The leaves of the triangular plum are always long, so how can it produce a lot of flowers?

If you manage and maintain it well, you can bloom a lot of flowers

1. Water properly.

After changing the pot, watering too early or too much causes the leaves of the triangular plum to wilt, it is necessary to carry out water control treatment, stop watering and put it under astigmatism for maintenance, wait for 5 days after changing the pot and then water, the watering frequency is once every 3 days, do not overwater.

2. Increase light.

What to do if the leaves wilt after changing pots caused by insufficient light, it should be placed in a sunny place, so that the Triangle plum can receive 8 hours of sunlight, so as to meet its light-loving attributes and restore the vitality of the leaves of the Triangle Plum.

3. Control the temperature.

The temperature is too low and the leaves wilt after changing the pot, so the growth temperature should be controlled at about 15 30, and the low temperature environment should not occur, so that the Triangle plum can quickly return to normal and start growing in a warm environment.

4. Excessive fertilization.

If the potting is too much fertilization for the triangular plum, it will also cause the phenomenon of wilting leaves, it is necessary to water the thick fertilizer with water in time, dilute the fertilizer, and then re-maintain, and then apply the thin fertilizer frequently, so as to avoid the occurrence of thick fertilizer burning roots.

5. Serve pot maintenance.

The Triangle Plum that has just been repotted may also be due to not adapting to the new growth environment, and the leaves are wilting, at this time, only normal maintenance is needed to ensure that the Triangle Plum has the right water and fertilizer, so that it can quickly take the pot to pass the slow potting period.

After changing the pot in the spring of each year, after the plant is potted, the branches of the triangular plum can be topped to remove the apical dominance and promote the growth of side buds and flower buds.

1. The sun is abundant, and the triangular plum likes light, and blooms less or even no when the light is insufficient.

2. Good ventilation, the leaf surface has the effect of breathing, and good ventilation and fresh air can continue to loosen.

3. The temperature and humidity are suitable, the southern flowers of the triangular plum, so they like moist air, the humidity is 60%, and the temperature is between 15 and 35, which is the best climate.

The best way to do this is to make sure that the soil has enough nutrients, because the more nutrients, the bigger the flowers will be, the longer the flowering time will be, and finally the flowers will be luxuriant.

How to grow fewer leaves and bloom more flowers1. If the triangle plum is left to lack light for a long time, it will affect the flowering of the plant. Move the Triangle Plum to a sunny place to grow, and the longer the sun shines, the more flowers it will bloom.

2. If the amount of water and fertilizer is not properly controlled, it will directly affect the growth of the plant and make it unable to flower. Before flowering, control the amount of water and fertilizer, and wait until the leaves wilt before watering. Then stop applying nitrogen fertilizer and just add a little phosphorus fertilizer to make it bloom smoothly.

3. The Triangle Plum does not bloom for a long time and does not change the pot, because the root system of the Triangle Plum grows faster, and when it grows vigorously, its root system can extend to several meters, and the space in the pot is insufficient at this time, which affects the growth and flowering of the plant.

Usually watering master the principle of "not dry, not watering, watering is thorough". However, in order to bloom neatly and multi-flowered, water control must be carried out before the light leaf flowers bloom.

The watering of bougainvillea is controlled from September, and each watering can only be carried out after the potting soil is dry and the branches and leaves are soft and drooping, and so on and so on for half a month, and then the normal watering will be resumed after half a month.

Do not apply fertilizer during the water control period to avoid fertilizer burn the root system. In this way, it will take about a month to show buds and bloom, and the flowers will open neatly and vigorously.

After three leaves, the flower buds emerge, the triangular plum grows for a month, begins to be pretty, the tender leaves become round, a sharp corner on the edge, and the long branches regularly grow flower bones on the edge of a leaf, there is one, there are two, up to three, clamped on the edge of the leaf to form a combination, staggered arrangement on the branches.

The flower bones of the triangular plum are composed of three triangular petals, with stamens in the middle, which does not seem to be as delicate as other flowers, but has a neat and chic, delicate and delicate tone. Before the winter, the flower buds rent and hold the pots, and the long branches fall full of flower bones and hang down, forming a flower waterfall, which is spectacular.

If the triangular plum grows two to three leaves without the disadvantage of lack of fertilizer, it can grow flower buds.

After finding that the triangular plum only grows leaves and does not flower, you can increase the light to avoid the branches and leaves from flowering, and you can also choose to reduce watering and apply phosphorus and potassium fertilizer once in about 10 days when the flowering period is approaching, so that the appropriate amount of water and fertilizer can bloom normally, and timely loosen the soil and change the pot to provide a loose growth environment for it, and prune the branches and leaves to avoid nutrient consumption to make it flower.

