How to remove stain from tiles 10

<>2. Next, prepare a bottle of 84 disinfectant.

3. Then spread a paper towel on the part of the tile dyeing first.

4. Then pour an appropriate amount of disinfectant on the paper towel.

5. The disinfectant can be left to stand for about a day after soaking the paper.

<>7. Finally, you can see that the staining on the tile is cleared, as shown in the figure below.

Wipe with oxalic acid solution, or use toilet cleaner (in fact, dilute hydrochloric acid) can be used. However, if the tile does not have a glossy surface, the color will seep into the inside of the tile, which is not easy to do.

You can use a toilet cleaner to clean it first, if it can't be cleaned up, it means that the color has penetrated into the tile, I have tried oxalic acid can not be completely cleaned. You can go to the supermarket and buy bleach, the kind that does laundry, it's cheap. In my own experience, the tiles were dyed by the children's plastic balloons, and the colored areas were covered with wet wipes, and bleach was poured on the wet wipes for one or twenty minutes to completely remove.

Buy a pack of "Dirty Chicken Clean" (I don't know if it's sold now), and you can get it with the white one (brush it directly or dissolve it in a little water); Or go directly to the chemical store to buy an appropriate amount of "oxalic acid" (as concocted).

It's going to be hard, because the molecules are already concentrated in that place, and it's more troublesome.

If you seep in, there is no other way but to find a repairman.

It is better to use sprinkle essence, or you can use boiling water and soap powder to add dish soap.

If you find that the surface of the tile in your home is stained, you should first find out the reason why the tile is dyed to prevent the further expansion of the staining range. Check how the condition of the tiles with the dyed part is, if the dyeing area is not large, we can deal with it ourselves, if the dyeing range is too large has affected the overall effect of the decoration, it is best to find a professional decoration team to deal with it.

The reasons why tiles are dyed are often the following, the first is the stain formed by the daily tea and oil droplets splashed without timely cleaning, the second is dyed by some rust mortar, etc., and it is polluted by ballpoint pens, ink, etc., and the treatment methods of these stains are different.

Generally, we can wipe with alcohol or banana water, first soak the rag with alcohol, cover the dyed tile, let it stand for 5-10 minutes and then gently wipe the stained position, one time may not be completely removed, you can try several times. Alcohol is safer than banana water, and you should be careful to avoid wood products when using banana water.

If it is a large area of staining, you can first mop it with a mop, clean it with soapy water or dish soap with alkaline detergent, and tea or beer stains can be scrubbed with soda ash water, which can be easily erased.

Rust and mortar are more difficult to clean, if you want to remove the sulfuric acid solution or hydrochloric acid solution, you need to do a good job of protection when using, wear rubber gloves, and be very careful when operating, hydrochloric acid and sulfuric acid are strong acids, and accidentally drip on the clothes will burn a hole. We drip the sulfuric acid on the surface of the stain and let it sit for a while before wiping it, and the rust and mortar can generally be wiped clean.

Paint and ballpoint strokes can be applied with turpentine on the tile, using turpentine to dissolve the oil can have a good stain removal effect, if there is no turpentine at home, you can also try to wipe it with toothpaste, it also has a certain effect.

Stains stained with soy sauce and vinegar on kitchen tiles can be easily washed off with Toilet Cleaner, and the same effect can be achieved with 84 Disinfectant if there is no Toilet Cleaner.

You can wipe it with wind oil essence, so that you can remove the dirt on it, and the effect is better.

You can use hot water and dish soap to remove these things, the effect is very good, and the cleaning is very clean.

It can be scrubbed with some gasoline, which can generally be removed, depending on the dyed item, so that you can choose the right thing.

You can use detergent, baking soda, or vinegar, you can master the way to clean up, understand the situation of the staining substance, and choose the right way to clean up.

<>2. Next, prepare a bottle of 84 disinfectant.

