Tianxu solar water heater how about 10

Tianxu, really good, my family has been using Tianxu's solar energy, most of the neighbors around are using Sangle, Linuoruite, Huangming or something, before the installation to see the effect they use, not very good, not water leakage, or bursting, so when the installation we chose Tianxu solar energy OK, used for 4 years so far has not had a problem, the heat collection effect is also good, at that time the promise of a lifetime free tube change seems to be useless.

To put it simply, solar energy consists of three parts: 1. Vacuum tube. 2. Water tank insulation. 3. Bracket material.

First, with the rapid development of solar energy in recent years, more and more solar energy has reached the national and industry standards, and the quality of the hot sun rain and four seasons Muge in the industry has of course reached the national standard, but it is still relatively high (you may guess because of CCTV advertising) Of course, the quality of old brands such as Huangming and Tsinghua Sunshine is also good, and the price is also higher.

Second, there are many solar brands, the people have appeared aesthetic fatigue, do not know which brand to buy, the price is cheap after all, the quality needs to be further improved, one is the length of life (solar energy should be considered large, can not be blindly installed) and the quality of the winter insulation effect, if the polyurethane of the insulation layer does not meet the requirements or the thickness is not enough, it will definitely affect the insulation. Therefore, it is recommended to be cautious before buying.

Third, some second-tier brands in the solar energy industry are the best choice for our customers in terms of quality and quality. For example, Tianxu Solar (four times won the bid for household appliances to the countryside, the main manufacturers of vacuum tubes in the country have been supplying pipes for Sangle, Haier, Sunbao, etc.) ** is relatively low in the brand, and it is also a subsidiary of the State Grid. There is a family with Tianxu, do whatever you want.

Tianxu is a large state-owned enterprise in Zhucheng, Weifang City, Shandong Province. It mainly makes solar vacuum tubes for large enterprises such as Huangming, Galanz, Linuoruite, Tsinghua Sunshine, etc., and later makes solar water heaters.

My family bought it 3 years ago, and it's okay.

The current factory is to build vacuum tubes here, build water tanks there, and assemble them. No one builds it all by itself, because that would be too much investment.

It's not good, maybe it's okay in Shandong, but it's not good in the northeast of my house, my family just installed Tianxu solar energy is more than 15 degrees different from other people's Huangming, and the general solar energy in the northeast is really not good.

Tianxu has not heard, it is recommended that consumers install solar energy or choose the brand, so as not to have endless troubles, the initial investment is less than a few hundred, but the problem brought to you in the later stage is not a matter of hundreds, please choose carefully!

Tianxu solar is very good, the quality is excellent, I use Tianxu.

Shandong Tianxu Solar Energy, is a professional production of blank pipes and finished pipes of enterprises, many well-known brands in the market are from Tianxu into the tube, there is time to take a look.

Tianxu is a state-owned enterprise, and has won the bid for the brand of household appliances in the countryside for many years''China Chi Famous Trademark''Title. Aristocratic quality, civilian**, home decoration solar energy, when the first choice Tianxu.

Our home is Byerch Solar and we are very satisfied.

After clarifying the matter, please don't make rash judgments. In fact, Tianxu is: Shandong famous brand'A well-known trademark in China'For four consecutive years'Household appliances go to the countryside to win the bid brand'...Tianxu is the best choice after proceeding cautiously'

The following are the instructions for the use of Tianxu balcony flat panel solar water heater:1Installation:

Install the water heater on the balcony or roof, etc., make sure that the solar panels can get enough sunlight, and connect the water pipes and power cords. 2.Power on:

Plug the power cord of the water heater into the outlet and press the power switch on the control panel, and the water heater starts working. 3.Warm-up:

After the water heater is started, it needs to be preheated first so that the water temperature in the tank reaches the set temperature. The warm-up time is generally 2-3 hours, depending on the weather and the intensity of the sun. 4.

Tempering: After the preheating is completed, you can adjust the water temperature through the temperature regulator on the control panel, it is generally recommended to adjust the water temperature between 40-50 to ensure the comfort of the water and the energy saving effect. 5.

Use: After the water temperature is adjusted, you can turn on the water dispenser switch at any time to take hot water. Remember to turn off the water outlet switch after use to save energy and extend the life of your water heater.

6.Maintenance: In order to ensure the normal operation and prolong the service life of the water heater, it is recommended that you regularly clean the solar panels and water tank, check whether the power cord and water pipes are damaged, and repair and replace them in time.

It should be noted that the Tianxu balcony flat panel solar water heater needs to make full use of sunlight resources when used, and the use effect will also be affected by the weather and season. In cold winter or rainy weather, the hot water generation efficiency of the water heater may decrease, and the method and time of use need to be adjusted appropriately.

Summary. 5 ways to use solar water heaters:

1. To use household solar energy, you need to open the cold water valve first, adjust to the appropriate cold water temperature, let the cold water flow out slowly, and then open the hot water valve to release the flowing water, mix with the cold water to form warm water, pay attention to the hot water valve open less every time to prevent scalding.

