-
The key is which direction you want to develop, but the more certificates the better, if you want to sit in the office, you will take the cost test, and you will yearn for the construction site to run the test for the construction staff, quality inspectors, etc., but the secondary construction engineer is essential, don't forget that your certificates expire.
-
Review the basic course first and prepare for the test, which has a high gold content. Four years after graduation, you can take the exam as a builder and five years as a cost engineer. But in the end, there is still a test, but it is not so easy.
But these certificates are not repetitive, so the buddy downstairs is misleading you, hehe. Generally, if there is a bet, the others will not give any money, which is used by the design institute. The builder generally gives money to one, which will not be superimposed, at most a few thousand dollars more, and cannot be attached separately.
-
Take your time, the more documents, the better, and you'd better take the first-class constructor exam. (Not sure, or if the requirements are not enough, you can first take a second-level exam), you can also press the certificate without taking the exam, more than 3w a year for civil engineering, more than 4w a year for municipal administration, more than 4w a year for roads and bridges, as long as you are not afraid of the exam can not be pressed, then people are looking for you, you are taking a cost class, do a budget, if you have the ability, in the examination of the structural engineer. When you get these three certificates, it is not a problem to press an annual salary of 30w in a company (you don't have to go to work), and the money you will be attached to a year will not be less if you rely on a designer. . .
The key is that you can get in
-
I am also a civil engineer, and now it is best to take the civil engineering test as a constructor, a professional counterpart, and then take the second-level constructor exam in three years or by other means. There are two specific directions for constructors: one is to be a foreman and develop into a project manager; The second is to be a technician and develop to the general technical person in charge of the project.
Of course, it is not excluded to do other industries, such as surveying, cost, supervision, etc.
Hope mine is helpful to you!!
-
If you can't take the test without graduation, the cost clerk is estimated to be okay.
-
Civil engineering majors can take the University English Certificate Level 4 or 6, Mandarin Certificate, Computer Level 2 Certificate, CAD Certificate, and BIM Certificate during the school period.
There are many certificates that can be obtained after graduating from civil engineering with a certain number of years of work. Various registration certificates, such as: Class II Constructor, Class I Constructor, Fire Protection Engineer, Registered Geotechnical Engineer, Registered Structural Engineer, Cost Engineer, Supervision Engineer, Eight Construction Officers, etc.
However, each certificate has its own graduation and work experience requirements, and cannot be generalized. And except for the eight members, the gold content of each certificate is very high.
Introduction
If you must obtain the registration certificate mentioned in the second item during the university, you can register through an intermediary, and generally only need to meet the age requirements. However, the cost is very high and there is a certain amount of risk, so it is not recommended.
In the past, it was easier to be attached, but in recent years, it has been more difficult to attach, so if you want to get it through the operation in advance and then rely on the affiliation to return to the capital, you must seriously consider it.
-
There are many certificates to be examined in the engineering industry, such as Registered Structural Engineer, Registered Cost Engineer, Registered Supervision Engineer, Registered Architect, Registered Constructor, Registered Geotechnical Engineer, etc.
1. College students can take the certificate of the eight members of the construction department.
2. Prepare to engage in construction: you can test constructors, surveyors, witnesses, samplers, technicians, first-class constructors, second-level constructors, budgeters, cost engineers, etc.
3. Prepare to engage in design: you can take the first-level structural engineer and second-level structural engineer.
4. Prepare to engage in supervision: you can take the supervision engineer.
5. Appraiser and consulting engineer.
-
1. First-class constructor, first-class constructor can practice in the name of first-class registered constructor nationwide, and those who have obtained the construction qualification certificate and meet the registration conditions will obtain the first-class constructor registration certificate after registration;
2. The second-level constructor and the second-level constructor shall implement a unified outline, unified proposition and unified organization of the examination system, which shall be jointly organized and implemented by the Ministry of Personnel and the Ministry of Construction;
3. Registered cost engineer, registered cost engineer refers to the qualification granted by the state and approved to practice after registration, specifically to accept the designation, entrustment or employment of a department or a unit of the world, responsible for and assist it in the valuation, pricing and management of the project cost;
4. Registered supervision engineer, registered supervision engineer refers to the engineering construction supervision personnel who have passed the national unified examination and obtained the qualification certificate of supervision engineer and have been registered.
