What are the benefits of transferring the virtual memory of the C drive to another disk?

There are certain benefits.

Virtual memory. of the generation.

We all know that, though.

Running speed. Hard disks are not as good as memory, but memory cannot be compared with hard disks in terms of capacity. When running a program requires a lot of data and occupies a lot of memory, the memory will be "stuffed" and the data that is not used for the time being will be put into the hard disk, and the space occupied by this data is virtual memory.

Now we understand why the size changes so often.

Tips for using virtual memory.

1) Set the partition where the Windows system is located.

Page files. The size of the file is determined by the settings you have on your system. Here's how to set it up: Turn it on"My computer"of"attributes"Settings window, switch to"Advanced"

tab. In"Boot and failback"windowed"Write debug information"bar, if you are"None", set the page file size to about 2MB, if adopted"

Core memory. Storage"with"

For full memory storage, set the page file value to be larger, and the same as the page file value.

Physical memory. That's pretty much it.

System partitions. There is a contradiction here: if it is set, the system may read this part of the page file frequently, which will increase it.

System disk. Location.

Track. load, but if not set, when the system appears.

Blue Screen of Death. In particular, the dump file cannot be created.

Thus it cannot be carried out.

Program debugging. And the bug was reported. So the compromise is to set a smaller page file on the system disk, as long as it is sufficient.

2) Create a blank partition separately, set virtual memory in the partition, its minimum value is set to multiple of the physical memory, and the maximum value is set to 3 times of the physical memory, the partition is specially used to store page files, do not store any other files. The reason why a separate partition is used to set up virtual memory is mainly based on two considerations: first, because there are no other files on the partition, so the partition will not be generated.

Disk fragmentation. This ensures that the data read and write of the page file is not disturbed by disk fragmentation; Second, according to Windows' memory management technology, Windows will give priority to partitions that are not frequently accessed.

Page files, which also reduces the chance of reading page files in the system disk and reduces the pressure on the system disk.

3) Other hard disk partitions do not set any page files. Of course, if you have multiple drives, you can create a page file for each drive. When information is distributed across multiple page files, the hard disk controller.

Read and write operations can be performed on multiple disks at the same time. In this way, the performance of the system will be improved.

32-bit operating system.

Memory addressing range – 4GB

If the remaining space on your C drive is too small, moving the virtual memory to another drive will increase the speed of your computer.

If you have more than 5G of space left on your C drive, there is no point in transferring the virtual memory to another disk.

The specific steps are as follows:1. Open My Computer and click the Manage icon.

2. Click Disk Management.

3. Right-click and click Compress Volume.

4. Click the compression icon at the bottom.

5. Right-click on the additional new volume and select Delete.

6. Right-click to select the extended volume.

7. Then click Next.

8. Click Select Space, and then click Next in the middle below.

9. Click Done in the middle.

10. Now the other disks have been merged into the C drive, and the memory has also increased.

Sometimes we find that the virtual memory occupies too much, and even some caches on the computer will be placed in the virtual memory, so how to transfer it? The following is how I introduce you to the transfer method of computer virtual memory, welcome to read it.

The method of setting the virtual memory from the C disk to other disks (if it is in other disks, the setting method is the same): right-click on my computer -- Properties -- Advanced -- Performance Settings -- Advanced -- Virtual Memory Change -- Click on C drive -- select "No paging file" -- Settings, and the virtual memory next to the C drive will disappear at this time; Then select the D or F drive, select "Custom Size" - enter the values in the "Initial Size" and "Maximum" text boxes below - "Settings" - OK - Restart the computer, and the setup is complete.

<> precautions.

Before, we introduced how to move the virtual memory files of the C drive, but some netizens reported that the reboot after the move is still in the C drive, what happened? The following is how to solve the changes in the virtual memory of the computer that I have collected and sorted out from the beginning or in the C drive, I hope it will be helpful to you

Introduction to Virtual Memory:

Virtual memory is a technology for memory management in computer systems. It makes an application think that it has contiguous usable memory (a contiguous complete address space), when in reality it is usually divided into multiple physical memory fragments, and some are temporarily stored on external disk storage to exchange data when needed. At present, most operating systems use virtual memory, such as the "virtual memory" of the Windows family; Linux's "swap space", etc.

If the Windows 8 operating system is stuck on the Windows logo page when booting and cannot enter the system, and must be forced to shut down and restart to open it, you can adjust the virtual memory settings appropriately.

The solution of the computer virtual memory change from the beginning to the back or in the C drive

Method steps.

If the steps are gone.

There has been no change since then.

So proceed to the next step.

If you are an XP system.

Click on the Control Code panel.

Click on Account, and once you're in, click on Computer Administrator.

Then create a new user yourself, so that you can have permissions.

Another way is to right-click the property, for example, if you want to change the file and not go.

Click on security, and after entering, there are change administrator permissions, so that you can change all your permissions, you can change it, I hope it will help you, if not, then you are looking at other ways.

Because there are too many things in the C drive, what should I do if I want to transfer the virtual memory to a drive letter other than the C drive, so how to transfer the virtual memory to a drive letter other than the C drive? The following is my collection of how to transfer virtual memory to a drive letter other than the C drive, I hope it will be helpful to you

Method steps.

Go back to the desktop and right-click [This Computer] --Properties.

Click Advanced System Settings

Click Settings

Click Advanced -- Change.

Uncheck "Automatically manage paging file sizes for all drives" and select the No paging file <>

Click [Settings] and click [Yes] in the pop-up window to cancel the virtual memory of the C drive.

<> then transfer to other disks, such as E-drive, through virtual memory.

First check the e-drive, then select the size of the system management, and then click Settings.