-
As far as the performance of the refrigerator is concerned, it is best to use it for many years, and do not stop using it due to seasonal changes. Because after the refrigerator is deactivated, the temperature in the box is the same as the surrounding ambient temperature, and the temperature in the box is very different from the temperature in the box when it is working normally.
Accelerated, premature crack damage. In addition, when the refrigerator is not working, the acidic (alkaline) trace food remaining on the surface of the evaporator at room temperature can easily corrode the evaporator, which will cause the evaporator to perforate and be damaged. In addition, after the refrigerator is out of use, the inside of the refrigerator is slowly warmed, which is also easy to cause the breeding and reproduction of various bacteria and microorganisms.
In the refrigerator that has been out of service for a long time, the lubricating oil in the compressor gradually penetrates into the bottom of the compressor housing, and as the temperature drops, the viscosity increases, and all the working parts in the machine are in a dry state. If the machine is turned on at this time, the compressor piston will work in a non-lubricated state, and the friction will increase, which may cause difficulty in starting, and the cylinder block (or piston) will be worn out more seriously after starting, which will affect the service life of the compressor, and even damage the compressor parts or the starting protector in serious cases.
If you really want to deactivate, you should unplug the fridge and get everything out of the fridge. Open the refrigerator door and wait for the frost to melt, defrost please do not sharpen, the evaporator is made of aluminum and is easy to leak. I wipe the refrigerator clean from the inside out with a clean cloth.
It is best to turn on the electricity once a month so that the compressor can run normally for half an hour to an hour before shutting down to preheat the compressor.
-
The above is quite detailed, and I would like to add that it is best to run it for 2 hours a month with the power off. It can protect the compressor from the phenomenon of cylinder jamming caused by lubricating oil precipitation. It can increase the life of the refrigerator.
-
First of all, empty the refrigerator and don't use the refrigerator as a storage object. It is necessary to turn off the power to the refrigerator, especially if there is no one at home, in case of disaster.
Please click Enter a description.
After powering off the refrigerator, wait for the frost in the refrigerator to melt. Wipe clean with a towel with warm water. Avoid moisture in the refrigerator. Use a mild detergent and wipe down the refrigerator. Dry the inside of the refrigerator.
Please click Enter a description.
It is best to separate a layer of paper between the sealing strip of the refrigerator and the refrigerator door, because if you do not use the refrigerator for a long time, the sealing strip may be deformed and affect future use.
Please click Enter a description.
Do not use the refrigerator, do not place any heavy objects on the top of the refrigerator. Where the refrigerator is placed, also keep the refrigerator stable and avoid tilting.
Please click Enter a description.
The refrigerator should be placed in a cool, dry place. Protect from sun exposure. And cover the refrigerator with a layer of cloth to prevent dust. Do not use plastic bags, plastic is not breathable.
Please click Enter a description.
Even if you don't use it for a long time, don't cut off the power of the refrigerator for a long time. Usually, once every two months, you need to power the refrigerator once, let the refrigerator run for an hour or two, and then turn it off later.
Please click Enter a description.
-
1. Turn on the machine regularly.
Generally, the machine needs to be turned on once a month to circulate the freon and lubricating oil in the pipeline. However, the power-on time should not be too long, 2 or 3 minutes is appropriate.
Powering on for too long may cause the temperature inside the refrigerator to drop, producing new frost and condensation, and increasing the humidity of the environment inside the refrigerator.
2. Clean up in time.
Be sure to clean your refrigerator properly before you stop using it. In addition to defrosting and simply wiping the inner wall, the refrigerator should also be cleaned and disinfected to ensure that there is no food residue inside the refrigerator.
3. Drying. After cleaning, the refrigerator should be placed in a ventilated environment, and the refrigerator door should be opened for drying. After that, do not put any food in the refrigerator, and it will be contaminated again if it is placed in the refrigerator.
Wait until the internal temperature of the refrigerator is the same as the room temperature and there is no humidity before closing the refrigerator door.
4. Sealing strip treatment.
Magnetic seals are usually not very clean, and even if they are not visible to the naked eye, they have already been infested many times by the food in the refrigerator. So, in the end, don't forget to protect the seals.
When handling, in addition to cleaning the sealing strip, talcum powder and other substances should be applied to prevent the sealing strip from sticking to the refrigerator during long-term idle use, which may cause damage.
-
First of all, all the items in the refrigerator should be taken out and the refrigerator should be thoroughly cleaned, because there are many items stored in the refrigerator, which can easily lead to the breeding of bacteria, so the refrigerator needs to be thoroughly cleaned once; If you are afraid that the refrigerator will be damaged if it is not powered on for a long time, you can occasionally power the refrigerator for a while; Sandwiching the newspaper between the refrigerator and the door seal prevents the refrigerator and door seal from sticking together.
If you plan to leave the refrigerator unused for a long time, be sure to unplug it and remove all the contents of the refrigerator. If there is frost in the refrigerator, open the refrigerator door and wait for the frost to melt, and do not use sharp objects to remove the refrigerator to avoid damage to the refrigerator.
