What details should be paid attention to when installing air conditioners, and what details should b

1. If the wall is a gray wall, the wall can be painted and decorated, which not only enhances the thermal insulation of the gray wall, but also saves electricity several times.

2. The outdoor unit of the air conditioner should not be installed anywhere, and its location should be conducive to future repair and maintenance; The installation of the outdoor unit (compressor) must be correct, and the installer must use a level to level it. The outdoor unit bracket should be equipped with the specified bolts, and there must be enough of them, beware of workers omitting a few bolts for the convenience of construction, and there will be a lot of trouble in the future.

3. To prevent rainwater from pouring into the room from the hole in the wall, in the process of installing the air conditioner, it is necessary to make a hole that is slightly higher indoors; After the installation is completed, the void of the wall hole must be plugged with putty, and if the drainage hole in the corridor is used, a similar problem should be noted.

4. To ensure that the condensate generated by the air conditioner during refrigeration can be discharged to the outdoors to prevent indoor water leakage, a little water can be poured into the water tray of the air conditioner during installation to check whether it can be discharged to the outdoors.

5. When the air conditioner is heated in winter, there will be water dripping out due to frosting, so it is necessary to prevent outdoor water leakage, so special attention should be paid to the installation of the outdoor unit outlet and outlet pipe when installing the air conditioner.

Air conditioning is a must-have household appliance in the family, and the purchase and installation of air conditioning is particularly important. Installing air conditioning is a more professional construction process, which is more complex than that of ordinary people, which involves many details, once ignored or not dealt with, it is difficult to install qualified air conditioners, so we need to pay more attention to these details. Today, let's take a look at the matters that must be paid attention to in the installation of air conditioners.

1.The outlet of the air conditioner should be as close to the wall as possible. When arranging the concealed wiring in the bedroom, it should be noted that the location of the socket should be as close to the wall of the air conditioning hole as possible, which is mainly for the sake of aesthetics.

If you don't do this, then the distance between the air conditioner, the air conditioning hole, and the power socket will definitely increase, and there will inevitably be two very obvious bright wires at this time, which are the power cord and the air conditioning pipe, which will affect the beauty of the bedroom. We should try to hide the socket behind the curtain to be arranged in the future, so that when the curtain is installed, the outlet of the air conditioner will naturally be hidden behind the curtain.

2.The air conditioning hole should be slightly inclined outward. Due to the improper installation of many air conditioners, the machine will often drip after a period of use, even if you unplug the power, it will still drip water.

This incident tells us that the air-conditioning hole should be tilted slightly outward, which can not only avoid rainwater coming in along the air-conditioning hole in rainy and snowy days, but also the situation of air conditioner water backflow caused by the drip pipe "high outside and low inside" will not happen again.

3.It is better not to have the air conditioner facing the bed. The air conditioner is always a machine, and no matter how humanized it is, there is no way to actively adjust the temperature with the user's body temperature.

Therefore, if the air conditioner is directly facing the bed, then the air conditioner will blow directly at the person, and the elderly are prone to rheumatism and cold, and the young are also prone to air conditioning disease. Therefore, when consumers install air conditioners in bedrooms, they should properly distance themselves from the air conditioner and the bed.

4.Air conditioning sockets should preferably be equipped with switches. This is a good way to save resources, because as long as the air conditioner is still plugged in when it is not turned on, then it is still using electricity, but the power consumption is relatively low.

The location of the air conditioning socket in many homes is relatively high, and frequent extraction is more troublesome. Therefore, when you install an air conditioner, it is best to choose an air conditioner socket with a switch, which can easily turn off the switch when the air conditioner is not in use, which is both power-saving and safe.

