Canon MP288 ink cartridge is out of water, should I buy ink and add it directly or change it to supp

Buying original ink cartridges, ** is relatively expensive, however, the printing quality is relatively guaranteed;

The use of continuous supply, ** is relatively cheap, however, the printing quality is weaker than the original ink cartridge, and there may be no after-sales guarantee;

The continuous ink supply system is referred to as continuous supply, which is a new ink supply method that has only appeared in the field of inkjet printers in recent years. Continuous ink supply system, which uses an external ink bottle and then connects with the ink cartridge of the printer with a conduit, so that the ink bottle continuously supplies ink to the ink cartridge, as the so-called"Continuous supply"。

The biggest benefit of a continuous ink supply system is that it is affordable, much cheaper than the original ink. Secondly, the amount of ink supply is large, and it is convenient to add ink.

Canon MP288, with the following cartridge models:

Standard: Black PG-815: 220 pages, Color CL-816: 244 pages;

Optional: Black Large Capacity PG-815XL: 401 pages, Color Large Capacity CL-816XL;

Please add a detailed explanation.

1. First of all, open the shell of the printer, and you can see the ink cartridge after opening.

2. Pull the cover plate of the ink cartridge, and the ink cartridge will automatically move to **.

3. After that, put the black ink cartridge of the printer into the ink cartridge compartment on the right.

4. After that, put the color ink cartridge into the ink cartridge compartment on the left side.

5. After closing the ink cartridge of the printer, the ink cartridge will automatically return to its position.

6. Close the case of the printer so that the ink cartridge is replaced.

Causes and solutions for Canon printers to run out of ink failure:

Cause 1: After adding ink to the printer, you need to reset the ink cartridge. If you do not reset the printer, it will indicate that there is no ink.

Solution: Remove the cartridge and reinstall the cartridge as prompted. Reset the cartridge counter. The printer will detect that the "new" cartridge has been replaced and show that the ink is full.

Cause 2: The printer is not used for a long time or in direct sunlight, resulting in clogged nozzles.

Solution: If the cartridge is not used up, you can conclude that the nozzle is clogged: remove the cartridge (for printers where the cartridge nozzle is not integrated, the nozzle needs to be removed), soak the nozzle in warm water for a while, be careful not to immerse the circuit board in water, otherwise the consequences will be unimaginable.

1. If the ink cartridge is fine, turn off the printer, and then connect it again, sometimes because of some problems with the system.

2. Or you should pay attention to the position of your printer, if there is a problem with the placement of the printer, it will also cause it to not work.

3. If it doesn't work, turn off the printer, then take out the ink cartridge, and then align it to install it. Not yet, check the driver, reinstall the driver.

4. If none of the above can be solved, it may be that the metal sheet on the cartridge has not been used for a long time, and the contact is poor, so you have to take out the cartridge, and then wipe it clean with an eraser, and you will find that the metal sheet on the cartridge is shiny. If you install it again, there will generally be no problem.

5. If the problem cannot be solved, it is necessary to consider whether the cartridge is damaged, and it is recommended to replace the cartridge.

6. It is recommended to contact professional maintenance personnel for maintenance.

1. First of all, open the shell of the printer, and you can see the ink cartridge after opening.

2. Pull the cover plate of the ink cartridge, and the ink cartridge will automatically move to **.

3. After that, put the black ink cartridge of the printer into the ink cartridge compartment on the right.

4. After that, put the color ink cartridge into the ink cartridge compartment on the left side.

5. After closing the ink cartridge of the printer, the ink cartridge will automatically return to its position.

6. Close the case of the printer so that the ink cartridge is replaced.

The steps to change the ink cartridge for Canon printer MP288 are as follows:

1. Pry open the lid of the cartridge with a knife, be careful not to pry the main body of the cartridge, the lid of the cartridge is as shown below, which is divided into 3 compartments is the color ink cartridge, that is, the 816 cartridge, which is installed on the left side of the printer.

2. After prying the lid, clean it before the sponge in the cartridge is taken out, so as to prevent the cleaned debris from falling into the cartridge. The purpose of cleaning is to be able to adhere tightly to the ink cartridge itself without air leakage when the easy-to-fill lid is replaced.

3. Take out the sponge in the ink cartridge, remember which color ink is filled in the three grids in the color cartridge, which can be seen from the sponge inside.

4. After cleaning, dry the ink cartridge. Wait until it is dry to combine the cartridge with the easy-to-fill lid. After closing the lid of the 815 black ink cartridge, pour a circle of 502 glue around and wait for it to dry.

When adding a lid to the 816 color cartridge, there is a gap between the three color grids, which can easily cause the color strings to mix together. On the left is the black ink cartridge, which is modified from the original 815 cartridge, and on the right is the color cartridge, which is modified from the original 816 cartridge.

During the modification of the cartridge, it is necessary to pour enough glue into the T slot, and also pour glue along the outer ring of each grid, so that after the lid is closed, it can basically ensure that the different compartments are separated without color, and then pour another circle of glue on the periphery of the lid after closing the lid.

6. After the cartridge is modified, it is filled with ink. Fill the ink before printing the test. There may be air in the ink cartridge outlet, which prevents some colors from coming out when printing.

The solution is to inject air into the ink port to increase the air pressure in the box, and the air from the ink port is excreted. At this point, the modification is complete.

The precautions during the retrofit process are:

1. Clean the cartridge and then use tweezers to clip out the sponge body in the cartridge.

2. When modifying the 816 color cartridge, be sure to fill the T slot with enough glue to ensure that there is no gap between the different color grids after the change.

3. After filling the ink, exhaust the air from each ink outlet.

After a few seconds after powering on, lift the upper cover, the ink cart will automatically move to the middle, and turn the lid on the ink cart back to remove the ink cartridge. Take out the new cartridge again, remove the seal, and put it on.

After a few seconds after powering on, lift the upper cover, click the maintenance button, the ink cart will automatically move to the middle, and turn the lid on the ink cart backwards to remove the ink cartridge. Take out the new cartridge again, remove the seal, and put it on.