How do you calculate the floor of this type of building? What are the rules for calculating the numb

In terms of design, the division of floors is layered according to the floor structure, and a floor is designed by drawings.

Below is the store, the single-storey height is higher (in fact, in the design, if the lower floor is also a residence, the floor height is usually higher than the top), which is considered a first floor, and the upper floor is a second floor.

If you calculate on a budget, you'd better go to your local construction bureau or quota station for advice, as the calculation rules are different from place to place.

According to my understanding, the store below, the residence on the first floor above is counted as the second floor.

If the floor height of the door point below is relatively high, some people can add a floor slab, and the separated space can only be regarded as a mezzanine, not a natural layer.

Addendum: The natural layer refers to the space above the height of the floor and the space above the residential meter belongs to the natural layer (I can't remember the data clearly, but the data should not be much different).

Definitely not right.

1. If the original has seven floors and the new one has only six floors, then the original seven-story residents will not be allowed to live on the top of the new building.

2.To use an analogy: if the residents on the second floor of the old building have their own stores under the floor slabs, and go to the new building, do they want to dig the stores of the old building below the ground?

In short, if I were a resident on the second floor of the old building, I would say: if the developer calculates by floor, then I ask for a store under the floor of the new building, and my residential floor is meters from the ground, so I can live on the first floor of the new building, but it is required to be meters from the ground, not directly from the surface.

In short, there are a lot of things to do with developers in China for houses. If you can't do it, you can be a "nail household", hehe!

If there is only 1 floor of the commercial building at the bottom, the first floor of the upper floor should be counted as the 2nd floor.

The shop is counted as the first floor, and the shop is on the second floor, and my house is like this. My house is on the 3rd floor.

Living in a building (according to the ordinary old-fashioned house, that is, the 6th floor), which also has a dangerous safety division, measuring the safety degree of each floor, we call this measurement the measurement of the floor factor, in which the safety degree of each floor is called the floor factor.

Generally speaking, the 3rd floor is the best, and the floor coefficient is; 2nd floor, 4th floor, the floor coefficient is; The 1st floor and 5th floor have a floor coefficient of 1, which is equal to none; The 6th floor has a floor factor, so the 6th floor is the cheapest.

In fact, based on this principle, we can know that in general, the higher floors have a lower safety factor, and the more middle the floor, the higher the floor coefficient.

Calculated according to the natural floor, regardless of the use.

The regulations are as follows: 1. When the floor height of all floors of a residential building is not greater than that, the number of floors shall be calculated according to the natural number of floors.

2. When the residential and other functional spaces are in the same building, the number of floors of the residential part should be superimposed on the number of floors of other functional spaces to calculate the number of floors of the building.

3. Overhead layers and equipment layers with a floor height less than are not included in the number of natural layers.

4. Semi-basements that are higher than the outdoor design ground and smaller than are not included in the number of natural floors above the ground.

Number of floors of the house: 1. The number of floors of the house refers to the natural number of floors of the house, which is generally calculated according to the indoor floor above 0.

2. The lighting window is in the semi-basement above the outdoor floor, and the indoor floor height is above (if it is not included, the number of natural floors is calculated. The total number of floors of a house is the sum of the number of floors above ground and the number of floors underground.

3. False floors, attached floors (mezzanine), intercalations, attics (dark floors), decorative towers, as well as stairwells and water tanks protruding from the roof are not counted in the number of floors.

4. The total number of floors of the house, the total number of floors of the house is the sum of the number of floors above ground and the number of floors underground.

5. The number of floors where the house is located refers to the level of the house, and the number of floors above the outdoor floor of the lighting window is expressed by the natural number, and the number of floors underground is expressed by a negative number. The number of floors of the house with a floor height of more than meters (inclusive) is calculated.

Precautions: 1. Pay attention to the layout and orientation of the house. Due to the characteristics of high-rise residential cast-in-place concrete and frame scissor walls, the rooms cannot be opened up, and the layout of the house is not easy to change.