-
One year after graduation, you can take all kinds of basic examinations for registered engineers, as well as basic examinations for registered electrical engineers, basic examinations for registered utility engineers, basic examinations for registered chemical engineers, and basic examinations for registered environmental protection engineers.
The conditions for all kinds of basic examinations for registered civil engineers, basic examinations for registered electrical engineers, basic examinations for registered utility engineers, basic examinations for registered chemical engineers, and basic examinations for registered environmental engineers are the same, as follows:
1) Obtain a bachelor's degree or above in the major or a similar major.
2) Obtain a college degree in this major or a similar major, and have been engaged in related engineering majors for 1 year.
3) Obtain a bachelor's degree or above in other majors, and have been engaged in related engineering majors for at least 1 year.
Just graduated and quickly passed the foundation, after all, it is all a school course, and it is easy to forget it after a long time. It is easy to calm down and read a book when you have just graduated. Think about graduation, do not take the registration foundation, do not take the second construction, one construction, and wait for the registration major to take the registration major, it has been at least 5 years of graduation, these 5 years have not read books to prepare for the exam, it is a gap period, and the ability to review and prepare for the exam has fallen from the peak of high school and college to the trough.
-
The certificates that can be taken for civil engineering majors are as follows:
1. Certificate of registered constructor
This is the most priority and most popular certificate in the construction industry. It is a necessary certificate for project managers in the construction industry, and there are a lot of people who apply for the examination every year, and the builders are divided into level 1 and level 2, the first level is difficult, but the first level has a higher gold content.
2. Cost Engineer Certificate
Cost engineer is a common but scarce chain in the industry of a position, because now almost every project will involve cost, and the cost staff has been canceled, the market is not a lot of secondary cost engineers, the number of first-level people is relatively difficult to test, so there are many companies are willing to pay high salaries to hire cost engineers.
3. Safety Engineer Certificate
From the perspective of the development of the industry, China's safety management system is not good. In recent years, safety accidents have occurred frequently, and the country's emphasis on safety has gradually increased, and many places have clearly stipulated that safety engineers must be equipped, so the demand for safety engineers is great.
4. Registered Utility Engineer Certificate (Power, Water Supply and Drainage, HVAC).
Generally, the water supply and drainage major is more popular, and the market demand and salary are better, but relatively, the difficulty of the exam is also relatively large, but this certificate has a high gold content, and it is still very useful to take the exam.
5. Certificate of Registered Structural Engineer
This certificate is also relatively scarce at present, the difficulty of the exam is not low, and the degree of requirements for professional knowledge is relatively high, if you are not engaged in the structural industry, it is not recommended to take the exam, but in the end, you still need to look at your own industry and needs.
6. Certificate of Registered Civil Engineer
This certificate mainly includes rock transportation soil, port, waterway engineering, water conservancy and hydropower, road engineering and other majors. Among them, the gold content of Yanshi is the highest, and the salary in the market is also the highest, but the difficulty of the exam is also relatively high, and the pass rate is extremely low every year, so it is very difficult to pass the exam.
7. Registered electrical engineer certificate
It mainly refers to power supply and distribution, power generation and transmission, because it involves electricity, which is something that all people and all industries cannot live without, so the demand is very large. Relatively speaking, the exam is also difficult, and it is relatively professional, and if you want to pass the exam, you must spend a lot of effort.
8. Registered EIA Engineer Certificate
There was no demand for registered EIA engineers before, and the certificate of unpopular shed silver, but in recent years, the demand has increased year by year, and the salary is also, and it has gradually become more popular, but the difficulty is also quite large, and the pass rate is very low.
I have an email to contact you both.
Yes, the test conditions are sufficient.
Just find a unit to stamp, first talk to the unit, and then choose that unit when you register online, and then they will print out the registration form, and the unit will stamp it. >>>More
The University of Tokyo in Japan is the best in architecture, and it ranks well in the world, and it is quite powerful, so if you go to Japan after graduating from a bachelor's degree, you have to pass a language test. You can study locally or in Japan, and you can learn it in one year. I don't know too much about the specific information about going abroad, but I saw that the classmates around me said so.
All comprehensive universities and normal colleges have choreography and directing majors.
The University of Virginia, the Department of Architecture is quite good.