2. The water supply of the household solar water heater should be decided according to the weather, the water tank needs to be full on sunny days, half of the water is needed on cloudy days, and the water is not on rainy days.

3. The power of electric heating is 1500W, if it is used in cloudy days or when the water temperature is not enough in winter, do not plug it in for a long time. The power must be turned off when bathing. When plugged in, if the leakage protection plug is red when it is on, it proves that it is heating, and when the green light is on, it means that the water temperature has reached 65.

4. When the temperature is not too low (7 -5), after the water is used up at night, there is still some hot water in the water heater (water in the vacuum tube), which should be filled with water immediately to reduce the internal water temperature of the water heater, reduce the heat loss of the night, and make full use of the heat energy.

5. When taking a bath, if the water in the solar water heater has been used up and the person has not been rinsed, you can use cold water for a few minutes, use the principle of cold water sinking and hot water floating, and push out the hot water in the vacuum tube, and then take a bath.

Tianxu balcony flat panel solar water heater instructions?

5 ways to use solar water heaters: do shout 1, use household solar energy need to open the cold water valve first, adjust to the appropriate cold water temperature, let the cold water flow out slowly, and then open the hot water valve to release the flowing water, mix with the cold water to form warm water, pay attention to the hot water valve every time to open less, to prevent scalding. 2. The water supply of the household solar water heater should be decided according to the weather, the water tank needs to be full on sunny days, half of the water is needed on cloudy days, and the water is not on rainy days.

3. The power of electric heating is 1500W, if it is used in cloudy days or when the water temperature is not enough in winter, do not plug it in for a long time. The power must be turned off when bathing. When plugged in, if the leakage protection plug is red when it is on, it proves that it is heating, and when the green light is on, it means that the water temperature has reached 65.

4. When the temperature is not too low (7 -5), after the water is used up at night, there is still some hot water (water in the vacuum tube) in the water heater, which should be filled with water immediately to reduce the temperature of the water inside the water heater, reduce the heat loss of the night, and make full use of the heat energy. 5. When taking a bath, if the water in the solar water heater has been used up and the person has not been rinsed, then you can sell cold water for a few minutes, and use the principle of cold water sinking and hot water floating to eject the hot water in the vacuum tube, and then you can take a bath.

1. Enter the Tiansou Bridge Muxu Balcony Flat Panel Solar Water Heater on the computer, find its official ** and click to enter 2, enter the official website of the solar energy after the guess page jumps, click on the technical support in the upper right corner to enter 3, at this time, you can see the instruction manual of the brand solar energy in the page that appears.

Summary. Hello, dear, in the winter temperature below 0 in the area, after the installation of the solar water heater, the pipeline must be insulated, in case the use of the water heater is affected by the freezing of the pipeline, if necessary, the electric heat trace can be installed. The temperature of the inner wall of the collector tube can reach about 250 degrees after the sun is airborne, so do not replenish water after installation with light, and it is best to replenish water immediately after bathing at night.

When there is water overflowing from the overflow pipe, it means that the water tank is full, and the water inlet valve should be closed immediately to prevent the hot water in the tank from overflowing and leaking.

Hello, dear, letter is not in the winter temperature below 0 area, after the installation of the solar water heater, the pipeline must be insulated, in case the use of the water heater is affected by the freezing of the pipeline, if necessary, the electric heat trace can be installed. The temperature of the inner pipe wall can reach about 250 degrees after the heat collection slip tube is exposed to the sun, so do not replenish water after installation with light, and it is best to replenish water immediately after bathing at night. When there is water overflowing from the overflow pipe, it means that the water tank is full, and the water inlet valve should be closed immediately to prevent the hot water in the water tank from overflowing and leaking.

Tianxu solar water heater use step 1, open the water inlet valve and faucet, plug in the power supply, and press the switch button of the water heater. 2. Set the water temperature. 3. After the water is boiled, first adjust the valve to the middle position, and test the water temperature to be suitable before use.

4. After use, turn off the switch on the electric water heater first, and then unplug the power supply after the hand is wiped dry.

Instructions for the use of Tianxu balcony flat solar water heater: 1. First install the piping system of the solar water heater, and fix the pipe and the solar water heater to the wall; 2. Unscrew the four Phillips screws on the pipe, and fully tighten the accumulator and water tank of the solar water heater. 3. Install the controller and connect the power cord in the controller with the solar panel on the solar water heater.

4. Adjust the analog knob to "highest", and the water temperature of the solar water heater can reach the highest at this time; 5. After the power is turned on, the solar water heater can be used normally. Extension: When using a solar water heater, you should pay attention to:

1. Do not hang any Li Minhao items behind the solar water heater to avoid damaging the solar water heater; 2. Make sure that the solar panels are not shaded to maximize the collection of solar energy; 3. When using solar panels, the maximum temperature should not exceed the maximum temperature specified in the technical parameter table of the water heater; 4. Clean the solar panels regularly so that the dust and water on the solar panels do not affect the solar beam; 5. Regularly check whether there is leakage in the piping system connected to the solar water heater, and replace the consumables according to the model.