2. Pay attention to the total number of households and the number of elevators in the whole building, as well as the quality of elevators. The higher the level and the more apartment types, there should be a few more elevators.

3. Pay attention to whether the water pressure of the "secondary pressurization" ** tap water method is sufficient. In particular, there will be a water outage during the peak summer water consumption period.

4. Pay attention to the future planning prospects of the surrounding area. One of the major advantages of high-rise residential buildings is that they have a wide field of vision, good landscape and fresh air.

5. Pay attention to the property management in the building. Due to the large number of high-rise residential passages, special attention should be paid to the safety and security of the tomb.

Water : 1 and 6 water numbers. It is black and blue. It is of the wave type. It is a low-rise wavy house.

fire : two or seven fire numbers. red and purple . It is a pointed and tall type. It is a tall building.

Genus Wood: Three or eight genera of wood. It is cyan and green. It is a high type. It is a tall and long building.

Genus Gold : Four or Nine Genus Gold Numbers . It is white and golden. It is round . It is a low- and medium-rise round house.

Soil: 5 or 10 Soils. It is brown and brown. It is a broad type. It is a medium-high, rectangular and wide building.

3. What floor is your Five Elements suitable for living on? It can be estimated by the five elements of the genus and the floor.

Summary. The ** of each unit type is based on the difference between the vertical position (floor) and horizontal position (position in the first floor) of each unit and the different orientation, lighting, ventilation and so on of each unit type (the coefficient of course is high for the house type with good orientation and good location), and then multiply the average price and coefficient of the proposed building to obtain the ** per square meter of each household, and then multiply it with the area of each household to obtain the total price of a household. Therefore, when you choose a house, you will use the "average price" **, and you will not be able to buy your own suitable house.

Hello. The ** of each unit type is based on the difference between the vertical position (floor) and horizontal position (position in the first floor) of each household, as well as the different orientation, lighting, ventilation, etc. of each unit (of course, the coefficient of the house type with a good orientation and good location is high), and then multiply the average price and coefficient of the proposed building to obtain the ** per square meter of each household, and then multiply it with the area of each household to obtain the total price of a household. Therefore, when you pick a house and balance the stove, you will use the "average price" **, and you will not be able to buy your own suitable house.

The floor area of the house = the floor area of the suite + the shared common floor area.

The floor area of the house and the common common floor area of the house are the total floor area owned by the owner of the house, and they are also the two major elements of the house at the time of ownership registration. The building area of the house refers to the construction area occupied and used by the right holder of the house alone, which is composed of three parts: the use area of the stool house, the area of the wall in the set, and the construction area of the balcony in the fan source of the set.

The apportioned common common construction area refers to the part of the construction area that should be shared by the owners of the property rights or used by the owners of the property, including: elevator shafts, pipe shafts, stairwells, garbage chutes, substation rooms, equipment rooms, public foyers, corridors, basements, guardhouses, etc., as well as the construction area of public buildings and management rooms serving the whole building, calculated by horizontal projection area.

The common floor area also includes the partition wall between the set and the public building, as well as half of the horizontal projection area of the exterior wall (including the gable). Independently used basements, carports, garages, guardhouses serving multiple buildings, management rooms, and basements used as civil air defense projects are usually not included in the common construction area.

The floor fee is mainly charged according to the height of the floor

Elevator room: The elevator room generally does not charge floor fees, according to the first yuan to calculate, if the object is very heavy, or the value is high, you need to charge an additional fee;

Floor room: The floor fee of the floor room is calculated according to X-1 (X is the floor), generally at 40-50 yuan floor, and special items will be negotiated.

The contact with the ground is a layer of ground, the following is the minus 1 layer, and then the next is the minus 2 layer, and then the first layer above the ground is a layer, and then the upper layer is the second layer, and so on 1 10 layers, 20 layers, and 30 layers.

The floor area of the house = the floor area of the house + the shared common floor area of the house The floor area of the house and the shared common floor area of the house are the total floor area owned by the owner of the house, so this is the case.

