How to eliminate the maintenance light of Suzuki Tianyu SX4

1. First press the start button to start the Suzuki Sky Whisper SX4 vehicle.

2. The following needs to take a look at the dashboard of the Suzuki Tianyu SX4 vehicle, and maintenance tips will appear.

3. Press the SET button on the steering wheel of Suzuki Tenyu SX4.

4. Press the SEL button on the right side of the Suzuki Tenyu SX4 steering wheel again.

5. Press the cancel button on the steering wheel of Suzuki Tenyu SX4 again.

6. In the end, Suzuki Tianyu SX4 completed the maintenance of the lamp to zero.

Suzuki Tenyu SX4 Maintenance Tips Reset to Zero:

1. Close the hood. Open the hood to an upright position and close it again.

2. Close all doors and trunk lids.

3. Insert the ignition switch into the key and rotate to the first gear (keyless start: do not step on the brake, press the ignition switch to position 1).

4. Press the page up and down button on the left side of the steering wheel to the odometer (i.e. adjust to display the total mileage) to appear on the multi-function display.

5. Press the left and right page turning buttons until the Itinerary option appears, and the display will last for 5 seconds.

6. Press and hold the ** button first, then press and hold the OK button within 1 second, and hold for 5 seconds, the multi-function display will appear in the workshop menu "Vehicle Data, Roller Test, Assyst Plus.

7. Select "ASSYST Plus" and press OK to confirm.

8. The multi-function display screen shows "service data" and "full service" options.

9. Confirm the relevant maintenance data.

The maintenance reminder light can not be cleared by the computer (detector), it can only be removed manually (there is a specific method), the method is very simple, it is recommended that you go to the 4S store to clear, free, just a few minutes.

The elimination of the maintenance indicator is to reset to zero, and there is no need to go to the 4S store, which is not an old technology. Here's how to do it.

1) Turn on the ignition switch, and the lower right area of the LCD display will display "oil" for 5 seconds.

2) Press the select button within these 5 seconds and continue for more than 5 seconds;

3) At this time, the lower right area of the LCD screen will continue to display "oil" after flashing "oil" for 1 time;

4) After completing step 2), let go of the select button and press the select button 5 times in a row within 2 seconds, and the operation must be completed within 3 seconds.

5) When the above operation is successfully completed, the lower right area of the LCD screen will flash "oil" at a frequency of 1Hz for 3 times, and then turn off the display of "oil" and the alarm light.

Insert the key, hit until the instrument light is on but does not start, press and hold the right adjustment lever for 5 seconds within 3 seconds of the instrument panel is lit, and press the right adjustment lever for 5 consecutive times when the oil light is flashing.

Changan Suzuki SX4 Tianyu maintenance lamp zero method: you can go to the 4S store and let them help you zero it; Or follow some steps to zero.

Changan Suzuki SX4 Tianyu maintenance lamp zeroing operation steps:

1.Turn on the ignition switch, and the lower right area of the LCD screen of the instrument cluster will display "oil" for 5 seconds;

2.Press the select button within these 5 seconds and continue for more than 5 seconds;

3.At this time, the lower right area of the LCD screen will continue to display "oil" after flashing "oil" once;

4.After completing the second step, let go of the select button and press the select button 5 times in a row within 2 seconds, and the operation must be completed within 3 seconds;

5.When the above operation is successfully completed, the lower right side of the LCD screen will flash the display of "oil" at a frequency of 1hz for 3 times, and then turn off the display of "oil" and the alarm light, and you can do it.

The maintenance light is on because the vehicle has reached a service interval of three months or 5,000 km or after the interval mileage needs to be serviced regularly.

Suzuki Tianyu SX4 two-year owner,I don't know how to solve a problem recently,The last time Changchun maintenance was maintained by myself in a repair shop outside,But how to reset its maintenance light to zero? Suzuki Tenyu SX4 ( Check price |.)Model details of the two years of car owners, recently encountered a problem do not know how to solve, the last maintenance is their own outside to find a repair shop to maintain, but its maintenance light how to zero? Zeroing operation, take away no thanks:

1. Close the hood. Open the hood to an upright position and close it again. 2. Close all doors and trunk lids.

3. Insert the ignition switch into the key and rotate to the first gear (keyless start: do not step on the brake, press the ignition switch to position 1). 4. Press the page up and down button on the left side of the steering wheel to the odometer (that is, adjust to display the total mileage) and carry the item to appear on the multi-function display.

