What should I do if the wall tiles in the kitchen and bathroom are bulging?

1. The tiles are completely loose!

In this case, the treatment method is relatively simple, first take out the bulging tile carefully, and then clean up the dust and impurities on the back of the tile and the base part of the ground, and use a special tile adhesive to paste. Because it is a floor tile, there will be certain requirements for its compressive resistance, and the tile adhesive on the back of the tile can be evenly applied to the back of the tile when pasting, so as to avoid the hollowing of the tile as much as possible. (Of course, the best way to deal with it is to use cement mortar paste.)

2. The tiles are not completely loose!

The difficulty of dealing with this problem lies in the fact that when taking out the tiles, it may cause damage to the tiles, which may involve the replacement of damaged tiles, if you do not keep the spare tiles, then you have to implement whether you can find the same color number (the same model of products, if not the same batch of production, its color may be different) products, and re-fill some tiles of the same color. The tile is smashed open from the middle, use a crowbar, carefully pry the damaged tile from the middle to the periphery, so that the treatment will not cause damage to the surrounding tiles, after the tile is taken out, and then dispose of it in accordance with the method in the first article above.

It can also be treated by grouting, that is, the cement mortar mixed with 108 glue penetrates from the gap of the tile to the bottom of the tile. (This treatment method is a palliative but not a cure-for-root method, can not completely solve the problem of loosening of tiles, may still appear after a long time.) ）

The brick is too tight and there is no seam, and the thermal expansion and cold contraction cause the brick to bulge.

What is the situation? How long has it been renovated? Who did it? How many pieces? Location? Are there bricks or not? Spacing between bricks? What is the description of the drum shape?

Bathroom tile wall bulging is a very common problem, which not only affects the aesthetics of the bathroom, but also affects the waterproofing of the house, once not dealt with in time, it will also bring a threat to the health of the family. So what should I do if the bathroom tile wall dust is noisy? Here are some methods to refer to:

1.Find the cause of the bulge: First of all, you need to find the cause of the bulge, which is usually related to factors such as the unstable structure of the wall base (cement wall) and the unreasonable auxiliary materials.

If it is caused by improper construction, untreated base layer, improper selection of waterproof materials, etc., it is necessary to reprocess the base layer or re-pave the tiles.

2.Replace the brick joint glue: If the wall tiles are not very seriously bulging, then you can try to replace all the brick joint glue in the problem area, and then paste it with cement glue. However, when using new brick joint adhesive, we must pay attention to choosing products with reliable quality and waterproof function.

3.Use professional waterproof touch-up paint: If the problem is more serious, you can choose to use professional waterproof touch-up paint to deal with it.

According to the actual situation, choose different ways to repair paint, such as scraping waterproof adhesive. This method is more thorough to deal with wall drumming, but it is also relatively complicated to operate.

4.Find a professional construction team: If you are not sure how to deal with it, it is best to find a professional construction team to deal with it.

They will make the best treatment plan according to the specific situation and ensure the quality of construction. However, it should be noted that when selecting the construction team, we must choose a qualified one with a good reputation to avoid unnecessary trouble.

Bulging bathroom tile walls are a common problem, but they are also an important job. As long as it is dealt with in a timely manner, the damage of the problem can be effectively avoided.

Summary. 1. Generally, the ground tiles are bulging for the following reasons. First, the way to pave the floor tiles is wrong, the gap between the floor tiles and the floor tiles is too small, and over time, it causes the floor tiles to bulge.

And when laying tiles, if the ground is not leveled, it will still cause the floor tiles to bulge.

2. Another reason may be that when building a house, the quality of cement on the ground is too poor, so that when the floor tiles are pasted, the combination of cement and the ground is not tight enough, which will lead to bulging over time.

What is the cause of the bulging wall tiles in the bathroom and who should I look for?

1. Generally, the ground tiles are bulging up for the following reasons. First, the way to pave the floor tiles is wrong, the gap between the floor tiles and the floor tiles is too small, and over time, it causes the floor tiles to bulge. And when laying tiles, if the ground is not leveled, it will still cause the floor tiles to bulge.

2. Another reason may be that when building a house, the cement quality of the ground is too poor, so that when the floor tiles are pasted, the combination of cement and the ground is not close enough, which will lead to bulging over time.

3. There is another reason that will cause the ground tiles to bulge, that is, when the workers are in the construction, there is no root beam to defend the characteristics of the tiles to take the corresponding process. If we buy some products with strong water absorption, we need to reserve the gap between the tiles in advance to prevent the tiles from absorbing water and swelling in the future, squeezing each other and causing bulging.

In this case, you should find a worker who is responsible for renovating you at the time.

Hello, if mine is helpful to you, please give a thumbs up.

Have a great day.

This needs to be taken down.

Then re-paste.

This bulging is caused by insufficient adhesion.

The tiles had to be taken down. Then the bottom is processed. There is no work that comes into contact with bricks and walls. The cement is all knocked out. Well. Then glue it well with special glue and cement.

Take it off and stick it again, or you don't care about it, and then repair it.

Bathroom wall tiles bulging is a relatively common problem, which is mainly due to some problems in the construction process or the impact of the use environment.

1.The brick is not firmly bonded to the wall: If the brick is not firmly bonded to the wall, the brick bulges out. Usually this situation occurs due to the lack of material bonding during the construction process, such as not cleaning the walls, not applying enough cement grout, etc.

2.The wall is uneven: if the wall is uneven, it will lead to unstable installation of bricks and is prone to bulging. This situation usually occurs in the renovation of old houses, because the walls of old houses are rougher.

3.The quality of bricks: If the quality of bricks is not good, it is easy to lead to bulging. This usually happens on poor quality bricks or imitation bricks.

4.The ambient humidity is too high: the bathroom is a relatively humid environment, if the environmental humidity is too high while installing bricks, it is easy to cause the bricks to bulge.

5.Installation method of bricks: When installing bricks, if you use the "head card brick method", it is easy to cause the bricks to bulge. Because this method is easy to cause tiny gaps between bricks, which in turn leads to the problem of drumming orange filial piety.

In short, there are many reasons for the bulging of bathroom wall tiles, which need to be analyzed and solved according to the specific situation. During the construction process, it is necessary to operate in strict accordance with the specifications and do not cut corners to ensure the quality and safety of bathroom decoration.