What does the dot distance of the LCD mean??????? How to check it

Upstairs quite detailed.

This should mean that the LCD screen, if the size of the display is constant, then the resolution is indeed determined by the distance between pixels, which is the so-called point distance.

Hello. These parameters are important.

1 Best resolution: Generally speaking, the bigger the better, this is the most important.

3 point spacing: The orange is inversely proportional to the resolution. For the same size, the larger the resolution, the smaller the dot spacing. But the ratio of 27 inches to the point, the point distance will definitely be larger, this parameter is actually not the most important.

4 pigments, it should be the contrast of the missing group, of course, the higher the better. But don't believe too much in those dynamic contrasts, what is more or less tens of millions to one, in fact, the difference is not big. Don't pay too much attention to this parameter.

Added: Panel type: IPS is the best, MVA is second, TN is the worst.

Backlight mode: At present, the mainstream is LED backlight, and the early or discontinued products are CCFL interfaces: HDMI is the best, followed by DVI, and then VGA screen ratio:

16:9 is mainstream, and 16:10.

Point spacing: Point spacing is the distance between two phosphorescent pink pixels of similar color in the same elephant ruler. The smaller the dot spacing, the clearer and more delicate the display effect, and the higher the resolution and image quality. At the same time, the larger the display screen, the greater the impact of the dot spacing on the visual effect.

The distance between two dots of the same color.

The dot spacing is 100This means that the distance between the points of the grid is one hundred. In Tools > Sketch Settings > Snap > Grid > Change the x-axis distance of the grid to 100, and change the y-axis distance of the grid to 100. The prerequisite is that the grid is open in order to see the effect.

You may be using a mesh cloth made of inferior fiberglass with clay crucible brushing, plus me to talk about it in detail, your problem is not a problem for me. 1131523238

Dots pitch – The LCD screen is composed of countless dots, and dot pitch is the distance between these dots, the smaller the better!

Dynamic contrast: refers to the contrast value measured by the LCD in the dynamic picture. The merchant's digital game, which has no real meaning!

is the distance from pixel to pixel.

Just like 17-inch CRT, usually the best resolution is 1024*768, then it is 1024 pixels long, 768 pixels wide, and there is a distance between pixels and pixels, and the smaller the point distance, the clearer the display image (less distortion), but the point distance is too small compared to the smaller text display is a disaster, and it is difficult for the eyes to see clearly. Of course, it's not good if the dot spacing is too large,So the granularity is very strong,That's the case with old TVs,Larger screens,The resolution is too small,The dot spacing is very large。

So it's important to get a balance point and not care too much about the value of the point distance.

This has actually been solved a long time ago.

It's not that there is no clear display with a large dot matrix, but it's more expensive, and it's not too mainstream, so I don't usually see these messages.

After all, it's still a bargain that many people pay attention to.

This is just the optimal resolution, you can set the resolution according to your needs

Win7 operating system, you can make the word as big as you want.

Things are dead, people are alive, live and learn.