5. Press the left and right page turning button until the Stroke option appears, and the display will last for 5 seconds. 6. Press and hold the ** button first, then press and hold the OK button within 1 second, and hold for 5 seconds, the multi-function display will appear in the workshop menu "Vehicle Data, Roller Test, Assyst Plus. 7. Select "ASSYST Plus" and press OK to confirm.

8. The multi-function display screen shows "service data" and "full service" options. 9. Confirm the relevant maintenance data. 1.

First, turn on the ignition switch of the Suzuki Swift. 2.Then press and hold the indicator selection button on the right side for more than 5 seconds, and the gauge display will flash "oil" 1 time before continuing to display "oil".

3.Let go of the indicator light selection button and press the button 5 times in a row within 2 seconds. 4.

oil" flashes 3 times and then goes off, and the reset operation is completed. @2019

Summary. Hello, the steps to eliminate the Tianyu SX4 maintenance light are:

1. Turn on the ignition switch of the Suzuki Swift;

2. Press and hold the indicator light selection button on the right side for more than 5 seconds, the instrument display will flash "oil" once and then continue to display "oil";

3. Let go of the indicator light selection button, and press the button 5 times in a row within 2 seconds;

4. "oil" flashes 3 times and then goes off, and the reset operation is completed.

Hello, Tianyu SX4 maintenance lamp to eliminate the hail of the shed is: 1. Turn on the ignition switch of Suzuki Qi Swift; 2. Press and hold the indicator light selection button on the right side for more than 5 seconds, the instrument display will flash "oil" once and then continue to display "oil"; 3. Release the indicator light to select the chain button, and press the button 5 times in a row within 2 seconds; 4. "oil" flashes 3 times and then goes off, and the reset operation is completed.

You can also use a special detector to eliminate the maintenance lamp, but this method is usually used by maintenance personnel, and the premise of these methods can only be used after maintenance.

The maintenance indicator can be removed by adjusting the knobs on both sides of the display.

1. After the Suzuki SX4 reaches the maintenance mileage, the central control shirt dashboard will display the maintenance reminder light. First insert the car key and start the vehicle, otherwise the Qingling cavity will not be able to eliminate the maintenance reminder light.

2. Rotate the knob on the left in the central control first, and keep rotating until the maintenance prompt light flashes.

3. After that, click the left knob, and stop the rotation when you hear the beeping sound.

4. Observe the dashboard at this time, and the maintenance prompt light disappears.

Suzuki Tianyu maintenance lamp zero process:

1.It was the first to be connected to the Suzuki Swift's starter motor.

2.Then press the display chamber light selection button on the right for more than 5 seconds, and the instrument panel display will flash "oil" once and then indicate "oil" again.

3.Relax the display light pick button and press the button 5 times in 2 seconds.

4.The "oil" flashes to indicate that it is extinguished after 3 times, and the actual operation of the zero calibration is carried out.

We can also apply a professional checker to clear the maintenance lamp, but this method is generally used by the maintenance personnel of the gods, and we can return to zero on the mobile phone, but the prerequisites of this method can only be applied after maintenance, to prevent the application data information in the next maintenance is incorrect, and it is very likely that the maintenance may be missed.

Whether it is true that the maintenance light must be maintained, which is also to look at the number of kilometers between you and the maintenance mileage, if it is exceeded, it must be maintained, because the engine oil is likely to mildew because it has not been replaced for a long time. The condition of your own car is also related, usually in a very dusty area or your own driving habits are more intense, you can consider early maintenance.

Millions of car purchase subsidies.

Suzuki Tianyu maintenance lamp zero process:

1.It was the first to be connected to the Suzuki Swift's starter motor.

2.Then press the display light on the right to select the button for more than 5 seconds, and the instrument panel display will flash "oil" once and then indicate "oil" again.

3.Relax the display light pick button and press the button 5 times in 2 seconds.

4.The "oil" flashing indicates that the ridge is extinguished after 3 times, and the actual operation of the zero calibration is carried out.

We can also apply a professional checker to clear the maintenance lamp, but this method is generally used by maintenance personnel, and we can return to zero on the mobile phone, but the prerequisite for this method is to be able to apply after maintenance, to prevent the application data information in the next maintenance is incorrect, and it is likely to miss the maintenance time.

So whether it is true that the maintenance light must be maintained as soon as it is on, which is also a disadvantage to look at the number of kilometers between you and the maintenance mileage, if it is exceeded, you must go to maintenance, because the engine oil is likely to mildew because it has not been replaced for a long time. Then the condition of your own car is also related, usually in a very dusty area to rent a ridge Zheng Yu or your own driving habits are more intense, you can consider early maintenance.