Why can t my computer type things on the web

Plan 1 [New P].

Note [Original]:

1 In safe mode, the effect is even better!

2.All the software to be used below should be installed or upgraded to the latest version to ensure the effectiveness of use.

3.It is not antivirus, and the following methods can be used directly. If it doesn't work, use a high-quality antivirus (e.g. Kaspersky) in safe mode to kill it, and it's best to use 360 Security Guard as well.

Use 360 Security Guard's "Trojan Horse" - Full Scan". Kill and restart. ）

You don't have to use all of the following methods, you can try them one by one. Sometimes, just the first one works.

One. Close the browser, open the "System Repair" of the new version of 360 Security Guard, and select "Home Repair", "System Repair" and "IE Repair" as a tick (you can also select all.) At least select "System Repair"), and then click "One-click Repair".

Too lazy to install it, just use the 360 first aid kit) .

Then use the 360 first aid kit. [Follow the steps: "Start First Aid" first; After scanning, if a Trojan horse appears, click "Isolation"; Then click "Repair" (you can select all of them to Fix Now".

Next, click on "Recover Lost DLL Files", add the missing DLL files that the system detected during detection, and then click "Repair Now". Repair Network is a case-by-case decision to fix or not. When you're done, you should restart.

Two. Scan with 360 Security Guard's "Clean Plugins" to clean up malicious plugins. When you're done, you should restart.

Three. Use Windows Cleanup Assistant (from the web**). After scanning (if you sweep things out, check them all and clean them), then use Fault Repair (select all), and then right-click on the desktop to refresh. Works well in safe mode.

You can also consider using the Kingsoft First Aid Kit [After point scanning, if there are items that can be repaired, after selecting all, point repair can be done. 】

Emphasis ---1In the repair, when there is a prompt in Kill Soft or 360, please click Allow. Restart the computer if prompted to restart during operation.

2.When the effect is not good, look at the three points in "Attention". 3.

After that, if the effect is not good, you can also consider system restoration (choose a restore point).

2. Open the software, click "System Scan", select all the scan results, if you are asked whether to perform the drive cleanup, click "Yes", and then click the "Perform Cleanup" button, if you are asked whether to back up, select "Yes" (just in case, if the system is not abnormal after cleaning, delete the backup), and follow the prompts to operate (if prompted to restart the computer, be sure to restart).

2) Detect and kill malware

Use 360 Security Guard to detect and kill malware, Trojans, and enable surveillance.

These Trojans are tenacious, and you have to be mentally prepared to fight them to the end.

After killing the Trojan, if the fault persists, please use the system's built-in system restore to restore it to the time when you did not have this failure (if the normal mode recovery fails, please boot the computer and press F8 to enter the safe mode and use the system restore).

If the fault persists, use the system disk to repair it, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare the repaired ones.

This situation should be a problem with the browser, try to fix your browser with 360 or Super Rabbit, if it still doesn't work, go to **Windows Repair Assistant to use the functions inside to fully repair the computer, if it still doesn't work, just change the browser to use it.

Sometimes I do that, too.

If Ctrl+Shift doesn't work, try Ctrl+Space.

If that doesn't work, reopen the browser.

Not yet,Reinstall the input method,Or control panel--regional language--details are not good,I'm sorry to tell you,Reinstall the computer,Otherwise, you can go to the shop that repairs the computer from your home!

The input method has an IE add-on.

360 and the like will be checked.

If you uninstall it.

This is the kind of problem that arises.

Generally, there is no way.

Fixed: Only the input method can be reloaded.

But if you have a language bar left with an input method.

The English language has been deleted.

This problem may also arise, and it is recommended to leave one in English.

You can try the following methods to solve the problem:

1. Enter the control panel, region and language options, click Language-Details, and set the Sogou input method as the default language, and you're good to go.

2、Ctrl+Shift+M to open the Sogou menu or right-click the status bar of the input method (**),Input method manager,See what input methods you have installed,Then arrange them up and down in order,Then use Ctrl+Shift to switch out of other input methods,You can use it。

3. In addition, you can also use the "web page cannot be entered" in the computer clinic of 360 to fix it, and you can use it when you go in to fix it.

Input method error!

Control Panel - Regional Language - Details.

Set it up! Or reinstall the IME program!

Right-click on the bottom right corner of the desktop and a column of text will appear, you click on that toolbar and tick that language bar.

Problem Description]:

Web game black screen, white screen, IE caused by the inability to call up flash

Cause Analysis]:

When a flash game fails to run, the flash plug-in may not be called up due to the IE kernel. We tried to test the upgrade and downgrade of IE, and the following is the tutorial of IE downgrade and downgrade Xianglu, easy steps]:

Solution]:

One. IE downgrade. Figure 1, Figure 2

Figure 4, Figure 6, Figure 7, Figure 8

Uninstall IE8:

Figure 9: Locate the uninstall item and click Uninstall.

The Software Manager prompts you to choose to uninstall it anyway

The uninstaller runs automatically:

After the uninstallation is completed, select not to restart, click Done, and the uninstallation is complete.

Hello, I have collected relevant information for you, please plan your trip before you start the 360 security guard First of all, open the homepage of 360 security guards and find it at the bottom right; Labor Service icon, left-click to open the labor service. 2. Then, enter it in the search box above the macro to find the solution; Unable to enter text on the web page" to search for the solution to the problem. 3. Open the first tool solution in the search results, where you can see the symptoms and possible causes of the problem, read carefully to see if it matches the problem you encountered, if it does, click Fix it immediately.

4. You can see that the problem you are facing is being repaired for you, wait for a while for the progress bar to be completed, and wait for the repair of the liquid silver book to be completed. 5. The time to witness the miracle has arrived, the repair is completed, and the cursor of the text box of the web page is normal. Have a great day.

What should I do if I can't enter text on a web page in my computer browser?

Why can't you use Chinese input method on the web page Today when opening the web page, I want to search for something, but the web page cannot enter text, what is going on, today I will bring you two ways to solve the web page can not input text fault.

Method 1, 1You can copy C: Windows System32 from a normal computer and go to the system32 directory of the machine, or you can extract the file from the installation disk.

2.Then open Run in the start menu and type "regsvr32" respectively

and "regsvr32

Just press enter to load.

Method 2, 1, first click the start menu, select the run option, enter "regedit" in the open run dialog box, and press enter to open the registry (the registry is involved here, for security purposes, back up the registry in advance).

2. Then locate the "Hkey Current User Software Microsoft Windows CurrentVersion Explorer CabinetState" item in the open registry, and then right-click the new string value "use".

search

asst”。

3. Then double-click to set the data value to "no", and then confirm to exit the registry.

Hello, when encountering this phenomenon, the following methods can be adopted:

Is your input method not started right,Did you install the Sogou input method?

1)**Google and other browsers to test, if it is easy to use, see**, on**, oo space, or browse other web pages when using this software, these are not using IE as the kernel, and you use IE does not conflict (sometimes it is caused by the browser is not easy to use, I picked it out from multiple browsers in practice, this browser is very famous, because it is not easy to crash, because each web page problem will not affect the entire browser, if you have a problem, please ask me).

If it's caused by a network issue:

2) A Hui group is generally a network, there is a problem with the router when there is a quarrel, you see if the IP and other settings are appropriate, and you don't use the router to try, or unplug the router power and plug it in, or restart the router to try. There is also a problem with the ** and browser that you are on, and sometimes the browser wants to clean up the temporary files. Such a problem,Most likely** itself is a problem.,The browser is not suitable for this network or which station.,And it's time to open this** or QQ space.,Don't open other programs.,For example: