too anxious to squeeze too hard, you should punch it in slowly and evenly.) )

7. After each piece of sewing agent, it is necessary to flatten the sewing agent with a sewing ball, which has the advantage of being able to better penetrate the sewing agent into the gap, increase its dense type, and increase the service life of the sewing agent.

8. After the seam is pressed, if the excess sewing agent on the masking paper is too obvious, it must be cleaned with a scraper plate in time to prevent it from being difficult to clean up after drying.

9. After the above ones are completed, you can tear off the masking paper. In this way, you will find that there will be no residual grout next to the tile gap, which is easy to clean and will not damage the tile, and the effect is beautiful.

Wipe with water. If you buy a water-based sewing agent, you can wash it with water before curing, and the sooner you clean it, the better.

If you do not buy a cleaning agent, you can also use a certain concentration of alcohol or oxalic acid. Wet the sewing agent with hot water and wipe it off. Laying masking paper around the gaps in the tiles before construction can avoid getting on top of the tiles.

Apply the sizing carefully during construction and keep it stable so that the colloids are not sprayed on the periphery of the gaps.

The construction of the beauty sewing is a technical work, if the construction personnel do not construct properly, it is easy to lead to the deterioration of the beauty sewing effect, then it is necessary to re-carry out the beauty of the sea, so can the beauty of the seam be redone? Let me give you a detailed introduction to the relevant knowledge content.

Can the sewing be redone?

1. Under normal circumstances, beauty sewing can be redone. However, before re-doing the seams, you must determine the color of the seams, and remove the original seams, and clean up the dust and residual seams in the gaps of the tiles. Before proceeding with the joint application, be sure to keep the tile gap position clean and dry.

2. If you want to remove the original seam, then you need to use a small spatula to cut along the position of the seam, and then grab one end of the seam after cutting, and you can generally tear off the old seam. If the seam cannot be removed, you can use the hot air speed of the hair dryer to blow on the seam, and then the seam will melt, so that it is easy to tear off.

3. When using a hair dryer to blow the seam, do not use too high a temperature, if the temperature is too high, it will easily lead to cracking of the tile. When the seam melts, we only need to gently grasp one end of the seam, and we can generally pull the seam off from the tile gap.

4. When most of the beautiful seams are torn off, you also need to use a vacuum cleaner to vacuum the gap of the tile, suck out the dust and debris in the gap, and then use a damp rag to wipe the tile gap.

5. When the gap of the tile is cleaned and dried, you can redo the beauty joint construction. The operation steps of re-doing the beauty seam are actually the same as the steps of the first time to do the beauty seam construction, the only thing that needs to be paid attention to is the cleaning of the tile gap position, which must be checked in detail, if the tile gap position is not cleaned up, it is easy to lead to the later beauty of the seam can not be closely combined with the tile gap.

The above is the detailed introduction I shared with you today about can the beauty sewing be redone, I hope it can help you answer the doubts in your heart, if you need to know more relevant information, you can continue to ******, and the follow-up will present you with more exciting content.

As a novice decorator, it may not be very clear whether the sewing can be redone. But don't worry, I'll give you a brief introduction to the question of can you redo the sewing, maybe it will help you.

It can be redone, but it will be more troublesome. Therefore, before the second construction of the beautiful seam, you need to choose the color of the beautiful seam, and you must shovel off the previous work until it is cleaned up. At the same time, we should also remind everyone that:

Before construction, it is important to keep the gaps clean and dry.

There are these ways to remove the sewing agent:

Method 1: First of all, you need to use a special utility knife, and you need to choose a hard sewing knife, because the sewing agent will be harder after it is done. Then we need to use a utility knife to remove the beauty sewing material that we sat on, and at the same time ensure that the grooves are clean and flat, and it is best not to damage the glaze of the original tile.

Method 2: In addition to using professional tools, you can also use a hot air blower to heat the sewing agent and melt it, which will help to quickly clean out the sewing agent. And the ** of a hot air blower is not expensive, you can prepare one.

Method 3: The last method is to use the cleaning solution of the grout, but this method is only suitable for the grout contaminated on the surface of the tile.

Precautions in the construction process of winter sewing.

1. In the process of applying Hu manuscript, remember to close the doors and windows, because the wind in winter is relatively cool, the cool breeze is easy to make the sewing agent crack when it solidifies.

2. You can soak the real porcelain glue in warm water at 50-60 for ten minutes, so that it will be much easier to play the real porcelain glue.

3. In the construction process, the environment needs to be kept dry and moisture-proof as much as possible, if there is moisture and water droplets on the wall, it is easy to change the color of the beauty joint agent after construction.

4. The real porcelain glue can not be scrubbed within 48 hours of construction, and the real porcelain glue should be fully dried and cured.

Winter sewing agent storage.

1. The temperature is lower than 5 in winter, and the sewing agent cannot be stored in the car for a long time.

2. If there is heating at home in the north, it is recommended to put the agent in a carton and put it indoors; If there is no heating in the trousers, it is recommended to cover the sewing agent with a warm layer such as a quilt.

Summary: After reading the above introduction, I believe you have a further understanding of whether beauty sewing can be redone. If you need to know more about it, please continue to ******, and more exciting content will be presented to you in the future.