HOW TO CHANGE TP LINK ROUTER PASSWORD AND SET UP WIRELESS WIFI

There are two passwords in the router, one is the wireless password and the other is the login password, and each describes how to change each one

1. Change the router login password.

1. Connect the router with the computer, open the browser, enter the general router address in the address bar or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

2. The option to change the login password is generally in the system tools.

3. On the new page, fill in the username and password you want to change. The premise is that you know the correct original username and original user password. Once you're done modifying, save it.

2. Change the wireless connection password.

1. Connect the router with the computer, open the browser, enter the general router address in the address bar or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

3. To set up the wireless wifi of the router, you need to set up the router system, and the steps are as follows:

2. Then open the browser and enter the management address and login password of the router.

<>3. After logging in to the background, click the setup wizard, and then fill in the corresponding parameters according to the wizard instructions.

<>6. After the wireless setting is completed, click Save, and then restart the router to use it normally.

2. Then enter the admin default account name and password are the same (there is also a prompt of the original data on the back of the router) to confirm.

3. After entering the router settings interface, click on System Tools on the left and click on Modify Administrator Password.

4. Click on the wireless settings on the left, select the wireless security settings, and change the wifi password.

5. After changing the password, click Save to restart the router.

1. Change the login password of the wireless router.

1. First of all, the router and the computer are connected, and then open the browser of the computer and enter the tplink route in the browser address bar.

<>2. After logging in to the TP-Link router management setting interface, click [System Tools before Elimination] in the menu - and then click [Change Login Password], fill in the new password according to the instructions and save it.

Two: Set the wireless wifi password.

1.First log in to the background of the router, select Wireless Settings, then log in to the TP-Link router management settings interface, click [Wireless Settings] on the left menu - Wireless Security Settings], and then change the PSK password (that is, WiFi password) to the new WiFi password you need on the right side of the modification interface, as shown in the figure below.

1. Router password modification process:

1. Type to turn on the router.

2. The original login password of the router is: the user name and password are admin, click to log in, and enter the router settings interface.

3. Select the system tool module and select the option to modify the login password.

4. Change the login password (login password).

5. After the modification is completed, click OK, and the router will restart and the login password will be modified.

2. Router wireless network settings.

1. Log in to the router settings interface and select Wireless Settings.

2. Wireless settings include: basic settings, security settings, MAC settings, advanced settings, host status, etc.

3. You can set the five items according to your own needs.

4. After the setting is completed, click Save to exit the router settings, and the settings are successful.

1. Change the login password of the wireless router.

1. First connect the router and the computer, then open the browser of the computer and enter the login address address of the tplink router in the browser address bar, and fill in the default admin password after logging in to log in to the background.

2. After logging in to the TP-Link router management settings interface, click [System Tools] in the menu - and then click [Change Login Password], and fill in the new password according to the instructions to save.

Two: Set the wireless wifi password.

1.First log in to the background of the router, select Wireless Settings, then log in to the TP-Link router management settings interface, click [Wireless Settings] on the left menu - Wireless Security Settings], and then change the PSK password (that is, WiFi password) to the new WiFi password you need on the right side of the modification interface, as shown in the figure below.

How to modify it.

1. First of all, in the browser, open the default login of the TP-Link router**:, and then use the administrator account and password to log in to the router settings management interface, 2. After logging in to the TP-Link router management settings interface, click [System Tools] on the left menu - and then click [Modify Login Password], and then in the login interface opened on the right, fill in the "original password" and fill in the "new password" 2 times, and click [Save] below after completion. The administrator of the router or the login password has been successfully changed, and this password should be changed to something that you are very familiar with, because when you open the login router in the future, you will need to use this new password to log in.

Suggested reference:

1. Connect the computer to the wireless router.

2. Select a route mode.

Set a router password].

1. Open the browser, enter the general router address in the address bar or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

2. Click: System Tools Login Password Modify --- Save.

Set a wireless wifi password].

1. Open the browser, enter the general router address in the address bar or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

2. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

1. How to change the WiFi password.

Connect your computer to any LAN port of the router, enter the settings page, and change the WiFi name (SSID) and password of the router.

The method is as follows: 1. Open the browser and enter the IP address of the router gateway in the address bar (there is a label on the back of the router, generally, enter the login username and password (generally admin);

2. After successful login, the running status will be displayed, click "Wireless Settings";

3. Click "Wireless Security Settings" again, and the wireless network name (SSID) is a name, which can be filled in casually, generally letters + numbers;

4. Then set the password, generally choose the WPA-PSK WPA2-PSK encryption method (password.

If you want 8-16 pieces, you can use alphanumeric.

combined); 5. After setting the password, click Save to prompt restart.

6. Click "Restart Router" in "System Tools" to restart the router.

Second, how to set up a wireless router.

If it is a broadband cat connection wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router.

Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing), enter the Internet access and password;

4. Set the SSID, encryption method and .

Password; 5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

1. Open the login address, and then use the administrator password to log in to the router management settings interface;

2. After logging in to the TP-Link router management settings interface, click [Wireless Settings] on the left menu - Wireless Security Settings], and then change the PSK password (that is, WiFi password) to the new WiFi password you need on the right side of the modification interface.

3. After the change, don't forget to click [Save] at the bottom

After changing the wifi wireless network password, you need to restart the tp-link router to take effect, the router reboot is in the system tool, you can find it, after you change the wifi password, restart the router to complete the wifi wireless network password modification.

The router setup process includes password settings. The specific steps are as follows:

1. Connect the computer to the router wifi, open the browser, enter enter, enter the browser settings interface, and the initial account and password of the router login are admin.

2. Select Setup Wizard Next.

3. The connection mode is ADSL connection, that is, PPPoE connection, the next step.

4. Enter the password account of the broadband and handle the business.

5. Set wireless attributes, including name, password, encryption mode, etc., and the attributes of wireless Internet access.

6. After the settings are complete, click Restart.

Once you're done, you'll be able to access the Internet.

Step 5 is to change the password.

Wireless routers need to be set up according to the Internet environment before they can be used.

Different Internet environments have different ways to set up wireless routers.

If it is a fiber modem wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router.

2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.