What to do if the kitchen sink is leaking? How to deal with a kitchen sink leak

What to do if the kitchen sink is leaking? Teach you effective ways to solve kitchen sink leaks.

Instruments used for the collection of gases by drainage, or for holding large quantities of water, not heatedTypical applications: catalytic decomposition of hydrogen peroxide by potassium permanganate to produce oxygen. Kitchen sinks are divided into cast iron enamel, ceramics, stainless steel, artificial stone, steel plate enamel, acrylic, crystalline stone sink, etc. according to the material; According to the style, it is divided into single basin, double basin, large and small double basin, special-shaped double basin, etc.

Sink outlet leakage: If the reason for the sink leakage is the leakage of the sink outlet, generally speaking, it should be the axial gasket in the sink that is damaged, as long as the shaft gasket is replaced. Rotate the gland with pliers, remove it after it is loosened, and use a clamp to remove the ground shaft gasket and replace it with a new one.

Loose connection between sink and countertop: water drowning on the countertop and leaking into the cabinet Buy glass adhesive strips and seal the glass glue at the junction between the sink and countertop. Leaking sink drain pipe:

Whether it is the leakage of the upper interface, or the leakage between the sink sewer pipe and the underground sewer pipe, the problem is on the rubber pad, the rubber pad is aging or cracking, there will be water leakage, then just disassemble the rubber pad and replace one. Leaking water in the sink itself: Apply waterproof putty to the leak in the sink.

Broken or loose sink parts: Carefully check the position of the angle valve, screws and rubber pads to see if there are corrosion and aging problems due to too long use, if so, it is recommended to replace one again. Leakage in the gap under the sink plug:

Water leakage in the gap under the sink plug may be caused by the wear of the triangular gasket in the gland. At this time, as long as you use a tool to rotate the screw of the faucet, remove the screw and tie head after loosening, loosen the gland and remove it, and then take out the triangular gasket in the gland and replace it with a new triangular gasket.

If the faucet is leaking, then you only need to disassemble the red and blue logos of the faucet and replace the rubber pad inside, so that the faucet will not leak, which is very convenient and reliable. This method was also introduced to me by a friend, and I tried it according to this method, and it was very effective, very convenient and fast. Such a trivial matter is indeed a very troublesome thing for people who are not very proficient in kitchen construction.

If the connection between the sink and the countertop is loose, and the water drowning on the countertop, causing it to leak into the cabinet, such troubles are also common. Solution: First go to the building materials market to buy glass adhesive strips, because the sealing effect of glass glue is very good, and then seal the glass glue bought back at the junction between the sink and the countertop, so that it is solved, after using such a method, you will no longer worry about kitchen sink leakage.

If there is a leak at the sink outlet, it is usually the shaft gasket in the sink that is worn out and needs to be replaced with a new shaft pad. Use pliers to loosen the gland and remove it, take out the shaft gasket with a clip, and replace it with a new shaft spacer. The leakage in the gap under the sink plug is caused by the wear of the triangular gasket in the gland, which caused the faucet to leak.

At this time, loosen the screws of the kitchen faucet and remove the tie head, then remove the gland after loosening it, and then take out the triangular gasket on the inside of the gland and replace it with a new one. A leak in the joint of the sink pipe may be caused by a loose cap nut on the faucet, which can be solved by re-tightening the cap nut or replacing it with a new U-shaped gasket.

1. If it is caused by the leakage of the sink outlet, it may be due to the failure of the axial gasket in the sink, Lu Suibu can replace it with a new one, take the pliers to rotate the gland bolt off, and then use the clamp to take out the damaged axial gasket and replace it with a new one.

2. If the connection between the sink and the countertop is not tight, resulting in water overflowing into the table and leaking into the cabinet, you need to buy high-quality glass strips and seal them at the junction between the sink and the countertop.

