Seek the introduction of architectural design masters, architectural designers

It's interesting, I'll show you it. But there is only a plan, and you have to find a local foreman to refine it.

I'll give you a suggestion, see that you want to get a design drawing that you are satisfied with and are willing to pay, you had better be a local design institute designer to give you a drawing, of course, not very detailed drawings, because in this way you can express yourself and your intentions to him very well, when doing the design, he will try to save costs according to your intentions to give you the most perfect and economical plan, In addition, here netizens will also have a good design drawing for you, but the construction behind and your local customs and living habits will be unsatisfactory, go to the design institute, I suggest that you try to find a friend who is engaged in construction, of course, it is not excluded that you go to find it yourself, but it is best not to talk about this matter in his unit with great fanfare, you will pay more costs when you rise to the height of the unit, if you are privately looking for a design institute to do this plan and specific construction drawings for you, it will be much simpler, and you can give less labor fees, The villa you want to build is not something that can be built with a single drawing.

In fact, it is best to find a local construction company to give you a specific structural plan and a specific plane functional zoning plan. There is also a space that should be 2 separate homes after 2 sons, and at the same time, family affection must be retained. This should be well planned.

Here are suggestions for reference.

1.In the northern region, it is recommended to set up a door bucket or a cold-proof curtain, otherwise the external audit will not pass.

2.Kum is usually an office building that can only be used as a single-sided corridor, and the corridor is located on the north side; Located in the middle of the length of the position (the deviation point can be) set up a staircase, (a staircase is enough), this length can not make a few houses, the end of the corridor as much as possible to make a room in order to save as much area as possible to make a room.

3.There are too few rooms (this length and area cannot be set up in several houses (about 8 rooms per floor), so the room type should not be too much. Located on the first floor in the north, it is not suitable to open the door directly to the outside (north side).

Because the corridor occupies part of the area, the end is made into a meeting room or room as much as possible to reduce the corridor; There is a conference room on the second floor, and a comprehensive office on the corresponding first floor.

4.It is recommended that the stairs should be long and sprinted, and a barrier-free toilet (net 2x2m) should be made as far as possible under the stairs, and the normal people's toilets should be set up in layers, or the end of the walkway should be set, and the squatting position and urinal should not be too much (one or two can be used to reduce the occupied area). Try not to make a boiling water room, and use a water dispenser for drinking water.

5.There is a barrier-free toilet on the first floor and a barrier-free ramp at the outer door, otherwise the external audit will not pass (do not use the normal toilet squat to be a barrier-free toilet stall, which not only does not save area for this building, but may waste area).

It's only about 400 square meters, how much design can you afford?If the price is right, I can help you draw it.

If you want to take the postgraduate examination of architecture across disciplines, the School of Architecture of the Academy of Fine Arts can be regarded as an option. Every year, many students who do not have a 5-year bachelor's degree in architecture are admitted to this school for a master's degree in architecture. If you are from a civil engineering background, you should have an advantage in the basic knowledge of structure and construction, and if you prepare carefully, you will still have a good chance.

There are only four exams for second-level architects, which is relatively easy, but it is not very useful in big cities, because there are more and more bets now... If you take the first level of the exam, of course, it will be much more difficult.

I think I can get more exposure to construction knowledge during the internship, but the job after graduation can be decided according to my wishes at that time. In the future, if you want to do design, you will eventually face construction problems, and these books are quite difficult to learn, if there are good people to take you, it will be a happy thing.

I have worked in the architectural design industry for 15 years, and with your experience, I would like to give you the following advice:

1. First of all, you have to like the job of architectural design, just to make a living, it is recommended to change careers (reason: architectural design is very hard).

2. Your education is too low, you lack construction-related knowledge, and you don't know what your schematic design ability is, otherwise it is recommended to learn construction drawing design (Botan reason: as long as you guess and sell with your heart, construction drawing design should be faster).

3. The second-level architect is only useful for small design units and small places, but the first-level is more difficult.

4. About architectural design or decorative design depends on your own choice, whether it is because you look at the architectural design to make money quickly, and feel that you should be sure of the decorative design.

Final advice: you are still young, take a long-term view of everything, and make your own life plan is the key. If you enter this industry, you don't have to worry about getting married and having no money!

I came from an architectural design class.

I don't quite understand why you rely on second-level registered architects, it is true that the pass rate is very low, and generally architects will choose to take a direct test, which requires several years of work experience to take the test, (depending on the level of education and working hours).

If you want to be admitted immediately, it is indeed very difficult, I see that you are also relatively small, the role of the second note is not very large, if you want to be attached, it is only 1-2w yuan a year. The main thing is how well you work and how well you have the technical level.

