How do you remove the Volkswagen cc tire pressure failure light?

Tire pressure of car tires.

The alarm is cleared as follows:

1. After the tire pressure indicator light is on, it is necessary to ensure that the car is parked on the side of the road under safe conditions, and first check the tire pressure detection function of the abnormal wheels on the car navigation screen.

2. After confirming that there is an abnormality in the wheel, we must check whether the tire pressure of the wheel is high or low. If the tire pressure is too high and an alarm occurs, the tire gas can be slightly increased to a safe tire pressure value. There is a sign of tire pressure, press OK to reset.

3. The tire pressure is too low, and you need to reset and drive the car for a while.

Hello, the tire pressure warning light is on, indicating that the tire pressure of the four tires is not in the normal range, generally the tire is out of air due to slow air leakage or nails, or the tire pressure is too high, which will cause the tire pressure alarm.

It is recommended that you get out of the car and look at the 4 wheels, which lack of air should be able to see directly, if you can't see it, drive the car to the auto repair shop to measure the air pressureIf one tire is depressed, it is the tire that is flat, it is recommended to repair it, if the tire pressure is too high, you can deflate and balance with other tires.

Hello. The tires need to be inspected to see if there are any air leaks and the air pressure of the tires is restored. After adjustment, manipulate the vehicle's buttons to reset the tire pressure reset button.

Perform a reset. See if the faulty light can be eliminated. If this is not possible, a computerized diagnostic instrument is required for measurement matching.

After setting, the fault light is eliminated. Hope mine is helpful to you, I hope you do.

Open the glove compartment on the passenger side, there is a button in the upper left corner (next to the auxiliary airbag key switch), in the case of turning on the ignition switch, press and hold that button, and know that the tire pressure light is off! However, to check the tire pressure, it must be within the normal range.

Once all four wheels are back to standard air pressure, press and hold the tire pressure reset button next to the gear lever to eliminate the tire pressure light.

CC tire pressure alarm is generally caused by tire loss of pressure, mostly caused by tire tread nails resulting in air leakage.

When you find that the tire pressure warning light of the dashboard is always on, you should go to the tire repair shop in time to check and repair the tire.

After the tire repair is completed, the tire needs to be inflated according to the air pressure value specified on the label on the inside of the fuel tank cap.

The tire pressure light elimination method of the Volkswagen CC is as follows:

Multi-function steering wheel right-click to select - Settings - Tire pressure monitoring - Click OK to go - Save.

The reasons and solutions for the tire pressure light are as follows:

1. The tire pressure monitoring light is on due to the tire being punctured.

This situation is usually very slow air leakage, for a while can not find out which tire is it, at this time you can use the tire pressure gauge to measure, front, rear, if there is a lack of air, make up, and then observe the tire pressure warning light, if a few days later and on, it may be necessary to pick up the tire to check. 4S shop, the usual way for maintenance personnel to deal with it is to adjust the pressure of the two front tires to, adjust the pressure of the rear tires, and then cut off the tire pressure alarm, and let us run another day to see, if you don't call the police again, it will be no problem, and then call the police may have a tire that has been punctured, and you need to go to the 4S shop again, so that they can help check and check.

2. The tire pressure monitoring light is on, sometimes the tire pressure is too high.

Standard tires:; Reinforced tires:; Maximum air pressure: should not be greater than. Therefore, when there are tires that exceed them, the tire pressure monitoring light will also be triggered, and 3. The tire pressure monitoring light will be on due to low tire pressure driving time for too long.

This situation usually occurs when the tire pressure of a tire is too low, and the tire temperature rises due to high-speed operation, which causes the tire pressure to rise, and then the tire pressure rises, so you should stop and rest in time or replace the spare tire.

4. The tire pressure monitoring light is on due to the low tire pressure that has not been refilled for a long time.

When the air pressure is lower than the bottom, the tire pressure monitoring light is on, so you should usually do a check to see if the tire pressure detector is normal. When there is a situation in the car, if the tire pressure monitor does not alarm in time, it is a problem with the tire pressure monitor.

The solution is simple: press and hold the tire pressure button for more than 30 seconds, and the system will reset and set the new tire parameters to the default value.

Volkswagen models are equipped with an indirect tire pressure monitoring system (TPR), which works by using the speed sensor on the car's ABS braking system to compare the number of turns of four tires. If one of the tires has a low pressure, the rolling radius of this tire will be smaller and its revs will be faster than the other wheels. By comparing the speed difference between the four tires, the system can determine whether the pressure of the tires is normal.