Hello! Air conditioner installation:

1. According to the position of the indoor unit, hit the wall eye of the tube, nail the hanging plate of the indoor unit at the predetermined position (the level must be guaranteed and corrected with a level), and hang the indoor unit after the tube is pierced;

2. Determine the position of the outdoor unit according to the length of the tube, and the outdoor unit should also ensure the level;

3. Connect the high and low pressure pipes, open the high-pressure valve first, then loosen the lock nut of the low-pressure pipe (discharge the air in the pipeline), tighten the lock nut after hearing the sound of gas outlet for 8 10 seconds, open the low-pressure valve, and connect the wires in order. If it is an Midea inverter air conditioner R410A refrigerant air conditioner, you need to evacuate the air conditioner for 30 minutes, and the pressure gauge shows negative pressure.

4. Turn on the power supply and test the machine. Check the pipe joints (lock nuts) with soapy water for leaks.

5. Test the machine, test the water, detect leaks, plug the wall holes, clean up, and guide the use.

Notes:1The copper pipe of the air conditioner should not be bent into a dead end;

2.Exhaust air thoroughly;

3.The internal and external organs should be horizontal and firm, otherwise the noise will be loud;

4.There must be no leaks.

1. After the unit arrives at the site, unpack, check whether the unit is damaged, and confirm the installation position of the unit;

2. Confirm the specifications of the cable in advance and lay it out, check whether the phase sequence is correct after the wire is connected, confirm the specification and quantity of each control line, and connect to the corresponding control port;

3. Confirm the inlet and outlet of the unit, if there is a triple supply unit, it is also necessary to distinguish the hot and cold water pipes to ensure that the water pipeline will not be connected to the wrong connection;

4. Confirm the specifications and models of auxiliary materials such as pumps, water pipes, valves, flanges, etc., ensure that the materials and models are correct, and will not be unable to connect, and ensure that the pipelines are properly insulated after installation;

5. Pay attention to the environment around the unit, which can ensure normal ventilation and heat exchange, and ensure that the heat exchange between the units and the units does not interfere with each other when there are multiple units;

6. If the unit has protective measures, ensure that the protective equipment of the unit does not affect the normal operation of the unit;

1. Socket and switch.

When the air conditioner is not in use, the plug can be unplugged, but the socket of the general air conditioner is relatively high, and it is more troublesome to pull the plug and there is also a certain danger. Therefore, you can choose an outlet with a switch as an outlet for the air conditioner, which will be safer and more convenient. The socket should be close to the wall where the air conditioning hole is located, the general air conditioning line will not be very long, the air conditioner is installed in the upper half of the wall, and the socket of the air conditioner should also be placed in that position as much as possible.

2. Air conditioning location.

Many families do not carefully consider the location of the air conditioner when installing it. When in use, the incorrect installation position of the air conditioner will cause a certain impact on people's health, which can easily cause stroke diseases. For smaller bedrooms, no matter how you adjust the position, the air conditioner will be more or less facing the bed.

In this case, it is necessary to pay attention to the choice of air conditioner with sleep function and good silent effect when purchasing.

3. Air-conditioned hole.

The air-conditioning hole in the wall of the air conditioner is often overlooked, thinking that it only needs to be opened so that the pipeline can pass through. But in fact, when playing the air conditioning hole, it is necessary to pay attention to the outward inclination, that is, "low on the outside and high on the inside", which can prevent the air conditioner from backing up water into the house when it is in use.

4. Don't change the wires at will.

Do not change the wires at will, and do not increase the power of electrical appliances, so as not to increase the electrical load and form a risk situation of wires and electrical appliances. When using, be sure to pay attention to the safety of electricity.

5. Check the air conditioner after it is ready.

After the air conditioner is installed, check whether it can be used normally and check whether there is any problem with the device.

Plug in the power cord and turn on the air conditioner to see if it can be turned on normally, and whether the heating and cooling forms can be used normally. Whether the air outlet of the air conditioner is normal, and whether there are any strange sounds and noises. After opening it for a while, check to see if there are any water leaks in various parts of the guard.

Attention to detail in air conditioning installation:

1. Prevent freon leakage: the refrigeration effect after the installation of the air conditioner is greatly affected by the amount of fluorine, and the installer must be carefully checked at the air conditioning connection port after the air conditioner is installed to see if there is any freon leakage;

2. Prevent rainwater from backfilling: In order to prevent rainwater from backing into the room, the inside side of the air conditioner should be higher than the outside side of the house.