I don't know too much about architectural exterior decoration design, if you like to do architectural design tease, studious and hardworking, and have a strong comprehension, the future is still very good.

My suggestion is that if you are really studious, you can try to take the exam, of course, the chance of passing in a year is too low. You don't have to take that exam to do architectural design, it's useful to take a test. Another point is that my classmate is also from the countryside, so I didn't see that I wanted to get married so early.

None of them have worked out yet, have they?

Level 2 is really not very useful. You can refer to the reference materials I gave for the registration conditions. Architects, as long as you insist on nothing that is difficult to learn, there are many lead masters who are not from a professional class, they also climbed up step by step from the draftsman, as long as they are attentive, even if they are just drawing construction drawings, they can learn a lot of things.

As long as you don't sink into it when you draw construction drawings, and you have to think more and ask more questions when you encounter problems. Interior and exterior decoration is to make money, but it is better to do it together with design and engineering. I'm also a rural Sobi, to give you a suggestion, if you get married in the past two years, you will regret it later, marriage is a shackle, there are too many problems to consider after marriage, let's struggle for a few years, to a stable job, have a higher stable income and then get married, and at that time your taste, vision is not comparable now.

As a peer, advice only.

If you want to take the Architect Gram exam, it is not an ordinary person to wait for the exam, and undergraduate students who have graduated from architecture may not be able to take the exam, let alone you, don't expect too much from yourself.

Everything has to accumulate a certain amount of experience, and sometimes you can't be too rushed

Architectural designer refers to a simple architectural designer, referred to as an architect, including building body design, exterior wall design, landscape design, and interior design. A construction engineer is an engineer who generally refers to various types of work in the construction industry, including electrical, water supply and drainage, HVAC, fire protection, architecture, structure, civil engineering, decoration, etc. Architect 1 cooperates with the project investor (commonly referred to as Party A) and the construction party to realize the construction of the building in terms of technology, economy, function and form.

2.If it is only a crack in the floor slab of the living room, it can basically be judged that it is a local problem of the floor slab;

3 Where cracks appear in the living room floor. If it appears in the middle of the living room, it can basically be judged that it is overloaded or the floor slab is not up to standard; (If the cracks are not controlled during the design, it is possible that the construction is not carried out according to the drawings during construction).

4.Whether the structure of the house has been changed recently, such as removing walls, etc.;

5.Whether the floor (living room) load has been increased recently, such as tiling, etc.

6 .Another point is also a very important point, you say that the age of the house is 7 8 years, then, the house in the design and construction is very likely to use the 87 version of the load code, due to the lack of understanding of the decoration of the house at that time, so the 87 version of the load code for the house is 150kg m, from March 2002 to the implementation of the 01 version of the code increased to 200kg m.

If the above clauses 5 and 6 are true, be careful not to increase the load on the living room when using, and the cracks in the floor slab will not increase and expand significantly.

Under normal circumstances, the foundation stability period of construction engineering products is 20-30 years later, and it is not necessary to encounter special geological conditions.

The problem of cracks in buildings is very complex, and you have provided as much information as possible, but it is still not enough, and it is not good to make an identification without visiting the site. I can only guess for myself.

If the floor tiles are arched and broken, some are hollow and disengaged, that is, the deflection of the floor slab becomes larger (the middle downward bend becomes larger), and the design of the floor slab allows deflection, but there are limited requirements. The floor tiles are paved early, and most of the floor deformation has not been completed.

Can be observed from below the living room, which should be in the basement. Cracks are generally allowed in the design of floor slabs, but there are limitations. The bottom of the slab is clearly visible to the naked eye, and the crack is probably not too small.

It's been 7--8 years, and the deformation hasn't ended, but most of it has been completed, and it will bend down under normal circumstances, but it won't be too big. The danger may lie in the fact that the cracks destroy the protection of the concrete against the rebar, accelerate the corrosion of the rebar, and greatly reduce the bearing capacity of the floor slab, which will collapse at some point.

You look at whether the bottom of the floor slab is plastered, and the plastering cracks may be large. In recent years, the plastering process has been simplified, and the mortar is not prepared and used according to the regulations. Hollowing and cracks have long become a common disease.

Find a stick and knock on the roof of the shed and listen for a bang. If there is, please use an iron drill to gently remove the hollow drum, and further check whether there are cracks at the bottom of the floor slab, how wide, how long, direction, direction, depth, shape, location, etc., of course, please understand that people see the best, so that there are conditions to determine the measures that should be taken.

Solemnly remind that do not do these inspections alone, especially when removing the floor slab, first use a thick bar to support the floor slab, just support it, and do not jack it. One or two people operate, one or two people supervise, observe. to stay safe. Be sure to!

I'm not a master, if I help you, please keep the score for your own use, I want it for nothing, it's useless.