1. Increase light.

What to do if the triangular plum only grows leaves and does not bloom.

The Triangle plum is very light-loving, and the lack of sufficient light during the growing season will cause it to have long branches and leaves, and it is difficult to receive enough sunlight to promote the differentiation of its flower buds and flowering. Place the triangular plum in a sunny area with plenty of sunlight so that it can bloom better when exposed to more than 8 hours of light.

2. Reduce watering.

Overwatering before flowering will also make it difficult to differentiate flower buds and flower, so it is necessary to reduce watering so that it does not absorb too much water and is difficult to flower. You can choose to water once every 3 5 days, the amount of water should not be too much, and stop watering after the soil is wet and seepage.

3. Apply phosphorus and potassium fertilizer.

What to do if the triangular plum only grows leaves and does not bloom.

Because of the application of too much nitrogen fertilizer, what to do if the Triangle plum only grows leaves and does not bloom, it is necessary to stop the application of nitrogen fertilizer, and choose to apply a thin phosphorus and potassium fertilizer about 10 days to provide sufficient nutrients for the flowering of the Triangle Plum, so that it can bloom large and beautiful flowers.

4. Loosen the soil and change the pot.

The soil is compacted and the growth space is too narrow, which will also make the root system of the Triangle Plum unable to stretch normally for nutrient absorption, so it is necessary to loosen the soil and change the pot in time to make the soil loose and fertile, and choose a slightly larger pot to replant to promote the flowering of the Triangle Plum.

5. Prune branches and leaves.

What to do if the triangular plum only grows leaves and does not bloom.

The branches and leaves of the triangular plum grow too quickly, resulting in excessive consumption of nutrients, which will also cause it to have long leaves and not bloom. The vigorous branches on the top should be thinned and the excess branches, weak branches and old branches should be cut off so that the triangular plum can bloom normally.

The details are as follows:

1. Too much fertilizer and water, the triangular plum is a very barren plant, and the potted triangular plum often has to go through the test of life and death, and it is easy to bloom when it feels the crisis of survival. If in the process of breeding, the fertilizer and water are sufficient, and the triangular plum feels that the living environment is extremely comfortable, it is not easy to bloom, and it will only grow crazy branches and leaves, after all, the triangular plum is vine-like.

2. Insufficient light, in addition to too much fertilizer and water will cause the triangle plum to not be easy to flower, insufficient light will also cause the triangle plum not to bloom or bloom very little. If the light is insufficient, the triangular plum will grow like crazy branches, and the internodes of the branches are very long, resulting in the whole pot of triangular plum with long leaves and no flowering.

3. If the light time is too long, the lack of light will cause the triangle plum to grow and not bloom, and the light time is too long, which will also cause the triangle plum not to bloom.

4. Lazy flower varieties, in addition to the breeding method and breeding environment will affect the flowering of Triangle Plum, the varieties of Triangle Plum will also affect the flowering of Triangle Plum.

The triangular plum generally blooms when the temperature is high, and it blooms in summer along the Yangtze River and in autumn in Guangzhou, Yunnan.

Pay attention to the application of slow-release phosphorus and potassium fertilizer before flowering, and do not apply fertilizer once flower buds appear.

At this time, it is necessary to pay attention to water control, proper drought and sunlight, which is conducive to promoting the flowering of Triangle Plum.

Be careful not to apply nitrogen fertilizer, and secondly, when fertilizing and watering, do not water directly on the roots, you can water around the pot.

The reasons why the triangular plum only grows leaves and does not bloom include too much water, insufficient long-term light, and uneven fertilization.

1. Too much moisture.

Too much water is the main reason why the triangular plum only has leaves and does not bloom. Because the adaptability of the triangular plum is very strong, it can withstand heavy water and endure drought, but when the watering is too frequent and the water is too sufficient, the triangular plum will only care about the crazy growth of branches and leaves and can not take care of the differentiation of flower buds, so there is a result of lush branches and leaves but basically no flowering.

2. Long-term lack of light.

If the triangular plum is in a low-light environment for a long time, the triangular plum will have long branches and leaves, and there will be only long leaves without flowering.

3. Unbalanced fertilization.

Due to the large amount of flowers, the amount of fertilizer required is also very large. If the fertilization is uneven, such as applying a large amount of nitrogen fertilizer during flowering, and ignoring the replenishment of phosphorus and potassium, there will be a situation where the branches and leaves grow a lot, but the flowers are basically not flowered.

Characteristics of the Triangle Plum

Triangle plum is a purple jasmine family, the leaf flowers are woody vine-like shrubs, the flowers are very small, yellow-green, three flowers are gathered in three red bracts, the peripheral red bracts are large and beautiful, bright red, orange-yellow, purple-red, milky white, etc. Because of its leaf-like shape, it is called "leaf flower".