3. If the sink drain pipe is leaking, this may be the cause of the rubber pad, and the rubber pad will leak when it is aging or cracked, so the rubber pad needs to be disassembled and replaced.

4. If the sink itself leaks early spike water, you need to take waterproof putty and apply it to the leaking place.

5. If the parts of the sink are damaged or loose, first check whether the angle valve, screws, rubber pads and other places are corroded and aged because of the use of too long, if so, replace the new parts.

6. If there is water leakage in the gap under the sink, it may be due to damage to the triangular gasket inside the gland, rotate the screws of the faucet, loosen the gland, and then take out the triangular gasket inside and replace it.

What are the specifications of kitchen sinks.

There are three main types of kitchen sinks, namely single sinks, double sinks and triple sinks, and different sinks have different specifications and sizes. The more common sizes of single grooves are 60*45cm and 60*40cm; The more common sizes of double groove belts are 88*48cm and 81*47cm; The more common sizes of the three grooves are 97*48cm and 103*50cm. When setting the width of the water pipe, the width of the water pipe is generally 430cm-480cm, and the depth should be greater than 180cm, which can effectively prevent the occurrence of water splashes.

When setting the thickness of the sink, it is generally appropriate to between, as too thick it may affect the washing effect.

1. Leakage of sink drain.

If the leakage of the sink is due to the leakage of the sink drain, generally speaking, it should be the pivot washer in the sink that is damaged, and only need to replace the pivot pad with one. Use needle-nose pliers to tie the gland and rotate it, take it out after it is loosened, and use an iron clamp to remove the crushed pivot washer and replace it with a new one.

2. Water leakage in the gap under the sink bolt.

Water leakage in the gap under the sink plug may be caused by damage to the triangular gasket in the gland. At this time, you only need to use a special tool to turn the screws of the faucet, take out the screws and tether after loosening, loosen the gland and take it out, and then remove the triangular gasket in the gland and replace it with a new triangular gasket.

3. Water leakage at the junction of the sink butt.

The reason for the leakage at the junction of the sink butt may be that the cap screw cap of the faucet is loose, and the difficulty can be solved immediately by tightening the cap screw cap again or replacing it with a new gasket.

4. The water pipe is brittle and leaking, and the sealing is not timely leaking.

The water pipe is brittle and the sealing is not timely, and only the actual hardware needs to be replaced. When installing hardware, all kinds of residues in the pipeline must be cleaned to prevent the valve core from being stuck and blocked. There are some more inconvenient hardware replacement to find technical personnel to carry out maintenance.

5. The sewer is plugged with water leakage.

If the sewer is plugged and leaking, you only need to dispose of the dirt, but it is better to have a technical staff to communicate it by yourself or let a technical staff to prevent the situation from getting worse.

The sink generally does not leak, the leaking is the drain pipe of the sink, maybe the mat is loose, try tightening it.

Kitchen sink leaking replace with a shaft pad. After that, use pliers to rotate the gland, remove it after loosening, and use the clamp to take out the ground shaft gasket and replace it with a new one.

First, tie the faucet tightly, turn it counterclockwise with a wrench to remove the faucet; Then turn the threaded hole outwards and roll the threaded part clockwise with sealing tape 5-6 times; Then observe whether the faucet slag hail song is adjusted well, and use the water tether pliers to tie it in the direction of the clock. After installation, turn on the main switch and try to confirm whether there is still water leakage at the faucet joint.

If there is a problem with the drain pipe in the kitchen. Generally speaking, the place where the water pipe rotates is particularly prone to water leakage, and it may be that the sealing is not perfect enough, so we can use glass glue to apply a circle on the fluttering area.

When it's dry, you'll be able to plug the hole. If there is a crack in the sink. We use glass glue to plug it up, or we can use welding to remove it and weld it again, but welding may affect its appearance.