1. The construction area (refers to the peripheral horizontal projection area of each floor above the foot of the external wall (column) of the house) is 90 square meters and below, and the total horizontal projection area of various balconies (calculated by the balcony floor) is not more than 12 square meters; The construction area is 90 square meters - 140 square meters, and the total horizontal projection area of various balconies does not exceed 15 square meters; Residential units with a construction area of more than 140 square meters, and the total horizontal projection area of various balconies shall not exceed 18 square meters. 2. If the depth of the inner balcony and composite balcony (the distance from the outer edge of the main structure to the vertical extension of the interior) is not more than meters, half of the construction area shall be calculated. If it exceeds the meter, the excess part shall be calculated as the entire construction area.

When the depth of the unenclosed balcony (the vertical distance from the outer edge of the balcony to the outer edge of the main structure) is not greater than meters, the construction area is not calculated; When it is larger, half of the floor area is calculated. 3. If it is a ladder with two or more households, the common wall part must be half of one person, or more than one person sharing the wall area. For example, if there are two households on one ladder and the wall is 24cm thick, then each person can share 12cm when calculating the area.

Then there is the shared area, which is the stairwell, elevator room, common corridor, etc. To put it simply, if there are two households on one ladder, the floor area is 200 square meters, and the house type is exactly the same, then the building area of the house is 100 square meters, which already includes the shared area. 4. The balcony area of affordable housing and low-rent housing can refer to the house type standard with a construction area of less than 90 square meters.

When the state provides otherwise, follow those provisions. Calculation range of construction area 1, a single-storey building is calculated according to one floor regardless of its height, and its construction area is calculated according to the outer horizontal area above the foot of the external wall of the building. If a single-storey building has some floors, the gross floor area should also be calculated.

2. For single-storey buildings with high and low spans, if the construction area needs to be calculated separately, when the high span is a side span, the construction area shall be calculated according to the horizontal length between the outer surfaces of the gables at the two ends above the leg multiplied by the horizontal width of the outer wall surface above the leg to the outer edge line of the middle column of the high span; When the high span is a middle span, its construction area is calculated by multiplying the horizontal length between the outer surfaces of the gables at the two ends above the leg by the horizontal width of the outer edge of the middle column. 3. The construction area of a multi-storey building is calculated according to the sum of the construction area of each floor, and the ground floor is calculated according to the peripheral horizontal area above the foot of the outer wall of the building; The second floor and above are calculated according to the horizontal area of the outer perimeter of the external wall. 4. The construction area of basements, semi-basements, underground workshops, warehouses, shops, underground headquarters, etc. and the corresponding entrances and exits shall be calculated according to the horizontal area of the periphery of the outer wall of its upper mouth (excluding the lighting well, moisture-proof layer and its protective wall).

It takes a lot of money to buy a house, which involves the calculation of the area of the house, which is a professional problem, and it is usually difficult for the average consumer to distinguish and clean up. The above introduced to you how to calculate the construction area, as well as the calculation range of the construction area, etc., but they are all basic knowledge, which can only be used as a reference for you.

The building area is one of the important indicators to check the investment effect and assess the physical image and the production results of construction enterprises. The floor area of a house is the sum of the floor area of each floor, including the basement area. At the same time, single-storey houses are counted as one storey, regardless of their height.

The formula for calculating the construction area and usable area is: construction area = building area in the suite + shared area = construction area Pooled coefficient pooled coefficient = total shared area of the building Total building construction area in the suite building area = usable area in the suite + wall area in the suite + balcony area.

According to the principle of calculation rules, the part that does not receive benefits is not calculated as the construction area, and under normal circumstances, if it is determined that it is not used, the construction area is not calculated. However, developers often take advantage of this loophole, depending on your actual situation, if it is obviously a deliberately closed part that is available for use, the floor area should be calculated according to the calculation rules. For example:

If you fill the underground space with backfill, you definitely don't need to calculate the floor area, and the attic can't be used if there is no path to reach it, and you don't need to calculate the area.