Is it true that the Nanhong bracelet is beaten with a lamp? Or is it roasted?

Updated on collection 2024-03-01
5 answers
  1. Anonymous users2024-02-06

    Turn on the lights and look at the comparison, if it is similar, then it is 100% sure that it is a baked fake southern red.

    Baked fake southern red.

  2. Anonymous users2024-02-05

    After hitting the Nanhong bracelet with a lamp, you can see the texture, texture, bubbles, and fluorescence reaction of the Nanhong bracelet. However, these characteristics alone do not determine the authenticity of the southern red bracelet or whether it has been roasted.

    To determine the authenticity of a Nanhong bracelet, a number of factors need to be considered, including but not limited to the following:

    1.Observe the texture of the southern red. The texture of southern red agate is usually more delicate, and the light transmittance is weaker after lighting, while the burnt southern red agate is relatively better light transmittance.

    2.Pay attention to the color of the southern red. The color of southern red agate is usually bright and unevenly distributed, while the color of burnt southern red agate is usually too bright and bright, and the distribution is relatively even.

    3.Observe the texture of the southern red. The texture of southern red agate is usually more natural, showing a natural flowing shape, while the texture of burnt southern red agate is relatively dull.

    4.Check the bubbles of the southern red. Tiny bubbles are usually present inside southern red agate, while there are no bubbles inside burnt southern red agate.

    5.Observe the fluorescence reaction of Nanhong. Southern red agate usually does not fluoresce under violet light, while burnt southern red agate may fluoresce.

    To sum up, to determine the authenticity of the southern red bracelet or whether it has been baked, it is necessary to consider a number of factors and conduct a comprehensive analysis. The characteristics observed by the lights alone do not lead to a final conclusion.

  3. Anonymous users2024-02-04

    The matte (matte surface) south red disc play effect is the best. Because of the polishing of the machine, it is difficult for the sweat and oil of the human body to enter. Short-term handicap play, there will be basically no change.

    The matte face of Nanhong can accumulate some sweat and oil, which can help speed up the pulping of the beads. Therefore, the frosted surface of the southern red plate is much easier to play, and it is enough to get started directly, and the changes in the beads are also more obvious.

  4. Anonymous users2024-02-03

    The light is good.

    There are two kinds of transparent and opaque in Nanhong, and it is necessary to have fewer beneficiation points and uniform internal texture, and it is also necessary to choose pure natural to prevent glue injection. Southern red agate can be seen under the light of small particles of cinnabar dots, this is the southern red agate unique to the slow, transparent or pure white envy of the southern red agate jade texture and gelatinous texture is also generally agate does not have. The question of whether to be transparent or not depends on what you like.

    If Nanhong is not lit, you can roughly feel slightly transparent, semi-transparent, and fully transparent when you look at it only in natural light. In fact, professional merchants or experienced players are not only to identify whether it is transparent or not, but also a necessary means to judge the uniformity of the texture of the material and the cracking. If it is not a rough stone with stone skin, the natural light can distinguish its nature and color from the surface moisture, and as for the light transmittance, it is certain.

    For the full meat and very dense material, if you just look at the natural light, you can only judge whether the color is correct by experience, whether the surface characteristics of the material are moist or dry, and its light transmittance is not felt, even if you use an ordinary flashlight or a jade special flashlight, if you are inexperienced in the use of electric appliances or the lamp head does not adhere to the material, it will also lead to your own inability to perceive the light transmittance.

    But in fact, where the nature of Nanhong agate, even if the texture of the material is dense, it must be translucent, just look at the lighting techniques and insights are very professional, not very familiar with Nanhong friends as long as you carefully look at the landlord's demonstration of lighting to see the material, the flashlight lamp head is close to the red halo around the material, you can clearly distinguish whether the light is transmitted.

  5. Anonymous users2024-02-02

    Southern red agate, red color, warm texture, set ornamental, wearing, collection of value in one, by many friends love, especially the bracelet made of southern red agate, is beautiful and amazing. Such a precious and beautiful cultural jewelry naturally needs careful care. When maintaining the Nanhong bracelet, you must pay attention to the following 6 matters to avoid damage to your beloved Nanhong bracelet.

    1.Do not collide with hard objects.

    The hardness of southern red agate is not high, low is not low, about between, if you usually wear it carefully, it doesn't hurt, but it is easy to break if it is violently hit or bumped, if it is damaged, it not only affects the integrity, aesthetics, but also affects its value, therefore, it is best not to collide with hard objects, and it is best to place it in a soft collection box when not wearing.

    2.Pay attention to cleaning and maintenance.

    Nanhong can be cleaned with clean water, and it needs to be wiped with a soft cloth after cleaning.

    3.Avoid high temperatures or too cold and too hot.

    Regarding high temperatures, no jewelry and jade are willing to accept high temperature exposure, and Nanhong agate is no exception, in addition, it is also necessary to avoid excessive temperature difference, too cold and too hot, resulting in cracks or discoloration on the surface of Nanhong.

    4.Try to avoid contact with items such as chemical reagents.

    Chemicals can corrode the surface of the red and affect its vividness and brightness. Try not to wear it when bathing.

    5.Wipe with a soft cotton cloth or towel.

    When wiping Nanhong Agate, use a soft cotton cloth or towel, which will help maintain and maintain the original quality of Nanhong. Avoid scratches.

    6.Frequent hydration is required.

    If you store it for a long time, remember to replenish water or apply a thin layer of oil on the surface, such as baby oil, olive oil, etc., to maintain the balance of moisture in it.

    The shopkeeper reminds everyone again, If you want your Nanhong bracelet to be beautiful forever, you must pay attention to the above points when playing and maintaining, so that your Nanhong will become more and more beautiful!

Related questions
2 answers2024-03-01

People born in the Year of the Rooster entered the Year of the Goat in 2015, and their work was generally smooth, but in 2015, there were relatively many changes, and personnel were more unstable. In addition, 2015 was a busy year with relatively many opportunities for business trips. Only by creating opportunities in the busy, accumulating experience and contacts, it will be of great help to future earnings. >>>More

6 answers2024-03-01

Wear a glove plate, at the position of the thumb of the glove, a little silicone oil slowly plate (of course, you can also wax, a thin layer of uniform is good, the beads will look smoother, but also wear a glove plate, you can suck off the excess wax oil). Put it in the bag to play, put the bracelet into the cloth bag, slowly and evenly rub it, pay attention not to use too hard, this will cause damage to the hand string, and you can stick to it every day. >>>More

9 answers2024-03-01

East. Zheng, the root carving believes that the main reasons for the cracking of Huanghuali beads are: >>>More

5 answers2024-03-01

Yabai bracelet playing steps and precautions:

String the beads in a bead bag and gently knead each bead. Rub it when you have time, stop when you don't have time, and let it be. Be sure to coil around the bead orifice. After a few days, the beads are glazed and ready to wear. Be careful to put it in a sealed bag and cover it after each plate. >>>More

9 answers2024-03-01

Generally, this is fine, but if it is particularly rare, there is a more targeted plate method. >>>More