How much is the depth of the kitchen sink in general:

In the depth is generally about 20cm is the best, so that the tableware washing is more convenient, and can prevent splashing, and the vertical angle of the basin wall is 90 degrees to increase the use of the sink such as Zheng Ji. If the sewer hole is in the first position of the sink, the space used in the cabinet will be reduced, so the sewer hole is back, and the water pipe is better installed against the wall, which not only runs quickly, but also makes effective use of space.

Kitchen sinks often have problems with water not draining, which may be caused by debris remaining in the sink clogging the drain pipe. What to do if the kitchen sink is leaking? How to easily solve the problem of kitchen sink leakage?

Kitchen Sink Introduction:

Kitchen sink, kitchen utensils for selecting vegetables and rice, brushing pots and washing dishes, etc. It is used more frequently in the kitchen. There are many types of manufacturing materials, including stainless steel, artificial stone, ceramics and granite.

According to the size classification, it can be divided into single slot, double slot, three slot and mother and child and mother trough. It is an indispensable accessory for modern home kitchen decoration.

Kitchen sink leaking:

The cause of kitchen sink leakage needs to be analyzed, of course, the cause of kitchen sink leakage may not be the only one, we should analyze the specific problem and repair it according to different situations.

Kitchen sink leakage situation 1: Leaking faucet.

Disassemble the red and blue logos of the faucet and replace the rubber pads inside. Kitchen sink leakage 2: The connection between the sink and the countertop is loose, and the water drowning into the countertop and leaking into the cabinet.

Buy glass strips and seal them at the junction between the sink and the countertop.

Kitchen sink leakage situation 3: kitchen sink drain pipe leakage.

Whether it is the leakage of the interface above, or the leakage between the sink sewer pipe and the underground sewer pipe, the problem lies in the rubber mat group, the rubber mat is aging or cracking, and there will be water leakage. Kitchen sink leakage situation 4: The sink itself is leaking.

Apply waterproof putty to the sink leak.

Kitchen sink leakage situation 5: Broken or loose sink parts.

Carefully check the position of the angle valve, screws and rubber pads to see if there are corrosion and aging problems due to too long use, if so, it is recommended to replace one again.

Sinks in the kitchen are very common, there are single sinks, double sinks and other designs, and the material of stainless steel is generally chosen, because the sink of this material is not only excellent and hard, but also has the advantages of long service life, easy to clean, and not easy to break. However, the problem of leakage in the kitchen sink is also a problem that is difficult to avoid, so how to fix the leakage of the kitchen sink? Let's take a look with Qeeka Home experts.

1. How to fix a kitchen sink leak.

Water leakage at the junction between the faucet and the sink is generally a sealing problem, and the bottom nut can be tightened a little; If the gap at the edge of the sink is leaking, you can bury it early and apply the gap with glass glue, clean it and wait for the glass glue to dry before you can continue to use it; The pipe under the sink is leaking and the broken pipe needs to be repaired, or only part of the pipe can be replaced.

Second, what are the materials of kitchen sinks?

1. Ceramic sink.

The weight of ceramics is relatively large, and if it is used to make kitchen sinks, it is necessary to have certain requirements for the support of cabinets and countertops, otherwise it is easy to fall off. The ceramic sink does not have to worry about high temperature, corrosion and other problems, and it is very easy to clean at the same time, so it is a good choice.

2. Stainless steel.

The stainless steel sink can be said to be the mainstream of the kitchen now, with a wide range of use, suitable for different styles of kitchen, can be well integrated with the overall style of the kitchen, and has good performance in corrosion resistance, oxidation resistance, toughness, etc., but in daily use to avoid being scratched, otherwise the scratches will affect the overall aesthetics.

3. Granite.

Granite sinks are relatively rare because of the high hardness of granite itself, which is more difficult to process. However, the performance of this sink is very good, it is basically not scratched by iron, and dirt is not easy to accumulate, so it is easy to clean.

Summary: The above is about how to repair the kitchen sink leakage, and what are the materials of the kitchen sink.