Native to Brazil in South America, it prefers a warm, humid, sunny environment. Triangle plum is not cold-tolerant, drought-resistant, pruning-resistant, strong growth, likes water but avoids stagnant water. The planting of Triangle Plum requires sufficient light, and the Triangle Plum is not strict with the soil, so it is suitable for planting in fertile, loose and well-drained sandy soil.

The suitable growing temperature is 20 to 30 degrees Celsius.

1. To have sufficient light, the triangular plum is a strong positive flower, the light is not sufficient, the branches will grow, the light leaves do not bloom, and the spacing between its leaves and leaves will be very long, so before raising the triangular plum, first understand the light environment in your home, if the light is insufficient, it is recommended that you do not raise the triangular plum, because it is difficult to flower.

2. It is necessary to have sufficient phosphorus and potassium fertilizer, because any plant growth is inseparable from the supplement of fertilizer, especially the triangular plum, he has been growing and flowering, we choose the right fertilizer, choose the high content of phosphorus and potassium elements, and other elements are not missing, do not use simple potassium dihydrogen phosphate, so that there will be problems in the later stage of opening once or twice, and ensure that he is supplemented with fertilizer with high phosphorus and potassium content 2 3 times a month, so that it has sufficient nutrients, blooms more, and the flower buds are well differentiated.

The reasons why the Triangle plum only grows leaves and does not bloom are due to insufficient light, low temperature, wrong fertilization, and insufficient moisture.

Triangle plum is a light-loving plant that needs 8 hours of light a day to bloom. When the outside temperature is too low, you can move the triangle plum to a warm place for maintenance, or take protective measures. Triangle plum likes a moist growing environment, and daily maintenance needs to keep the potting soil moist.

During the growth period of Triangle plum, only nitrogen fertilizer should be applied, and appropriate phosphorus and potassium fertilizer should be supplemented.

Moisture management

When there is a lot of rain or when the temperature is low, water less or no watering. In the summer and autumn high temperature season, water once a day or every other day, and the water should be watered thoroughly; In the season when the temperature is low, it is advisable to water after 10 a.m. and before 4 p.m. to wet the soil. Trees that are thriving or slow to bloom should be treated with alternating dry and wet treatment, and watering should be carried out when more leaves on the branches have withered, so as to promote the formation of flower buds and early flowering.

In winter and early spring, water 2-3 times a month according to the situation, and only water when most of the topsoil in the pot is white. For trees with sufficient fertilizer and water, it is especially necessary to control the number of watering times and the amount of water each time, and inhibit the rapid growth of branches through water control. Do not use water such as well water that has a difference of more than 4 percent from the natural temperature.

The reasons why the triangular plum only grows leaves and does not bloom are as follows:

1. Insufficient light.

Triangle plum only grows leaves and does not bloom, and the plant has many long branches, which may be due to insufficient light to cause the plant not to bloom, and it is necessary to move the triangle plum to the south balcony with sufficient light for maintenance, but the triangle plum is a short-day plant, so it is best to control the daily light duration in about 8 hours, not more than 10 hours.

Second, the temperature is too low.

Triangle plum only grows leaves do not bloom, if the maintenance temperature is too low, then the growth of the triangle plum will be very slow, and even stop growing, the triangle plum will naturally not bloom, for the low temperature caused by the plant does not bloom, can make the triangle plum dormant, wait until the next spring and then enjoy the flowers, you can also improve the maintenance temperature.

3. Sufficient water supply.

Triangle plum only long leaves do not bloom, but also may be caused by sufficient water, if watering more diligently, triangle plum can not feel the lack of water, will be crazy long leaves, will not flower, can be controlled by water for 21 days, each time the observation of the leaves of the plant has been wilted and then watered, each watering is half of the usual line, to promote the triangle plum from vegetative growth to reproductive growth.

Fourth, partial application of nitrogen fertilizer.

Triangle plum only grows leaves and does not flower, it may also be caused by partial application of nitrogen fertilizer, the application of excessive nitrogen fertilizer, triangle plum will grow leaves wildly, inhibiting flowering, need to stop nitrogen fertilizer immediately, and use phosphorus and potassium fertilizer to promote rapid flowering of Triangle plum.

5. Precautions.

Triangle plum is very sensitive to urea, if improper fertilization, it may produce the phenomenon of lush foliage and few flowers, so it is necessary to be especially cautious when applying urea.

After the spring flowering is the vegetative growth period of the triangular plum, urea can be applied once every 1 week. This can not only supplement the consumption of plants after flowering, but also promote the growth of new branches, and lay a good foundation for reproductive growth.