The fish tank is leaking, what to do, how to fix the fish tank leakage

Drain the water in the fish tank, cut off the glass at the glue opening as a whole, clean the original rubber strip, and re-glue the glass. It takes half a month for the glue to dry... As for the fish, figure it out for yourself...

If there is a leak in the fish tank, it may be caused by trachoma at the glass bond, or it is caused by the cracking of the adhesive, and the water and fish in the fish tank need to be temporarily transferred to another container, and the crack is sealed with glass glue, and it can be used again after 36 hours without leakage. In fact, if there is a leakage in the fish tank, it is because of the glued trachoma at the glass bond, or the cracking of the bonded glue, as long as the crack is glued with glass glue, it is easier to deal with.

Causes of fish tank leakage.

1. The glass is too poor: the fish tank is basically made of glass, but the glass is actually very different, and the better ones are float glass and ultra-clear glass, which not only have high transparency, but also have a certain toughness. Ordinary glass is inferior, and if the quality is not up to standard, there will be a risk of bursting.

2. Insufficient thickness: Under normal circumstances, the thickness of the fish tank glass is required, which is often related to the specifications of the fish tank, the larger the fish tank, the thicker the glass, because the water pressure of the large fish tank is also higher, if the glass is too thin, it will lead to a burst of the tank. In particular, the higher the water level, the more likely this situation is.

3. Poor placement: The placement of the fish tank also has certain requirements, and it should be avoided from being vibrated at ordinary times, otherwise it will increase the risk of bursting the tank for a long time. In addition, it also depends on its force, generally do not put something on the fish tank, otherwise it may also burst.

Drain the water in the fish tank first, clean and dry the fish tank to find out the cause of the water leakage. Generally, the leakage of the fish tank is the cracking of the adhesive sand hole or the glue pasted at the glass bond.

Solution: In the place where there is a water leak, the inside and outside of the fish tank should be marked with acidic transparent large plate glue. After 36 hours, the fish tank is full for a 36-hour test. If there is no leakage, the fish tank can be used.

If there is a leak in the fish tank, it may be due to trachoma in the glass bond. Either the viscose cracks and the water and fish in the tank need to be transferred to other containers. Then clean the fish tank, glue it to the cracked part of the fish tank with glass glue, and wait for a period of time to test.

What should I do if there is a leak in the fish tank during the process of raising water? First of all, you need to temporarily transfer the water and fish in the fish tank to another container, do not pour the water directly and raise the fish in other water, otherwise the fish will not adapt.

Then clean the fish tank and dry the fish tank to find the cause of the leakage. After finding the cause, you can use glass glue to glue the cracked part of the fish tank, wait until 36 hours later, and then put it into the water to test whether the fish tank is leaking, and if it does not leak, you can continue to use it.

But in fact, if there is a leakage in the fish tank, it is generally caused by the presence of bonded trachoma at the glass bond, or the cracking of the bonded glue, as long as the crack is glued with glass glue, it is easier to deal with.

1. Find the location of the fish pond leakage first, if there are defects such as pore cracks, you should first take cement mortar to repair and smooth it, and the yin and yang corners should be wiped into an arc shape to ensure that the base surface is moist and there is no open water.

2. Deal with the base surface of the leakage of the fish pond, which is closely related to the waterproof construction, and the base surface needs to be cleaned before construction to ensure that it is firm, smooth, and free of dirt and other debris.

3. When preparing polymer cement, pay attention to the balance of force when applying the coating, there is no omission, and ensure that the angle is vertical when painting on the front and back sides, so as to fully cover, but the thickness should not be too thick, otherwise it will crack after drying.

4. Finally, the protective layer of the fish pond should be maintained, and it is necessary to ensure that it is dry within 24 hours after construction, to ensure natural air drying, and not to step on, rain, expose to the sun or touch with sharp objects.

Summary. When you find a leak in the fish tank, you should first remove the fish from the tank, then drain the water, wipe it clean after cleaning, and check the location of the leak. Generally, it leaks in the place where the glass glue is bonded, and there is also a kind of glass cracking.

No matter what kind of water leakage, it can be remedied with glass glue. Apply glue to the leaky area and place it in a ventilated place to dry and disperse the odor.

What to do if the fish tank is leaking? How to fix it?

Hello friends, after finding a leak in the fish tank, the first thing to do is to remove the fish from the tank, then drain the water, wipe it clean after cleaning, and check the location of the leakage. Generally, it leaks in the place where the glass glue is bonded, and there is also a kind of glass cracking. No matter what kind of water leakage, it can be remedied with glass glue.

Apply glue to the leaky area and place it in a ventilated place to dry and disperse the odor.

Summary. Hello, the leakage of the fish tank can be repaired by wax liquid leakage, using glass glue, and playing wooden racks.

What to do if the fish tank is leaking? How to fix it?

Hello, the leakage of the fish tank can be repaired by wax liquid leakage, using glass glue, and playing wooden racks.

Wax liquid leak-proof. Wipe the leaking place of the fish tank dry, light the candle and drop a few drops of wax liquid, which can temporarily ensure that there is no leakage, which is the fastest way.

Use glass glue.

Apply the glass glue to the leakage, but scrape the original glass glue with a knife to prevent further leakage.

Wooden frame repair.

Put the fish tank on a wooden frame, polish the wooden frame smoothly, and apply glass glue.

Repaste. Contact the maintenance worker to disassemble the fish tank and re-glue it firmly.

I hope it helps you and I wish you a happy life.