How do you remove the keycaps of a mechanical keyboard? How to disassemble the mechanical keyboard

There are key pullers that can be used.

1. The first is the wire type, press the wire into the gap of the keycap, twist it and pull it up, I highly recommend this kind of key puller, the advantage is that it will not cause any damage to the keycap.

2. The second is the plastic type, the method is the same as that of the wire, but the problem is that the buckle is too small and short, and the operation is inconvenient.

3. The third type, metal key puller, this is basically a gift of brand keyboards, but the shortcomings are too obvious, it is very easy to scratch the keycaps, there are other specifications, but the principle is the same.

The steps to remove <> keyboard are as follows:

1. From the back of the keyboard, remove the cover, and you can see the main control circuit of the mechanical keyboard.

2. You can choose to go directly to the front to remove the steel plate or carefully remove the main control circuit.

3. Turn to the front, the place marked with the five green circles is the screw position, note that the rightmost screw is not consistent with the size of the remaining four.

4. Remove the keycaps, so that you don't have to worry about getting rid of the keycaps during the disassembly process, and the keycaps are easy to keep when you remove them.

5. The steel plate has been disassembled.

The way to remove the keycaps of the keyboard is to pinch the two sides of the keycaps directly with your fingers, and then pull out the keycaps directly outward. When pulling out the keycaps, you need to control the force, do not pull directly and forcefully, it may cause damage to the spring under the keycaps and affect the normal use of the keyboard.

Laptop snap-on fixed keyboards need to unscrew the back screws, and then use the card blind plate to open the buckle. Screw-on keyboards require the keypad markings to be unscrewed, while inline keyboards require tweezers to grip the keycaps and pull them outward.

Precautions. To remove the keycaps of the notebook, you first need to understand the fixing method of the keycaps, there are three main ways to fix the keycaps of the note-traveling state, which are embedded fixed keyboards, snap-on fixed keyboards, and screw-fixed keyboards.

Snap-on keyboards require unscrewing and removing the screws on the back of the notebook, and then priing the buckles open with a hard card. Screw-on keyboards require unscrewing the keycaps from the back of the laptop with the keyboard markings. Embedded keyboards, on the other hand, only need to press down on both sides of the keycaps with tweezers and then pull them forward.

The following gives the method of disassembling the axis of the mechanical keyboard:Materials required: keycap puller, shaft puller, mechanical keyboard.

1. Prepare the two gadgets in the picture below, which are the keycap puller and the shaft puller.

Second, the keyboard needs to remove the keycaps first, and then use the keycap puller to clamp the two sides of the keycaps and pull them up to remove them.

3. Then use the shaft puller, insert the two tips of the shaft puller into the hole of the key shaft, and then pull it up to pull it out.