How do I set my broadband connection to connect automatically on my home computer?

Step 1: Make sure that our broadband account and password are saved in the broadband connection, and we can open the broadband connection to view.

Save your account and password:

Step 2: Open the network connection attributes, change the broadband connection attributes, specifically, the online neighbor right-click attribute Broadband connection right-click attribute Select the "Options" bar, remove the default "check" before the first and second options, and OK.

Modify Options:

Step 3: If we want to make the "broadband connection" run automatically when booted, we must add it to the boot startup item, the specific operation is: click "Start" All Programs Place the mouse on the "Startup" and right-click to select "Open", and put the "Broadband Connection" icon on the desktop into the "Startup" folder after opening (place the mouse on the broadband connection, hold down the left mouse button, and drag it directly into the folder).

Drag into the Startup folder.

Step 4: Actually, it is already possible to do the above, but in order to ensure success, we can go to the properties of the online neighbor, cancel the default connection of the broadband connection (right-click on the icon), and then restart it as the default connection, so that the computer will start to connect to the network with the broadband connection by default when it is turned on.

Turn it back on. Step 5: After confirming the above operations, delete the "broadband connection" on the desktop, restart the computer, at this time we no longer need to manually run the broadband connection, and wait for the computer to prompt the connection to be successful.

1. First of all, you must set up a broadband connection to ensure that it can be used normally. (Remember to check "Save username and password for the following users").

2. Double-click the broadband link icon again, and when the login box appears, click the "Properties" button at the bottom of the window.

3. Select the "Options" tab in the broadband connection properties dialog box, and remove the "OK" in the checkbox in front of "prompt name, password and certificate, etc." in the dialing option.

4. Drag the broadband connection icon on the desktop to "Start", "Programs" and "Start".

After this operation, every time you turn on the phone, the system will automatically dial up in the background, saving you the trouble of manual operation. However, it is important to remember that the power of the broadband modem must be turned on first.

Turn on broadband, click Settings, there is an option, you can set whether the computer is automatically logged in when it is turned on.

Set up an auto-dial-up connection on power in the following way:

1.Right-click Neighbor on the Net Attribute Right-click Broadband Connection Attribute Left-click "Options" "Dial Options" Remove the tick in front of "prompt name, password, certificate, etc.--OK";

2.Drag the icon of "Broadband Connection" to "Start", "Programs", "Startup", and you're good to go

Win10 automatically connects to broadband methods.

The steps to solve the problem are as follows:

1. Enter the task scheduler in the lower left corner of the screen.

2. Click Create Task.

3. Enter the name Broadband Connection.

4. The setting only runs when the user logs in.

5. Select New in the operation bar.

6. Enter "Rasdial Broadband Connection Broadband Account Name Password", separated by a space in between.

7. Determine the completion of the new task.

8. Restart the computer and the broadband will be automatically connected.

1. Take win7 system as an example, right-click on the network icon in the desktop taskbar and select the "Open Network and Sharing Center" menu;

2. On the page that opens, click the "Change Adapter Settings" button on the left side of the page.

3. In the page that opens, find the broadband connection setting item, right-click it, and select the "Create Shortcut" menu;

4. In the pop-up page, click the "Yes" button to create a broadband connection shortcut on the desktop;

5. Next, click the desktop start menu button and find the "Startup" folder;

6. Right-click the startup folder and select the "Open" menu item;

7. Finally, in the Windows Explorer window page that opens, drag the broadband connection shortcut to the window, and the broadband connection program can be automatically run when the computer is turned on.

1、Network shortcut,If it is the new win7 system just installed,There is no fast way,Then the mouse desktop right button,Find the "personalization" setting,Come out of the following interface,2、Find the left sidebar"Change desktop icon"button,Mouse click,Tick the "network" item,Click OK,Then there is a shortcut icon on the desktop"Network。

5. Next, select the second "Broadband (PPPOE)(R)" in the middle

Summary. Hello, method 1: 1, first turn on the computer, right-click "Internet Neighbors" - "Properties", and enter the "Network Connection" window.

2. Then right-click "Broadband Connection" - "Properties" - "Options", and remove the two options of "Show connection progress when connecting" and "Prompt name, password, certificate, etc.", and then remember to click OK. 3. Then go back to the computer desktop, click "Start" - "Programs" in the lower right corner, and then double-click the "Start" button to open the folder inside the startup. 4. Drag and hold the shortcut "Broadband Connection" on the desktop into the startup folder.

In this way, the broadband will be automatically connected when the computer is turned on.

Hello, method 1: 1, first turn on the computer, right-click "Internet Neighbors" - "Properties", and enter the "Network Connection" window. 2. Then right-click "Broadband Connection" - "Properties" - "Options", and remove the two options of "Show connection progress when connecting" and "Prompt name, password, certificate, etc.", and then remember to click OK.

3. Then go back to the computer desktop, click "Start" - "Programs" in the lower right corner, and then double-click the "Start" button to open the folder inside the startup. 4. Drag and hold the shortcut "Broadband Connection" on the desktop into the startup folder. In this way, the broadband will be automatically connected when the computer is turned on.

Method 2: 1. Turn on the computer, right-click on the computer icon, and select the "Command" option in the options. 2. There will be a console tree on the left side of the window, right-click "Task Scheduler", and then click the option "Create Basic Task" in the menu that opens.

3. At this time, you will enter the "Wizard for Creating Basic Tasks" page, enter any name in the input box, and then click the mouse to enter the next step. 4. Then select "When the current user logs in" on the character trigger page, and then click the mouse to enter the next step. Finally, go to the operation page, select the "Launcher" item, and then you can go to the next step.

5. Then enter [%windir% -d broadband connection] in the program or call this text box and then you can enter the next step. 6. Click "Yes" on the pop-up dialog box, and then click the "Done" button. At this point, the broadband will be automatically connected.

1.First of all, turn on the computer, right-click on "Internet Neighbors" - "Properties", and enter the "Network Connection" window. 2.

Then right-click "Broadband Connection" - "Properties" - "Options", and remove the two options of "Show connection progress when connecting" and "Prompt name, password, certificate, etc.", and then remember to click OK. 3.Then go back to the computer desktop, click "Start" - "Programs" in the lower right corner, and then double-click the "Start" button to open the folder inside the startup.

4.Drag and hold the "Broadband Connection" shortcut on your desktop into the startup folder. In this way, the broadband will be automatically connected when the computer is turned on.

1. Find my computer, right-click the mouse and then manage will appear, we click manage.

2. Find the task scheduler in the management interface, open it, and find Create Basic Task in the menu bar on the right.

3. After creating the basic task, a box will appear, 4. Enter a meaningful and easy-to-remember name in the name field, such as a broadband connection.

5. After writing the name, click Next, then select the trigger on the left, and select the current user to log in.

6. Or select Next, also select Operation in the left menu bar, then select Launcher Program, and then click Next.

7. In the startup dialog box, enter the following content in the "Programs and Scripts" column, "Rasdial broadband connection broadband account name and password", separated by a space in the middle.

8. Confirm the input parameters of the program or script again, click Yes after confirming that they are correct, and then click Finish to create a good scheduled task, 9. When you start the computer and log in to your current account, the broadband connection program has been started.

Enter the task scheduler in the lower-left corner of the screen.

Click Create task.

Enter the name Broadband Connection.

The setting only runs when the user is logged in.

In the action bar, select New.

Enter "rasdial broadband connection broadband account name password" separated by a space.

Confirm that the new task is completed.

Restart the computer and the broadband will connect automatically.