Is it better to learn CAD in 2010 or in 2012

2010 good.

Software that is too new is not necessarily stable enough; If you encounter a small problem in operation or something, most people don't install such a new version, and you can't find anyone to discuss; If you are looking for a reference book to learn CAD, it is difficult to find such a follow-up tutorial; The picture made is not compatible with other people's computers, others can't open it, and it brings trouble, so it is recommended to learn from the older ones, and it is better to use the older ones. For example, the 2007 one. But CAD2010 seems to have an additional parametric function, good can be learned, directly learn 2010 is also good, in fact, the commands in CAD are basically the same, the basic operation is not much different, unless you are particularly professional in the use of CAD.

1. In fact, there is not much difference between AutoCAD2010 and AutoCAD2012, and the basic functions are the same.

2. However, with the update of the software will add some new functions, the configuration requirements for the computer are getting higher and higher, the software will be updated with a version every year, but the computer may have to be used for a long time before it is replaced. So many designers are still using older versions of AutoCAD software.

3. The basic functions of each version are the same, users can choose a suitable software according to their own computer configuration, and choose a lower version on it.

First of all, you want to learn, in fact, they are all about the same, but 2004 is easy to use, it is easier for beginners to operate, but 2004 can not draw modeling graphics, nor can you open the 2004 version of the above file, you must convert it, troublesome, the modeling file must be above the 2007 version to be used, if you just learn two-dimensional graphic drawing, then you can learn 2004 can also be, I recommend learning 2008 version of CAD

Of course, there is a difference, 2012 is a high version, relatively speaking, function, operability is much stronger than 2004, if it is learning, I think it is still from 2004 to learn, this version of the software performance is stable and strong, understand the basics, and then go to learn the high version, because there is a foundation, so basically you can understand it, I wish you a happy study!

I tell you as someone who has been using CAD for more than seven years, you should learn CAD2012, 2012 adds a lot of new features, which is good for drawing, 2004 is just running a little faster, but if your computer is okay, 2012 will seem to be faster, especially when dealing with large pictures.

Decisive choice 2010, small and convenient, smooth operation, strong compatibility, mom no longer have to worry about the software crash in the middle of my drawing, other versions have been tried, or the 2010 version of the intimate.

The higher you go, the better the interface and the more complete the features.

It is worth upgrading, and the difference between the two is mainly in the following aspects:

First, the drawing function is different.

1. AutoCAD2010: Parametric drawing function can greatly improve your work efficiency by constraining drawing objects based on design intent. Geometric and dimensional constraints allow specific relationships and dimensions to remain unchanged between objects.

Second, the lead function is different.

Third, the drawing management is different.

1. AutoCAD2010: Sheet sets make it possible to set which drawings or parts should be included in the publishing operation, and the drawing list is more flexible than before.

There is still a big difference between 2010 and 2012, but at present, 2012 is not popular, many functions are new, there is no help, it is recommended not to upgrade! 2010 should be applied in major design institutes are not very popular, generally now 09 08 is used more.

If you're playing software, or if you have compulsive compulsion to upgrade, you can upgrade. The two versions are about the same, and the use is almost the same. Personally, I think the 10 version is enough. Hey.

CAD now 2012, 2013 too many functions are for 3D drawing, if 2D drawing does not need to upgrade.

The higher the version, the higher the computer configuration required, and the 3D drawing is optimized. If you usually just have a graphic design, it is recommended not to upgrade.

Versions before 2010 cannot export entities, while versions 2012 can export entities, which are in IGS format and can be opened by commonly used 3D software. If you use CAD to draw floor plans, it is almost the same whether you upgrade or not, because each version of CAD drawing floor plans is much the same. If you want to use it to draw 3D drawings, it is recommended to upgrade.

Because the drawings you draw generally have to be converted to a public format and opened by commonly used 3D software.

It's useless, there's no big difference. It is recommended not to upgrade.

However, it is recommended to install a small version conversion software with it.

There's no need to upgrade.,The main thing is to use it yourself.,The new version of the CAD is just a little less functional.,But in my opinion, it's not very useful.,The 2007 version of the CAD and the 2012 version of the CAD under my home,I've compared,The interface can change a little.,But it's almost the same.。

The color of the interface, black and white are all adjustable·· That's not the difference.

The lower version cannot open the higher version.

I have used the 08 version and the 12 version, the 2008 version of the operation interface is black, the 08 version and the 2010 version are almost the same, the 2012 version of the operation interface is white, I have used the 2008 version, and then use the 2012 version, some are not used to it, the operation interface has been completely changed, a bit like the difference between the 97 version of the office and the new version. The 2012 version is more functional.,Now schools generally use the 08 version.,If you learn the 08 version.,Will be basic.,The 12th version adapts very quickly.。

The 12th version can open the 08 version, the 08 version can't open the 12 version of the file, if you want to open the 12 version in the 08 version, you need to save it as the 08 version file format when you save the file in the 12th version.

Hello, I use the 2011 version, it's easier to use, fast and the functions have increased, because you use the earliest simplified version, I suggest the transition of the next 2011 version, so that we can see if the 2013 version can be used smoothly, sincerely answered, I hope to adopt, thank you.

Then continue with 2007.,You don't necessarily need the added functions later.,These versions of the installation package are more than 1 g.,Startup slows.,But the speed of operation doesn't seem to change.。

2O1O is relatively stable, the operation is definitely slower than 2oo8, the software has more functions, and the space occupied is also larger. It will take a little more time to run.

The three common functions are the same. The new features added in 2012 are less commonly used. I'm going to pick 2011 in the middle.

AutoCAD2012 version is user-friendly and easy to operate, which is the biggest difference from other versions, that is, there is a shortcut panel in the interface. Compared to the 2007 version of "features", of course, the 2012 version also has features.

You can buy it because the basic operation is the same.

Depending on your CAD level!

If you are a beginner, it is recommended to correspond directly to the version!

If it is to improve the practice, the basic metropolis, you can see, it is better to correspond to the good!

If you pretend to be 2012, I can give you the number! I'm using 2012 now!

The version is different, and the position of some tools inside has changed! The settings dialog is also different!

It is recommended that the version should fit the lz!

In fact, 2007 is definitely enough, if you are used to it, you don't need to change it.

With my multi-party comparison or CAD2010 is better to use!

Personally, I think 2010 is easier to use, but the versions after 2010 are basically the same

In 2010, the new version of some of the drawings could not be opened on the computer.

It has to do with personal habits, like different versions of office. If you prefer something new, use the latest.

Passing by the school teaching with 04.