3. Prevent indoor water leakage: condensate will be produced when the air conditioner is refrigerated, and it stands to reason that the condensate should be able to be discharged directly to the outdoors, but sometimes the condensate cannot be discharged if the installation is not good. Therefore, during installation, you can pour some water into the water tray of the air conditioner to test the drainage;

4. Prevent outdoor water leakage: When the air conditioner heats up, it will turn frost into water, in order to prevent outdoor water leakage, the elderly pre-installation personnel should install water outlets and water outlets for the outdoor unit.

5. Do not arbitrarily change the direction of the wires in the room and increase the electrical load, which is easy to cause air conditioning, resulting in a series of property losses. Finally, users are reminded to pay more attention to safe electricity use when using.

The details of the installation of the air conditioner are answered:

1. Prevent freon leakage: the refrigeration effect after the installation of the air conditioner is greatly affected by the amount of fluorine, and the installer must be carefully checked at the air conditioning connection port after the air conditioner is installed to see if there is any freon leakage;

2. Prevent rainwater from backing up: In order to prevent rainwater from backing up into the room, the inside side of the house should be higher than the outside side of the house of the air conditioner.

3. Prevent indoor water leakage: condensate will be produced when the air conditioner makes Song Hui cold, and it stands to reason that the condensate should be able to be discharged directly to the outdoors, but sometimes the condensate cannot be discharged if the installation is not good. Therefore, during installation, you can pour some water into the water tray of the air conditioner to test the drainage;

4. Prevent outdoor water leakage: the air conditioner will turn frost into water when heating, in order to prevent outdoor water leakage, the installer should install the water outlet and water outlet pipe for the outdoor unit.

5. Do not change the direction of the indoor wires and increase the electrical load at will, which is easy to cause air conditioning, resulting in a series of property losses. Finally, the old man reminded users that they should pay more attention to the safe use of electricity when using.

Change the orientation of the external unit to prevent the wind from blowing to the fan. Wash the dirt on the filter. When cleaning the filter, first cut off the power supply, and then open the air inlet grille; Take out the filter, wash the filter with water or a vacuum cleaner, the water temperature should not exceed 40 degrees, wash it with a hot damp cloth or neutral detergent, and then wipe it with a dry cloth, and do not wash the filter with insecticides or other chemical detergents.

Precautions for installing air conditioners: 1. Prevent Freon leakage during air conditioning installation. After the air conditioner is installed, be sure to ask the installer to perform a leak test on the air conditioner connection to prevent Freon leakage.

2. Prevent rainwater from pouring into the room from the hole in the wall. During the installation of the air conditioner, it is necessary to make a hole in the wall that is slightly higher indoors. After the installation is completed, the void of the wall hole must be plugged with putty, and if the drainage hole in the corridor is used, a similar problem should be noted.

3. Prevent indoor water leakage. To ensure that the condensate generated by the air conditioner during refrigeration can be discharged to the outside, you can pour a little water stool into the water tray of the air conditioner during installation to check whether it can be discharged to the outside.

1. There should be no obstruction in front of the indoor unit to ensure the jet distance of the cold air and make the indoor temperature relatively uniform. The drainage pipe must be straight, and appropriately inclined outward, in order to facilitate the smooth flow of water, if there is an elbow in the middle of the drainage pipe, it is easy to cause water accumulation and unsmooth flow, resulting in the indoor unit overflowing inward.

2. The cold air blown out by the air conditioner has a large proportion and is deposited to the lower part of the room, and the airflow range is very short, so if the air conditioner is installed under the window sill, the cold air flow cannot be evenly distributed in the whole room.

3. The installation height of the general air conditioner should not be less than 1m, but the air conditioner should not be installed too high, and the installation is too high, which not only brings difficulties to the daily use and operation, but also makes the air in the lower part of the room not be well cooled, and the temperature of the lower part of the room is high, which will also reduce the comfort of the air-conditioned room, so the installation height of the air conditioner should not be higher than 2m.