When the system determines that the air pressure of the four wheels is inconsistent, it will light up the tire pressure light on the instrument panel and make a certain sound to warn the driver.

This indirect TPMS system can be problematic in use, as it does not specifically indicate which tyre is underpressurized. There are also some false alarms, such as when the car is driving on sand or ice and snow, if a wheel slips, the system will think that the tire pressure of the car is abnormal; Or after the tire is replaced, due to the difference in the diameter of the new tire and the old tire, the speed of the new wheel is different from the original wheel speed when the car is driving. When this speed difference reaches a certain value, the system will think that the air pressure of the tire is abnormal and light up the tire pressure warning light.

So, when the tire pressure light of the Volkswagen series is on, we first have to check whether it is really a certain tire that has a problem. If there is no fault, we can consider it a false alarm, as long as the tire pressure light is eliminated.

If the Geely Emgrand tire pressure light is eliminated, you need to find the MENU button on the turn indicator pole, select the tire pressure display item in the stroke fuel information menu, and then press the SET CLR button, there will be an interface for tire pressure re-learning on the vehicle instrument display, and after the selection is confirmed, the tire pressure light will disappear.

Geely Emgrand tire pressure lights are on during driving, please stay calm, don't panic, immediately reduce your speed and avoid fast steering wheel and hard braking, and check your tires immediately. If you have your own simple inflation, you can drive to the side of the road, test and inflate each tire. If not, you can drive slowly, find the nearest service area or car repair shop or 4S shop, and use the diagnostic device to eliminate the tire pressure light.

Most vehicles are basically equipped with tire pressure monitoring or tire pressure warning device, the vehicle in the driving process, when the tire pressure changes, the tire pressure warning light will then alarm to remind the driver, tire pressure monitoring is in the vehicle driving process to do real-time automatic monitoring of tire pressure, and to tire leakage and low pressure to do an alarm, the key purpose is to ensure safe driving.

Hello, there is a row of buttons in front of the gear lever, the one on the far right (there is a pattern on the button and the pattern of the tire pressure warning light), the tire pressure of the two cars in front is the same, and the tire pressure of the two cars in the rear is the same, press and hold for 3 seconds, and when you hear a drop, the light will go out [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

1. First of all, do not start the 13 Volkswagen CC

In the case of a car, press and hold the tire pressure.

Reset button. <>

2. Insert the keys of 13 Volkswagen CC cars below and start the 13 Volkswagen CC cars.

3. Next, release the tire pressure reset button of 13 Volkswagen CC cars, and press the clock adjustment button of 13 Volkswagen CC cars.

4. As you can see below, the tire pressure of 13 Volkswagen CC cars will be in reset mode.

5. The tire pressure lights of the last 13 Volkswagen cc cars were eliminated.

1) Select "RPA" in the menu "Settings" and confirm it.

2) Select "Settings" and confirm.

1) Enter the i-driver interface.

2) Select "Settings".

3) Select "Vehicle Settings".

4) Tire pressure initialization, that is, "RPA", and then confirm.

Finally, start the car and drive for a few minutes, let the car remember the tire pressure, so that the tire pressure reset is completed.

First, use the pump to change the air pressure of the four tires to the same, and then use the on-board computer fault decoder to delete the error code fault file!

My tire pressure is in English how to return to Chinese.

1. Start the FAW-Volkswagen CC vehicle first, and then click the vehicle information button on the center console of the FAW-Volkswagen CC vehicle.

2. Next, select the tire option on the display screen of FAW-Volkswagen CC vehicle.

3. Next, select the "SET" option on the display screen of FAW-Volkswagen CC vehicle.

4. Next, select the OK option on the display screen of FAW-Volkswagen CC vehicle.

5. After the "tire pressure monitoring initialization" of the last Volkswagen CC vehicle is completed, the tire pressure light will be reset.

Solve the tire pressure problem first. Then press and hold the tire pressure button for about 3-5 seconds... The button is the first in the row to the right of the gear lever.

It should work.

There will usually be a button for tire pressure monitoring settings.

The button in the upper right corner of the standard suspect search vehicle is long pressed for 10 seconds to disarm the alarm.

First of all, the tire pressure alarm system equipped with this vehicle does not directly detect the real-time air pressure status of the four tires, but calculates the tire pressure status through the wheel speed sensor of the four wheels to sense the wheel speed difference. Therefore, it will happen that the alarm is affected by external factors.

There are many situations that can cause abnormal phenomena, such as uneven tire pressure, changes in outside temperature, changes in road surface smoothness and road surface materials, and changes in driving styles. (It is recommended to go to the 4s point to check the maintenance and compare insurance).