c What is the future of programming in terms of hardware?

It may also be a control data acquisition card or a control card. Of course, there are many more, such as serial communication, or computer CAN communication can be programmed in C. The network is programmed to not necessarily and the hardware has to be managed.

c Hardware programming... There is basically no prospect for this area... Originally, it was used for object-oriented language software, and you had to use it to make hardware, but it was okay, but it was difficult to say about performance, why didn't the hardware learn assembly, and it couldn't fight with C.

Serial communication, that is, you need to program the control hardware on the lower computer (single-chip microcomputer), and c is to tell the lower computer what function to perform through the serial port, how to communicate between them You can define the protocol yourself, such as sending 1 is to turn on the light, 2 is to turn off the light and so on. It's up to you to write this specific protocol.

It can be done with C, which can be controlled by the COM port or HID.

What hardware? What means of communication?

Programming generally has no hardware requirements. A typical computer is sufficient for programming. The difference lies in the level of the programmer, for example, if a senior engineer wants to carry out an engineering program, then he will have certain requirements for hardware, etc.

As for what language to use for programming, if you are more professional, it depends on the language requirements you have when you program specifically. For example, in a project, it is easy to manipulate the hardware in assembly language, and so on. Different languages all have their strengths.

We all know that there are better ways to solve problems, and programming is the same.

In fact, programming does not have high requirements for hardware, 2G memory is enough, and 1G is actually enough. Language, it's up to you, like that one and use that.

Ordinary computers are OK. 2G memory, ordinary dual-core CPU, it is recommended to be inter, programming algorithms, inter computing power is faster.

If the conditions are possible, it is recommended to use 2G CPU to have a dual-core one, like VS2005, 2008 are very memory-intensive.

This allows programmers not to care about the underlying CPU architecture.

It may be the benefit of learning C, and I am more concerned about the bottom.

The biggest advantage of C is that you don't have to care about the bottom layer, you just need to concentrate on doing your business well, and all memory management, CPU and so on are all done by the net framework for you, which greatly improves development efficiency, not to mention that it is an object-oriented language, attaches importance to reuse, and can improve development efficiency.

The information you checked is correct. It is a net piece application, mainly for the web side.

C can be distributed, but the performance should be worse than C and C++.

With VS2005 will do. Yes is needed. net。It is recommended to buy a machine with Windows Mobile operating system (mobile phone, PDA), for VS, it is a Pocket PC

Yes, the question is very deep, and it seems that I have learned very shallowly.

As long as the hardware provides the appropriate programming interface.

No programming interface is provided, and any language is useless.

What you said upstairs makes sense, what programming interface does your hardware give?

It's so difficult to use C to make a WinForm interface.,Use VS2008.,Drag a few controls.,Buttons or something.。

Your WinForm program runs on top of the operating system, so your hardware should think about how to send information to an operating system, and then think about how the C program receives data from the operating system. c The program cannot read the data of the hardware directly.

This is the application interface that you need to get to the external device (LED or light bulb), which can be lit when called, and if you don't have it, you can only write it yourself.

In the program, you only need to call this interface when it is abnormal.

Light bulbs do not have this function

This kind of can only design the circuit board, print, and make the integrated module by yourself.

First of all, whether it is software or hardware, it is actually a problem of software. Most of the hardware just solidifies the program, or shows the function of the program, and if you don't understand the software, the hardware is difficult to do well. Moreover, the programming language is your hand in the work of the computer, even if you don't do it in the future, you can still write a small program to bring convenience to yourself or your friends.

In addition, if you really have no interest, or no talent in this area, then you can not learn to be proficient, but some basic concepts must be mastered.

Secondly, choosing a major, I think it depends on your own personality, whether you can calm down and study or go out to communicate. Software development, because software must be used by people, most developers need to communicate with users, understand what users need, and how they can write programs to meet user needs. From this point of view, marketing and management can be relied upon.

The combination of software and hardware is most of the time against the machine, although if it can be successful, the salary is also very high, but one is to be able to calm down to study, debug again and again, record. FYI. You can go to 365testing for further communication!

Calling a function in another Dll written in C++, why does the program automatically call up the main page when it executes to the place where this function is called?

Because c needs. .NET library support,.net cannot be run directly under the hood.

In addition, C's programs involve object monitors, complex exception handling, and so on, and the compiled programs are bound to be huge. And the drive needs to be fast and direct.

Another point is that drivers are more process-oriented, so a process-oriented language like C is a good fit. However, C is object-oriented and is more suitable for development such as project applications.

The landlord,..net is powerful, but it's a high-level language! So for writing drivers, you have to have the vendor pre-install them in the hardware.

.NET framework! So this is not very realistic at all, in the current situation.net can do a lot of other things, but it must have a framework to support it!

So the landlord's wish may have to wait for some time.