-
Answer: When the refrigerator is not used for a long time, you should unplug the refrigerator power plug to cut off the power supply. Then clean the inside of the refrigerator with detergent and wipe it clean with a clean towel.
-
First of all, all the items in the refrigerator should be taken out and the refrigerator should be thoroughly cleaned, because there are many items stored in the refrigerator, which can easily lead to the breeding of bacteria, so the refrigerator needs to be thoroughly cleaned once; If you are afraid that the refrigerator will be damaged if it is not powered on for a long time, you can occasionally power the refrigerator for a while; Sandwiching the newspaper between the refrigerator and the door seal prevents the refrigerator and door seal from sticking together.
-
If you don't use the refrigerator for a long time, you can unplug the power and store the refrigerator in a cool and dry place, pay attention to: 1. Empty the food inside the refrigerator to avoid waste and deterioration;
2. Clean the inside of the refrigerator, and you need to wait for it to dry before closing the refrigerator door, so as not to use it for a long time and breed bacteria and odors;
3. The refrigerator door seal should be padded with paper or other things to prevent the door seal from sticking to the box;
4. It is best to turn on the power once every 1-2 months, and each time the power is turned on for 2-4 hours, so that the refrigerator can be better maintained.
-
1. Unplug the refrigerator and take out all the things in the refrigerator. Open the refrigerator door until the frost melts, then wipe the refrigerator clean from the inside out with a clean rag.
2. Set the thermostat adjustment to "stop" or "0" or "max" (strong cold point) to make the thermostat elastic to a natural state and prolong the life.
3. You can apply some lime powder on the door seal to prevent the box and the door seal from sticking;
-
Unplug the refrigerator and get everything out of the fridge. Open the refrigerator door and wait for the frost to melt, defrost please do not use sharp tools, the evaporator is made of aluminum, which is easy to puncture. Then use a clean cloth to wipe the refrigerator clean from the inside out.
There must be no water.
-
1. Start the motor every once in a while, one or half a month, let the freon inside cycle for 2 or 3 minutes, and move it appropriately like a person to be more "healthy".
2. When the refrigerator is out of use for a long time, the power should be cut off first, all the food in the box should be taken out, the inside and outside of the box should be cleaned up, and the door of the box should be opened for several days to fully dry the box and dissipate the odor in the refrigerator.
3. Don't ignore the cleaning of the door seal strip, dilute the bleach with 10 times the water, moisten it with a toothbrush, and finally wash the bleach with water. The rubber strip is dirty and easy to age, which will affect the sealing of the refrigerator and increase power consumption.
-
First of all the food in the fridge should be cleaned out, and then disconnected from the power, hope mine is helpful to you. Hope!
-
It should be disinfected, unplugged and then. Re-brush inside and out.
-
1. Organize the refrigerator. If you don't use the refrigerator at home for a long time, you must unplug it completely, and at the same time take out all the contents of it, and never continue to put it in the refrigerator. And when you remove all the contents of the refrigerator, wipe it down with a clean towel.
2. The door seal should be dealt with. When your refrigerator is no longer in use, use paper or other things to seal the door, the main purpose of which is to prevent the seal from sticking to the box. Also, if you don't need to use the refrigerator for a long time, you can also apply some lime powder to the seal.
3. Placement of refrigerators. Since the refrigerator has a very low freezing point of refrigerant, don't put the refrigerator in a place that is too cold, it is better to put it in a place with a higher temperature. At the same time, remember not to seal the refrigerator!
-
The refrigerator is the most taboo to use without power for a long time, and it is easy to cause corrosion, damage and leakage of the system pipeline, resulting in refrigerant liquid, so that the refrigerator can not be refrigerated.
Here's how to solve it:
One is to cut off the power supply and power on every half a month or a month to let the compressor work for a few hours.
The second is to keep the power on and adjust the temperature in the refrigerator to the highest, which is also more energy-efficient. If the thermostat is mechanical, adjust 1st gear.
The third is to buy a 10 yuan refrigerator companion online, also called the refrigerator bosom friend, adjust the start-up time to the shortest, about 5 minutes, and then adjust the shutdown time to the longest, about two hours, so that the use is particularly power-saving.
Of course, there is an impact, the longer the compressor works, the more power it consumes. >>>More
1. The mouse pad is uneven. When encountering the mouse movement, we first need to check whether the mouse pad is flat. If it is not flattened, it will cause the mouse to move, and we should also clean the mouse pad. >>>More
Daily maintenance and maintenance of electric treadmill The use and precautions of the product. >>>More
Proctology! Long-term constipation is likely to have anorectal diseases, such as irritable bowel syndrome, hemorrhoids, anal fissures, etc., and colon problems cannot be ruled out! >>>More
The main problem is that when you use the mouse, the shoulder muscles are unconsciously in a state of tension, which causes spasms and pain in the shoulder muscles over time. It is recommended that you change the habit of using the mouse: let the elbow joint of the right hand be placed on the table, or make a special cushion to raise the position of the right armrest on the chair, so that the right elbow joint can have a support point, so that the whole shoulder joint can be relaxed, and there will be no longer pain in the right shoulder after using the computer for a long time!