How about the Tianyu Touch2 mobile 4G

Minimum use. Don't overthink it.

Hello, according to the situation you described, Crack Guess recommends to do it in the following way:

1.It is recommended that you check whether the local network is normal.

2.It is recommended that you try to change the card to see if the card is installed in the correct position.

3.If it does not work properly, it is recommended that you back up your data and restore it to factory settings.

4.If it still can't be solved, it is recommended that you send it to the Tianyu after-sales service center for testing, and the address of the Tianyu national after-sales service center.

Hello, according to the situation you described, it is recommended to try it as follows:

Whether the card has opened Internet access services; (If the Wi-Fi is currently on, please turn it off)2Please ask whether the Internet function of your mobile phone is turned on (mobile Internet access) 3Install Hydra APN Management Tool and set it up with one click.

4.Try to switch network mode; (Settings - All Options - Mobile Network - Works in 3G 2G mode).

4.Whether there is a current network signal.

5.Try a different SIM card.

6.Restart your phone and try.

7.Save important data on a factory restore attempt.

8.Go to the repair station to test the phone's hardware.

The address of Tianyu National After-sales Service Center.

Is it a signal issue? Can't get on the Internet even in the wifi environment?

If you can't get on, it's a problem with the mobile phone card, maybe your card is not connected to the network, it is recommended to go to the mobile center to ask.

Hello, according to your needs, the Tianyu Touch 2 model is an Android version of the smartphone.

The specific operation method of this model mobile phone card is as follows (this model of mobile phone card is a small card (15mm*12mm), not a large card (standard card 25mm*15mm), if it is a noisy imitation card, it is recommended to cut the card or replace the card before inserting the card).

1.Remove the back cover of the phone and the battery;

2.Card position: The position directly below the rear camera is the memory card slot, and then the downward position is the mobile phone card card slot;

3.Mobile phone card insertion method: The mobile phone card chip contact is downward, with the notched end direction up (relative to the direction of the card slot inward), and inserted vertically.

4.Memory card insertion method: Insert the memory card chip contact downward, and the slightly narrower end of the card end to the left (relative to the card slot direction inward) to the Hui Fiber, and insert it vertically.

Possibly. However, depending on your software version, only some firmware versions and above are currently supported, which is not available. Like my software, there are more than 30 of them, all of which can be installed in the same touch firmware.

**Don't be higher than 600, it is not a problem to use it for half a year, more than half a year, the system reflects that it begins to slow down, if you have good patience, it is no problem to continue to use it for 1 year.

Hello, according to your description of the situation.

1.It is recommended that you try to change your card.

2.Whether the current 4G signal is stable.

3.It is recommended to try to power on and off again.

4.If your phone can operate normally, it is recommended that you back up the personal information in your phone in advance to avoid data loss, and try restoring it to factory settings.

5.If there is still a problem after trying the above methods, it is recommended to go to the repair station to test the mobile phone, and it is recommended to contact the Tianyu after-sales service center, the address of the Tianyu national after-sales service center.