3. Then spread a paper towel on the part of the tile dyeing first.

4. Then pour an appropriate amount of disinfectant on the paper towel.

5. The disinfectant can be left to stand for about a day after soaking the paper.

<>7. Finally, you can see that the staining on the tile is cleared, as shown in the figure below.

The tile is stained with color and removed with the following method:

1. Use professional cleaning agent to decompose the pigment components that penetrate into the interior of the floor tile by chemical decomposition method, there is no bad smell, the surface medium can be cleaned thoroughly, and the original gloss color will be restored after cleaning.

2. Clean the place, put more water on it, see if the water can seep into it and not dilute it into the lead and bricks of the limbs, talk about it, if it doesn't work, replace the water with 84 of the agitation, put more, see if it can decompose the color inside, if the calendar is not good, then the best solution is to spend some money, let the division pay to knock off the new bricks.

1. Use floor cleaner, floor staining is more stubborn, and it will be more effective to use floor cleaner.

2. Soapy water and rags to clean the floor tiles, soapy water has a good cleaning effect and can remove staining.

3. Clean the tiles with hydrogen peroxide, wipe them with a cotton swab during use, and it will be cleaner.

4. Toothpaste removes tile staining, toothpaste has a whitening effect, and can achieve the effect of decontamination and discoloration of ceramic tiles.

Ceramic tiles, also known as tiles, are refractory metal oxides and semi-metal oxides, which are formed by grinding, mixing, pressing, glazing and sintering through the process of grinding, mixing, pressing, glazing and sintering, and are used to form a kind of acid-alkali resistant porcelain or stone, building or decorative materials, called ceramic tiles. Its raw materials are mostly mixed with clay, quartz sand and so on. The history of ceramic tiles should be traced back to BC, when the Egyptians began to use tiles to decorate various types of Li Yu's houses.

Clay bricks are dried in the sun or baked and then colored with a blue glaze extracted from copper.

If the tile is dyed, it can be treated with floor cleaner, soapy water, toilet cleaner and other detergents, and the tile can be completely cleaned by using a towel or brush dipped in an appropriate amount of floor cleaner or soapy water and toilet cleaner, and constantly brushing the stained parts of the tile.

If the floor is stained, it can be treated with a special floor cleaner. Usually, the color stained on the floor will be stubborn, and you can use a brush dipped in floor cleaner to continuously scrub the stained parts, which can effectively remove the stain on it.

When the tile has just begun to be dyed, and the color glue on it has not completely solidified, you can use a rag dipped in soapy water to scrub the dyed parts continuously, and the soapy water has always had a good cleaning effect in removing dirt, and the dirt on the tile can be cleaned off.

When the stain on the tile is stubborn, you can also try to clean it with the toilet cleaner, which is much stronger than the general detergent to remove dirt and scale. Pour the toilet cleaner on the part of the tile stained locust and brush it repeatedly with a brush until the tile is completely cleaned.

Tile staining is treated with detergent.

1. Use floor cleaner for stubborn floor staining.

2. Soapy water and rags to clean the floor tiles, soapy water has a good cleaning effect and can remove staining.

3. Clean the tiles with hydrogen peroxide, and wipe them with cotton swabs during use.

How to remove the color of the floor tiles:

Material preparation: laundry detergent, flour, white wine, white vinegar, watering can, scouring pad.

Step 1: Pour an appropriate amount of laundry detergent into the watering can (laundry detergent has a good cleaning and stain removal effect).

Step 2: Then pour the liquor into the watering can (liquor is water-soluble, which makes the solidified pigment water-soluble).

Step 3: Then pour an appropriate amount of white vinegar into the watering can (white vinegar contains acetic acid, which can break down the solidified pigment).

Step 4: Then pour an appropriate amount of flour into the watering can (flour can absorb water-soluble pigments).

Step 5: Screw the lid on the watering can and shake the laundry detergent, flour, liquor, and white vinegar by hand evenly.

Step 6: Use a watering can to spray the tiles and carefully wipe the colored parts of the tiles with a scouring pad.

Step 7: The color on the floor tiles has been cleaned.